AIC Pavo Owner's manual

UM_Pavo_v1.8_010821

Pavo

Server Motherboard

User's Manual

Content

Table of Contents

Preface �� i

Safety Instructions �� ii

About This Manual �� iii

Chapter 1� Product Features �� 1

1.1 Components .............................................................................................. 1

1.2 Specifications ............................................................................................ 2

1.3 Feature ....................................................................................................... 3

Chapter 2� Hardware Setup �� 4

2.1 Central Processing Unit Setup ................................................................. 4

2.1.1 Processor Installation ..........................................................................................4

2.2 System Memory ........................................................................................ 7

2.2.1 Placement ............................................................................................................. 7

2.2.2 DIMM Population .................................................................................................8

2.2.3 DCPMM DIMM Population ................................................................................10

2.2.4 Memory Installation ...........................................................................................11

Chapter 3� Motherboard Settings �� 12

3.1 Block Diagram ......................................................................................... 12

3.2 Content List ............................................................................................. 13

3.3 Placement ................................................................................................ 14

3.4 Connector and Jumper ........................................................................... 15

3.4.1 Connector ...........................................................................................................15

3.4.2 Jumper ................................................................................................................19

3.5 System LED Indicator .............................................................................. 21

3.5.1 Front Panel .........................................................................................................21

3.5.2 Rear I350 LAN ...................................................................................................21

3.5.3 Rear PCH LAN ...................................................................................................22

3.5.4 Rear UID and Internal LED..................................................................................23

Chapter 4� BIOS Configuration Settings �� 24

4.1 Navigation Keys ....................................................................................... 24

4.2 BIOS Setup ............................................................................................... 25

4.2.1 Menu ...................................................................................................................25

4.2.2 Startup ................................................................................................................25

4.2.3 Update .................................................................................................................28

4.2.4 DCPMM Setup ....................................................................................................30

4.3 Main ......................................................................................................... 35

4.3.1 Main ....................................................................................................................35

4.4 Advanced ................................................................................................. 36

4.4.1 Peripheral Configuration .................................................................................... 36

4.4.2 Video Configuration ...........................................................................................36

4.4.3 OEMBoard Function ...........................................................................................36

4.4.4 SIO AST2500 ......................................................................................................37

4.4.5 Socket Configuration .........................................................................................37

4.4.6 ME Configuration ...............................................................................................43

4.4.7 PCH Configuration .............................................................................................44

4.4.8 H2O IPMI Configuration .....................................................................................45

4.4.9 APEI Configuration .............................................................................................45

4.4.10 Console Redirection .........................................................................................45

4.4.11 H2O Event Log Config Manager ......................................................................46

4.4.12 H2oUve Configuration .....................................................................................46

4.5 Security .................................................................................................... 47

4.5.1 Security ...............................................................................................................47

4.6 Power ....................................................................................................... 48

4.6.1 Power ..................................................................................................................48

4.7 Boot .......................................................................................................... 49

4.7.1 Boot .....................................................................................................................49

4.8 Exit ............................................................................................................ 50

4.8.1 Exit.......................................................................................................................50

Chapter 5� BMC Configuration Settings �� 51

5.1 Method 1 (Use the BIOS Setup) .............................................................. 51

5.2 Method 2 (Use a Dos Tool - Syscheck) .................................................. 54

5.3 Login ......................................................................................................... 56

5.4 Web GUI .................................................................................................. 57

5.4.1 Menu Bar .............................................................................................................57

5.4.2 User Information and Quick Button ..................................................................58

5.4.3 Dashboard ..........................................................................................................59

5.4.4 Sensor ................................................................................................................59

5.4.5 FRU Information .................................................................................................59

5.4.6 Logs and Report .................................................................................................60

5.4.7 Settings .............................................................................................................. 60

5.4.8 Remote Control ..................................................................................................61

5.5 Firmware Update ..................................................................................... 63

5.5.1 Requirement .......................................................................................................63

5.5.2 Update Guide ...................................................................................................... 63

5.5.3 SOC Flash Update ..............................................................................................69

Chapter 6� Technical Support �� 71

Content

This document contains proprietary information about

AIC® products and is not to be disclosed or used except in

accordance with applicable agreements.

