Gigabyte H261-H60 User manual

H261-H60

HCI Server – Intel DP 2U 4 Nodes Server

User Manual

Rev. 1.0

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 User Manual: detailed information & steps about the installation, conguration and use of this

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

software component (e.g. BMC rmware, rail-kit) compatible with this product.

 Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents.

For More Information

For related product specications, the latest rmware and software, and other information please visit our website at

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller

portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

https://esupport.gigabyte.com/ to create a new support ticket

For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email:

server[email protected]

Conventions

The following conventions are used in this user's guide:

NOTE!

Gives bits and pieces of additional

information related to the current topic.

CAUTION!

Gives precautionary measures to

avoid possible hardware or software problems.

WARNING!

Alerts you to any damage that might

result from doing or not doing specic actions.

Server Warnings and Cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

• Unplug the power cord from the power supply to disconnect power to the equipment.

• Do not route the power cord where it can be walked on or pinched by items placed against it.

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

WARNING!

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal

system components to cool before touching them.

WARNING!

This server is equipped with high speed fans. Keep away from hazardous moving fan

blades during servicing.

CAUTION!

• Do not operate the server for long periods with the access panel open or removed. Operat-

ing the server in this manner results in improper airow and improper cooling that can lead to

thermal damage.

• Danger of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer’s instructions.

Electrostatic Discharge (ESD)

CAUTION!

ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU

PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE,

PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP AT-

TACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR SERVER

WHEN HANDLING PARTS.

Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by

their edges without any component and pin touching. After removing a board from its protective

wrapper or from the system, place the board component side up on a grounded, static free sur-

face. Use a conductive foam pad if available but not the board wrapper. Do not slide board over

any surface.

System power on/off: To remove power from system, you must remove the system from rack.

Make sure the system is removed from the rack before opening the chassis, adding, or removing

any non hot-plug components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be present

on power, telephone, and communication cables. Turn off the system and discon-nect the cables

attached to the system before servicing it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage drives, boards, and

other parts. We recommend that you perform all procedures in this chapter only at an ESD work-

station. If one is not available, provide some ESD protection by wearing an antistatic wrist strap

attached to chassis ground (any unpainted metal surface on the server) when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely sensi-tive to

electrostatic discharge (ESD). Hold boards only by their edges. After removing a board from its

protective wrapper or from the system, place the board component side up on a grounded, static

free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide

board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over

two jumper pins. Some jumpers have a small tab on top that can be gripped with n-gertips or

with a pair of ne needle nosed pliers. If the jumpers do not have such a tab, take care when us-

ing needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the

pliers, never the wide sides. Gripping the wide sides can dam-age the contacts inside the jumper,

causing intermittent problems with the function con-trolled by that jumper. Take care to grip with,

but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the board may

bend or break.

CAUTION!

Risk of explosion if battery is replaced incorrectly or with an incorrect type. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of used bat-

teries according to the manufacturer’s instructions.

- 7 -

Table of Contents

Chapter 1 Hardware Installation ...................................................................................11

1-1 Installation Precautions .................................................................................. 11

1-2 Product Specications .................................................................................... 12

1-3 System Block Diagram ................................................................................... 16

Chapter 2 System Appearance ..................................................................................... 17

2-1 Front View ...................................................................................................... 17

2-2 Rear View ....................................................................................................... 17

2-3 Front Panel LED and Buttons ........................................................................ 18

2-4 Rear System LAN LEDs ................................................................................. 19

2-5 Power Supply Unit LED .................................................................................. 20

2-6 Hard Disk Drive LEDs .................................................................................... 21

Chapter 3 System Hardware Installation ......................................................................23

3-7 Removing Chassis Cover ............................................................................... 24

3-8 Removing and Installing the Fan Duct ........................................................... 25

3-9 Installing the CPU and Heat Sink ................................................................... 26

3-10 Installing the Memory ..................................................................................... 28

3-10-1 Six Channel Memory Conguration ........................................................................28

3-10-2 Installing a Memory ...............................................................................................29

3-10-3 DIMM Population Table ..........................................................................................29

3-10-4 Intel Optane DCPMM DIMM Population Rule ........................................................30

3-11 Installing the PCI Expansion Card ................................................................. 31

3-12 Installing the Hard Disk Drive ......................................................................... 32

3-13 Replacing the FAN Assemblly ........................................................................ 33

3-14 Replacing the Power Supply .......................................................................... 34

3-15 Replacing Power Distribution Board Cage ..................................................... 35

3-16 Cable Routing ................................................................................................ 36

Chapter 4 Motherboard Components ...........................................................................37

4-17 Motherboard Components ............................................................................. 37

4-18 Jumper Setting .............................................................................................. 38

Chapter 5 BIOS Setup ..................................................................................................39

5-1 The Main Menu .............................................................................................. 41

5-2 Advanced Menu ............................................................................................. 43

5-2-1 iSCSI Conguration ................................................................................................44

5-2-2 Intel(R) Virtual RAID on CPU .................................................................................45

5-2-3 Trusted Computing .................................................................................................46

- 8 -

5-2-4 Serial Port Console Redirection .............................................................................47

5-2-5 COM1/COM2 Serial Over LAN/Legacy/Serial Port for Out-of-Band EMS .................