Document Release History

Release Date Version Update Content

2017 1 User's Manual release to public.

July

2017

1.1 1. BIOS update.

December

2018

1.2

1. New Cover.

2. Specification update.

May

2019

1.3 DIMM update.

September

2019

1.4

1. DCPMM Population.

2. BIOS update.

3. HW update.

October

2019

1.5 Hardware Spec update.

November

2019

1.6

1. Datasheet update.

2. SW update.

December

2019

1.7 BIOS update.

January

2021

1.8 Manual cover update.

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photo-static, recording

or otherwise, without the prior written consent of the manufacturer.

Trademarks

All products and trade names used in this document are trademarks or registered

trademarks of their respective holders.

Changes

The material in this document is for information purposes only and is subject to change

without notice.

Warning

1. A shielded-type power cord is required in order to meet FCC emission limits and also

to prevent interference to the nearby radio and television reception. It is essential

that only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. You are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Disclaimer

AIC® shall not be liable for technical or editorial errors or omissions contained herein.

The information provided is provided "as is" without warranty of any kind. To the extent





damages relating to the procurement of substitute products or services; or damages

for loss of data, or software restoration. The information in this document is subject to

change without notice.

Instruction Symbols

Special attention should be given to the instruction symbols below.

NOTE

This symbol indicates that there is an explanatory or

supplementary instruction.

CAUTION

This symbol denotes possible hardware impairment. Upmost

precaution must be taken to prevent serious harware damage.

WARNING

This symbol serves as a warning alert for potential body

injury. The user may suffer possible injury from disregard or

lack of attention.

Preface

i

When installing, operating, or performing maintenance on this equipment, the following

safety precautions should always be taken into account in order to reduce the risk of fire,

electric shock, and personal injury.

Carefully read the safety instructions below before using this product.

• Observe all of the warning and instruction signs distinctively marked on the product.

• Before performing system installations, please consult the User’s Manual provided

with this product.

• Do not place this product on an uneven or weak surface (unstable cart, stand, table,

ect.) that might induce the product to fall and sustain serious damage.

• Install only the equipment or device identified in the User’s Manual. Deploying other

equipment or device with this motherboard could invoke improper connection of

circuitry that leads to fire or personal injury.

• This product should only be operated with the type of power source indicated on the

marked label. If you are questionable about which type of power supply is used in your

area, consult your dealer or local Power Company.

• Disconnect the power supply module before removing power from the system.

• Unplug this product from the wall outlet before cleaning. Use a damp cloth for

cleaning. Do not use liquid cleaners or aerosol cleaners.

• Do not use this product near a water source, including faucet and lavatory.

• Never spill liquids of any kind on this product.

• Never shove objects of any kind into this product’s open slots, as they may touch

dangerous voltage points or short out parts and could result in fire or electric shock.

• Do not block or cover slots and openings in this unit, as they were made for ventilation

and prevent this unit from overheating. Do not place this product in a built-in

installation unless proper ventilation is available.

• Do not disassemble this product. This product should only be taken apart by trained

personnel. Opening or removing covers and circuit boards may expose you to electric

shock or other risks. Incorrect reassembly can also cause electric shock when the

unit is subsequently used.

• Risk of explosion is possible if battery is replaced with an incompatible type. Dispose

of used batteries accordingly.

• This product is equipped with a three-wire grounding type plug, a plug with a third

(grounding) pin. As a safety feature, this plug is intended to fit only into a grounding

type power outlet. If you are unable to insert the plug into the outlet, contact your

electrician to replace the outlet. Do not remove the grounding type plug or use a

3-Prong To 2-Prong Adapter to circumvent the safety feature; doing so may result in

electric shock and/or damage to this product.

Safety Instructions

Thank you for selecting and purchasing the Pavo Serverboard.

This user's manual is provided for professional technicians to perform easy hardware

setup, basic system configurations, and quick software startup. This document pellucidly

presents a brief overview of the product design, device installation, and firmware settings

for the Pavo motherboard. For the latest version of this user's manual, please refer to the

AIC® website: https://www.aicipc.com/en/productdetail/20854.

Chapter 1 Product Features

This chapter delivers the overall layout of the product, including the fundamental

components on the motherboard, design specifications, and noteworthy features. Pavo is

an ideal server grade motherboard that is specifically designed to accommodate diverse

enterprises for managing heavy workloads, databases, nearline applications, and cloud

deployments. This product supports thee Intel® Xeon® Scalable Processors with Socket

P0 (LGA-3647) and a memory support 16 DDR4 2400/2666 MHz accross 6 memory

channels per CPU.

Chapter 2 Hardware Setup

This chapter displays an easy installation guide for assembling the CPU (Central

Processing Unit) and memorymodule. Utmost caution for proceeding to set up the

hardware is highly advised. The components on the motherboard are highly fragile and

vulnerable to exterior influence. Do not attempt to endanger the device by placing the

device in a potentially unstable or hazardous surroundings, including positioning the

device on an uneven grounds or humid environments.

Chapter 3 Motherboard Settings

This chapter elaborates the overall layout of the server motherboard, including

multifarious connectors, jumpers, and LED descriptions. These descriptions assist users

to configure different settings and functions of the motherboard, as well as to confirm the

location of each connector and jumper.

Chapter 4 BIOS Configuration Settings

This chapter introduces the key features of BIOS, including the descriptions and option

keys for diverse functions. These details provide users to effortlessly navigate and

configure the input/output devices.

Chapter 5 BMC Configuration Settings

This chapter illustrates the diverse functions of IPMI BMC, including the details on logging

into the web page and assorted definitions. These descriptions are helpful in configuring

various functions through Web GUI without entering the BIOS setup. For more information

of BMC configurations, please refer to IPMI BMC (Aspeed AST2500) User's Manual for a

more detailed description.

Chapter 6 Technical Support

For more information or suggestion, please contact the nearest AIC® corporation

representative in your district or visit the AIC® website: https://www.aicipc.com/en/index.

It is our greatest honor to provide the best service for our customers.

About This Manual

1

PAVO

Product features and specifications are subject to change without notice�

LGA3647 Socket P0 for Intel

Xeon

Processor Skylake-SP (CPU0)

8 x DDR4 DIMM Slots

6 Channels (for CPU0)

2 x 10GbE SFP+

2 x GbE RJ45

VGA Port

2 x USB 3.0

COM Port by

Audio Jack

RJ45 for BMC

Management

Aspeed AST2500

Video + BMC

AIC MAX I/O™ 2.0 PCIe Gen3 x

Total Supports 64 Lanes + 5 x SATA + 1 x USB 2.0

OCP Mezzanine V2.0 Connector

8 x DDR4 DIMM Slots

6 Channels (for CPU1)

1 x Mini-SAS HD

Supports 4 x SATA3

(Lewisburg)

2 x SATA3

LGA3647 Socket P0 for Intel

Xeon

Processor Skylake-SP (CPU1)

Chapter 1� Product Features

1�1 Components

2

Chapter 1. Product Features

1�2 Specifications

System

Processor

Support

Intel® Xeon® Scalable Processors

(Skylake/Cascade Lake/Cascade Lake Refresh)

CPU TDP

165W

UPI Speeds

10.4 GT/s, 9.6 GT/s

Socket Type

Socket P0 (LGA-3647 Socket)

System

Memory

• 6 x memory channels per CPU,

2 channels with 2DPC + 4 channels with 1DPC

• 16 x DIMM slots support:

DDR4 2666/2400MHz RDIMM/LRDIMM

(feature supports up to DDR4 2933MHz

by next gen. process upgrade)