Console Redirection Settings ...............................................................................................48

5-2-6 SIO Conguration ...................................................................................................51

5-2-7 PCI Subsystem Settings .........................................................................................54

5-2-8 Network Stack ........................................................................................................55

5-2-9 CSM Conguration .................................................................................................56

5-2-10 Post Report Conguration ......................................................................................58

5-2-11 NVMe Conguration ...............................................................................................59

5-2-12 USB Conguration ..................................................................................................60

5-2-13 Chipset Conguration .............................................................................................61

5-3 Chipset Setup Menu ....................................................................................... 62

5-3-1 Processor Conguration .........................................................................................63

5-3-2 Pre-Socket Conguration .......................................................................................65

5-3-3 Common RefCode Conguration ...........................................................................67

5-3-4 UPI Conguration ...................................................................................................68

5-3-5 Memory Conguration ............................................................................................70

5-3-6 Memory Topology ...................................................................................................72

5-3-7 Memory RAS Conguration ....................................................................................73

5-3-8 IIO Conguration ....................................................................................................74

5-3-9 Intel® VT for Directed I/O (VT-d) ...........................................................................75

5-3-10 Inter® VMD Technology .........................................................................................76

5-3-11 Advanced Power Management Conguration ........................................................77

5-3-12 CPU P State Control ...............................................................................................78

5-3-13 Hardware PM State Control ....................................................................................79

5-3-14 CPU C State Control ..............................................................................................80

5-3-15 Package C State Control ........................................................................................81

5-3-16 CPU-Advanced PM Tuning .....................................................................................82

5-3-17 PCH Conguration .................................................................................................84

5-3-18 PCH SATA Conguration ........................................................................................85

5-3-19 PCH sSATA Conguration ......................................................................................87

5-3-20 Miscellaneous Conguration ..................................................................................89

5-3-21 Server ME Conguration ........................................................................................90

5-3-22 Runtime Error Logging ...........................................................................................91

5-3-23 Whea Settings ........................................................................................................92

5-3-24 Memory Error Enabling ...........................................................................................93

5-3-25 PCIe Error Enabling ................................................................................................94

5-4 Server Management Menu ............................................................................. 95

5-4-1 System Event Log ..................................................................................................97

5-4-2 View FRU Information ............................................................................................98

5-4-3 BMC Network Conguration ...................................................................................99

5-4-4 IPv6 BMC Network Conguration .........................................................................100

- 9 -

5-5 Security Menu .............................................................................................. 101

5-5-1 Secure Boot .........................................................................................................102

5-5-2 Key Management ...............................................................................................103

5-6 Boot Menu .................................................................................................... 105

5-6-1 UEFI NETWORK Drive BBS Priorities ................................................................107

5-6-2 1UEFI Application Boot Priorities ............................................................... 108

5-7 Save & Exit Menu ......................................................................................... 109

5-8 BIOS POST Codes .......................................................................................111

5-8-1 AMI Standard - PEI ............................................................................................... 111

5-8-2 AMI Standard - DXE ............................................................................................. 111

5-8-3 AMI Standard - ERROR .......................................................................................113

5-8-4 Intel UPI POST Codes .......................................................................................... 114

5-8-5 Intel UPI Error Codes ...........................................................................................114

5-8-6 Intel MRC POST Codes .......................................................................................115

5-8-7 Intel MRC Error Codes .........................................................................................115

5-8-8 Intel PM POST Codes ..........................................................................................116

5-8-9 Intel PM POST Codes ..........................................................................................116

5-9 BIOS POST Beep code (AMI standard) ....................................................... 117

5-9-1 PEI Beep Codes ...................................................................................................117

5-9-2 DXE Beep Codes .................................................................................................117

5-10 BIOS Recovery Instruction ........................................................................... 118