- up to 256GB RDIMM SRx4

- up to 512GB RDIMM DRx4

- up to 2048GB RDIMM 3DS 8Rx4

- up to 1024GB LRDIMM QRx4

- up to 2048GB LRDIMM 3DS 8Rx4

• Intel® Optane™ DC Persistent Memory

(Apache Pass) support

Expansion

Slots

• 1 x AIC Max I/O® supports: PCIe Gen3

total 64 lanes + 5 x SATA + 1 x USB2.0

• 1 x OCP Mezzanine V2.0 support PCIe

Gen3 x16

System BIOS

BIOS Type

Insyde UEFI BIOS

BIOS

Features

• ACPI

• PXE

• WOL

• AC loss recovery

• IPMI KCS interface

• SMBIOS

• Serial console

redirection

• BIOS Boot

• BIOS Recovery

Mode

• SRIOV

• iSCSI

• TPM

• PCIe Hotplug

On-board

Devices

SATA

Intel® Lewisburg PCH on-chip solution

• 4 x SATA 6.0 Gb/s (by 1 x mini-SAS HD) +

2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin)

• 5 x SATA 6.0 Gb/s (by Max I/O®)

BMC

Aspeed AST2500 Advanced PCIe Graphics &

Remote Management Processor

• Baseboard Management Controller

• Intelligent Platform Interface 2.0 (IPMI 2.0)

• iKVM, Media Redirection, IPMI over LAN,

Serial over LAN

• SMASH Support

• HTML5

Network

Controller

• Intel® PCH (Lewisburg) Integrated 10GbE LAN

Controller with dual SFP+ rear connectors

• Intel® I350 dual ports RJ45 rear connectors

• Realtek RTL8211E GbE Ethernet for BMC

dedicated management port

Graphics

Aspeed AST2500 Advanced PCIe Graphics &

Remote Management Processor

• PCIe VGA/2D Controller

• 1920x1200@60Hz 32bpp

Input/Output

SATA

11 x SATA 6.0 Gb/s ports

• 4 x SATA 6.0 Gb/s (by 1 x mini-SAS HD) +

2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin) +

5 x SATA 6.0 Gb/s (by Max I/O®)

LAN

• 2 x 10GbE SFP+

• 2 x GbE RJ45

• 1 x GbE RJ45 dedicated to BMC management

USB

• 2 x USB 3.0 Type A connectors

• 1 x USB internal pin-header to support

2 x USB3.0/USB2.0

• 1 x USB internal pin-header to support

2 x USB 2.0

VGA

• 1 x external VGA port

• 1 x internal VGA pin-header

(share with external VGA port)

Serial Port

• 1 x external COM port by 3.5mm phone jack

• 2 x internal COM pin-headers

Other

• 1 x TPM 2.0 onboard

3

Chapter 1. Product Features

The Pavo server board integrates Intel® Xeon® Scalable processors and 16 DDR4 DIMM

2400/2666MHz (feature support up to DDR4 2933MHz by Cascade Lake upgrade) to offer

support for greater capacity, durability, and proficiency for our customers. Highlighting

Intel® Xeon® Scalable processors, which are emphasized for its optimized performance,

efficiency, and security, this product enhances these advantages by implementing the

microarchitecture, AIC® Max I/O™ 2.0 to maximize system expansion and operating speed.

In addition to integrating speed and system expansion to the server board, Pavo offers

immediate and efficient management with Onboard Baseboard Management Controller

and greater I/O extension. Featuring IPMI 2.0 and Aspeed AST2500 Advanced PCIe

Graphics, the server board offers support for iKVM, Media Redirection, IPMI over LAN,

Serial over LAN, HTML5, and Redfish.

• Supports Intel® Xeon® Scalable Processors for highest server performance and

improved power efficiency

• Supports 16 DDR4 DIMM slots for maximum memory performance

• AIC® Max I/O™ supports 64 PCIe Gen3 lanes

• Supports one OCP Mezzanine V2.0 up to PCIe Gen3x16 extension

• Onboard dual 10GbE SFP+ ports by Intel® Lewisburg PCH and dual GbE ports by

Intel® Ethernet Controller I350

• Onboard Baseboard Management Controller for system management and IPMI control

•

• Embedded components for 5+ year long life

• Rackmount Technology Extension (RTX) form factor utilizes full internal chassis

volume for optimum I/O configurations

1�3 Feature

4

This chapter provides the graphic detail and basic instruction for hardware installation.

Turn off the system and unplug all peripheral devices before proceeding.

2�1 Central Processing Unit Setup

The serverboard supports dual Xeon scalable processors and Socket P0 (LGA-3647).