- 10 -

This page intentionally left blank

- 11 - Hardware Installation

1-1 Installation Precautions

The motherboard/system contain numerous delicate electronic circuits and components which

can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully

read the service guide and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or oth er hardware

components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap, keep your hands dry and rst touch a metal object to eliminate static electricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

Hardware Installation - 12 -

1-2 ProductSpecications

Socket

Security

Security Serve rOperating Properties

Power S upply

CPU 2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors

Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon®

Silver Processor and Intel® Xeon® Bronze Processor

CPU TDP up to 165W

NOTE:

If only 1 CPU is installed, some PCIe or memory functions might be unavailable

This device does not support Intel Omni-Path function

Socket

Security

Security Serve rOperating Properties

Power S upply

Socket Per node:

2 x LGA 3647

Total:

8 x LGA 3647

Socket P

Socket

Security

Security Serve rOperating Properties

Power S upply

Chipset Intel® C621 Express Chipset

Socket

Security

Security Serve rOperating Properties

Power S upply

Memory Per node:

16 x DIMM slots

Total:

64 x DIMM slots

DDR4 memory supported only

6-channel memory architecture

RDIMM modules up to 64GB supported

LRDIMM modules up to 128GB supported

Supports Intel® Optane™ DC Persistent Memory (DCPMM)

1.2V modules: 2933/2666/2400/2133 MHz

Maximum veried DCPMM conguration:

Ambient temperature 35°C

2nd Generation Intel® Xeon® Scalable processor 165W (Max.)

DCPMM 256GB x2 pcs (Per Node)

DCPMM installation locations:

DIMM_P1_( G1, J1)

NOTE:

1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only

2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon®

Scalable Processors only

3. The maximum number of DCPMM that can be installed is based on a maximum

operating (ambient) temperature of 35°C

4. To enquire about installing a greater number of DCPMM, please consult with

your GIGABYTE technical or sales representative

NOTE:

Wereservetherighttomakeanychangestotheproductspecicationsandproduct-related

information without prior notice.

- 13 - Hardware Installation

Socket

Security

Security Serve rOperating Properties

Power S upply

LAN Per node:

1 x Dedicated management port

Total:

4 x Dedicated management ports

1 x 10/100/1000 *CMC global management port

*CMC: Chassis Management Controller, to monitor all status of computing nodes

* Please contact FAE if NCSI function of OCP mezzanine card is needed

Socket

Security

Security Serve rOperating Properties

Power S upply

Video Integrated in Aspeed® AST2500

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Management chip in CMC board:

Integrated in Aspeed® AST1250

Integrated in Aspeed® AST2520A2-GP

Socket

Security

Security Serve rOperating Properties

Power S upply

Storage Per node:

3 x 3.5" SATA/SAS hot-swappable HDD/SSD bays

Onboard SATA DOM support (PIN_7, PIN_8 or external cable)

Total:

12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays

2.5" HDD/SSD supported

SAS card is required for SAS devices support

Socket

Security

Security Serve rOperating Properties

Power S upply

RAID Intel® SATA RAID 0/1/5

Socket

Security

Security Serve rOperating Properties

Power S upply

Expansion Slot Per node:

1 x Half-length low-prole slot with PCIe x16 (Gen3 x16 bus)

1 x Half-length low-prole slot with PCIe x8 (Gen3 x8 bus)

1 x OCP mezzanine slot with PCIe Gen3 x16 bus

Total:

4 x Half-length low-prole slot with PCIe x16 (Gen3 x16 bus)

4 x Half-length low-prole slot with PCIe x8 (Gen3 x8 bus)

4 x OCP mezzanine slot with PCIe Gen3 x16 bus

Socket

Security

Security Serve rOperating Properties

Power S upply

Internal I/O Per node:

1 x COM header

1 x TPM header

1 x BMC SGPIO header

1 x JTAG BMC header

1 x PLD header

1 x Clear CMOS jumper

1 x IPMB connector

1 x Buzzer

Hardware Installation - 14 -

Socket

Security

Security Serve rOperating Properties

Power S upply

Front I/O Per node:

1 x Power button with LED

1 x ID button with LED

1 x Status LED

Total:

4 x Power button with LED

4 x ID button with LED

4 x Status LED

*1 x CMC status LED

*Only one CMC status LED per system

Socket

Security

Security Serve rOperating Properties

Power S upply

Rear Panel I/O Per node:

2 x USB 3.0

1 x VGA

1 x RJ45 MLAN

1 x ID LED

Total:

8 x USB 3.0

4 x VGA

4 x RJ45 MLAN

4 x ID LEDs

*1 x CMC global management port

*Only one CMC global management port per system

Socket

Security

Security Serve rOperating Properties

Power S upply

Backplane I/O 12 x ports

12Gb/s & 6Gb/s compatible

Socket

Security

Security Serve rOperating Properties

Power S upply

TPM 1 x TPM header with LPC interface

Optional TPM2.0 kit: CTM000

- 15 - Hardware Installation

Socket

Security

Security Serve rOperating Properties

Power S upply

Power Supply 2 x 2200W redundant PSUs

80 PLUS Platinum

AC Input:

100-127V~/ 14A, 47-63Hz

200-240V~/ 12.6A, 47-63Hz

DC Output:

Max 1200W/ 100-127V~

+12.12V/ 95.6A

+12Vsb/ 3.5A

- Max 2200W/ 200-240V

+12.12V/ 178.1A

+12Vsb/ 3.5A

NOTE:

The system power supply requires C19 type power cord

2000W 80 PLUS Titanium PSU as an option

Socket

Security

Security Serve rOperating Properties

Power S upply

System

Management

Aspeed® AST2500 management controller

Avocent® MergePoint IPMI 2.0 web interface:

Network settings

Network security settings

Hardware information

Users control

Services settings

IPMI settings

Sessions control

LDAP settings

Power control

Fan proles

Voltages, fans and temperatures monitoring

System event log

Events management (platform events, trap settings, email settings)

vKVM & vMedia (HTML5)

Socket

Security

Security Serve rOperating Properties

Power S upply

Operating

Properties

Operating temperature: 10°C to 35°C

Operating humidity: 8-80% (non-condensing)

Non-operating temperature: -40°C to 60°C

Non-operating humidity: 20%-95% (non-condensing)

Socket

Security

Security Serve rOperating Properties

Power S upply

System

Dimension

2U 4 Nodes - Rear access

440 x 87 x 820

Hardware Installation - 16 -

1-3 System Block Diagram

- 17 - System Appearance

Chapter 2 System Appearance

2-1 Front View

No. Decription

1. Front Panel LEDs and buttons

• Please Go to Chapter 2-3 Front Panel LED and Buttons for detail description of

function LEDs.

2-2 Rear View

No. Decription

1. Chassis management Console port

2. USB 3.0 ports

3. VGA port

4. 10/100/1000 Server management LAN port

Primary

PSU

Secondary

PSU

1

2 3 4

1 1

Node 1 Node 2 Node 3 Node 4

System Appearance - 18 -

2-3 Front Panel LED and Buttons

No. Name Color Status Description

1. System

Status LED

Green On System is operating normally.

Amber

On

Critical condition, may indicates:

System fan failure

System temperature

Blink

Non-critical condition, may indicates:

Redundant power module failure

Temperature and voltage issue

Chassis intrusion

N/A Off

Non-critical condition, may indicates:

Redundant power module failure

Temperature and voltage issue

Chassis intrusion

2. Power button

with LED

Green On System is powered on

Green Blink System is in ACPI S1 state (sleep mode)

N/A Off

• System is not powered on or in ACPI S5 state (power

off)

• System is in ACPI S4 state (hibernate mode)

3. ID Button

with LED

Blue On System identication is active.

N/A Off System identication is disabled.

4. Enclosure

Green On System is operating normally.

Amber

On

Critical condition, may indicates:Power

module failureSystem fan failurePower supply

voltage issueSystem temperature

Blink

Non-critical condition, may indicates:Redundant

power module failureTemperature and

voltage issueChassis intrusion

2

4

1

3

2

1

3

System Appearance - 19 -

2-4 Rear System LAN LEDs

No. Name Color Status Description

1. 10GbE

Speed LED

Yellow On 10Gbps data rate

Green On 1Gbps data rate

N/A Off 100 Mbps data rate

2.

10GbE

Link/

Activity LED

Green

On Link between system and

network or no access

Blink Data transmission or receiving is occurring

N/A Off No data transmission or receiving is occurring

1 2

System Appearance - 20 -

2-5 Power Supply Unit LED

PSU LED

State Description

OFF No AC power to all power supplies

0.5Hz Green Blinking AC present / only standby on / Cold redundant mode

2Hz Green Blinking Power supply rmware updateing mode

Amber

AC cord unplugged or AC power lost; with a second

power supply in parallel still with AC input power

Power supply critical event causing shut down:

failure, OCP, OVP, fan failure and UVP

0.5Hz Amber Blinking

Power supply warning events where the

power supply continues to operate:

high temp, high power, high current and slow fan

Page is loading ...

Gigabyte H261-H60 User manual

Gigabyte H261-H60 User manual

Related papers

Other documents