2�1�1 Processor Installation

To ensure a safe and easy setup, you need to prepare before installation:

 a T20 Torx screwdriver

 ESD wrist strap/mat and conductive foam pad

 Safe and stable environment

CAUTION

      

or any foreign objects are pressed against them. Please keep the socket protective cover on

when the processor is not installed.

CAUTION

When unpacking a processor, hold the processor only by its edges to avoid touching the

contacts.

Standard Processor Assembly:

A standard processor assembly is comprised of PHM(Processor Heatsink Module)

components and processor socket assembly.

Chapter 2� Hardware Setup

This information is provided for professional technicians only.

Heat sink

Standard

Processor Clip

Standard

Processor

Bolster Plate

Precsessor

Socket

PHM Components

Processor

Socket Assembly

5

Chapter 2. Hardware Setup

Processor Socket Assembly:

The server board includes two processor sockets (LGA-3647), supports one or two of

the Intel® Xeon® Processor Scalable Family and has a Thermal Design Power (TDP)

of up to 165W on selected models.

PHM (Processor Heatsink Module) Component:

This information is provided for professional technicians only.

Non Frabic

Processor

Non Frabic

Processor Clip

Heat sink

6

Chapter 2. Hardware Setup

The PHM sits level with the processor socket assembly. The PHM is NOT installed

properly if it does not sit level with the processor socket assembly. Once the PHM is

seated over the processor socket assembly, the four heat sink torque screws must be

tightened in order as shown below.

Processor Heat Sink – Top View with Screw Tightening Order

CAUTION

Failure to tighten the heatsink screws in the specified order may cause damage to the

processor socket assembly. Heat sink screws should be tighted to 12 in-lbs torque

according to the indicated order on the top of the heatsink label.









7

Chapter 2. Hardware Setup

This server board supports up to sixteen DDR4 2400 and 2666 Registered ECC DRAM/

Load-Reduced DIMM (LRDIMM).

2�2�1 Placement

CPU0CPU0CPU0CPU0 CPU1CPU1CPU1CPU1

DIMMCDIMMC

DIMMBDIMMB

DIMMA1DIMMA1

DIMMA2DIMMA2

2�2 System Memory

DIMMJDIMMJ

DIMMHDIMMH

DIMMG1DIMMG1

DIMMG2DIMMG2

DIMM_K2DIMM_K2

DIMM_K1DIMM_K1

DIMM_LDIMM_L

DIMM_MDIMM_M

DIMM_D2DIMM_D2

DIMM_D1DIMM_D1

DIMM_EDIMM_E

DIMM_FDIMM_F

8

Chapter 2. Hardware Setup

2�2�2 DIMM Population

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

DIMM Numbers DIMM ARRANGMENT

2 DIMMs

CPU0 CPU1

JDIMM_C JDIMM_J

CPU0

CPU1

4 DIMMs

CPU0 CPU1

JDIMM_C JDIMM_J

JDIMM_A1 JDIMM_G1

CPU0

CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

6 DIMMs

CPU0 CPU1

JDIMM_C JDIMM_J

JDIMM_A1 JDIMM_G1

JDIMM_F JDIMM_M

CPU0

CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

8 DIMMs

CPU0 CPU1

JDIMM_CJDIMM_J

JDIMM_A1 JDIMM_G1

JDIMM_D1 JDIMM_K1

JDIMM_FJDIMM_M

CPU0

CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

9

Chapter 2. Hardware Setup

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_D1

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_K1

JDIMM_M

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_A2

JDIMM_D1

JDIMM_E

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_G2

JDIMM_K1

JDIMM_L

JDIMM_M

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_A2

JDIMM_D2

JDIMM_D1

JDIMM_E

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_G2

JDIMM_K2

JDIMM_K1

JDIMM_L

JDIMM_M

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_D1

JDIMM_E

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_K1

JDIMM_L

JDIMM_M

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_D1

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_K1

JDIMM_M

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_A2

JDIMM_D1

JDIMM_E

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_G2

JDIMM_K1

JDIMM_L

JDIMM_M

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_A2

JDIMM_D2

JDIMM_D1

JDIMM_E

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_G2

JDIMM_K2

JDIMM_K1

JDIMM_L

JDIMM_M

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

JDIMM_C

JDIMM_B

JDIMM_A1

JDIMM_D1

JDIMM_E

JDIMM_F

JDIMM_J

JDIMM_H

JDIMM_G1

JDIMM_K1

JDIMM_L

JDIMM_M

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

CPU0CPU0 CPU1CPU1

JDIMMD2

JDIMMK2

JDIMML

JDIMMM

JDIMMK1JDIMMD1

JDIMME

JDIMMF

JDIMMC

JDIMMB

JDIMMA1

JDIMMA2

JDIMMJ

JDIMMH

JDIMMG1

JDIMMG2

10

Chapter 2. Hardware Setup

2�2�3 DCPMM DIMM Population

Asymetric population

CPU0

DIMM JDIMMF JDIMME JDIMMD2 JDIMMD1 JDIMMC JDIMMB JDIMMA2 JDIMMA1

App Direct

Mode

DRAM1 DRAM1 - DRAM1 DRAM1 DRAM1 DCPMM DRAM1

App Direct

Mode *

DRAM1 DRAM1 - DRAM1 DRAM1 DRAM1 DCPMM DRAM1

NOTE

App Direct* : App Direct Mode with no DCPMM DIMM in second socket.

Symetric population

CPU0 CPU1

DIMM JDIMMF JDIMME JDIMMD2 JDIMMD1 JDIMMC JDIMMB JDIMMA2 JDIMMA1 JDIMM JDIMML JDIMMK2 JDIMMK1 JDIMMJ JDIMMH JDIMMG2 JDIMMG1

App Direct

Mode

DRAM1 DRAM1 DCPMM DRAM1 DRAM1 DRAM1 DCPMM DRAM1

- - - - - - - -

Memory

Mode

DRAM2 DRAM2 DCPMM DRAM2 DRAM2 DRAM2 DCPMM DRAM2

- - - - - - - -

Mixed

Memory

Mode

DRAM4 DRAM4 DCPMM DRAM4 DRAM4 DRAM4 DCPMM DRAM4

- - - - - - - -

App Direct

Mode

DRAM1 DRAM1 DCPMM DRAM1 DRAM1 DRAM1 DCPMM DRAM1 DRAM1 DRAM1 DCPMM DRAM1 DRAM1 DRAM1 DCPMM DRAM1

Memory

Mode

DRAM2 DRAM2 DCPMM DRAM2 DRAM2 DRAM2 DCPMM DRAM2 DRAM2 DRAM2 DCPMM DRAM2 DRAM2 DRAM2 DCPMM DRAM2

Mixed

Memory

Mode

DRAM4 DRAM4 DCPMM DRAM4 DRAM4 DRAM4 DCPMM DRAM4 DRAM4 DRAM4 DCPMM DRAM4 DRAM4 DRAM4 DCPMM DRAM4

NOTE

DIMM Type RDIMM 3DS RDIMM LRDIMM 3DS LRDIMM Capacity

DRAM1

   

Any Capacity

DRAM2

   



DRAM3

  

Any Capacity

DCPMM Any Capacity (Uniformly for all channels for system configuration)

NOTE

Please abide to the DCPMM population rules listed below for your system to function accordingly.

• There is only a maximun of 1 DCPMM in each channel.

• Populate DCPMM DIMM on DIMM0 first.

11

Chapter 2. Hardware Setup

2�2�4 Memory Installation

Step 1 Unlock the dimm socket by pressing the retaining clips outward.

Step 2 Insert the memory module into the slot. Make sure that the DIMM notch is

accurately positioned.

Step 3 Close the retaining clips to complete installation.

DIMM n

otch

12

Chapter 3. Motherboard Settings

This section describes the jumpers, internal connectors, and internal LED settings on the

Pavo motherboard. The motherboard layout and jumper settings are listed below.

3�1 Block Diagram

Chapter 3� Motherboard Settings

Page is loading ...

AIC Pavo Owner's manual

AIC Pavo Owner's manual

Related papers

Other documents