Service Manual
Wireless Traveler SE2
Service Manual Wireless Traveler SE2
Table of Contents
Chapter 1. Introduction.....................................................................................................................2
a. System Requirements...............................................................................................2
b. Support Windows.....................................................................................................2
Chapter 2. Troubleshooting...............................................................................................................3
Chapter3. Testing Procedures……………………………………………………………..4
a.Testing Flow Chart……………………………………………………………………4
b.Check Receiver LED………………………………………………………………….5
c.Check Mouse LED……………………………………..……………………………..6
d.Check Mouse Button………………………………..………………………………7
e.Check Cursor…………………………………………………………………………8
f.Check Connecting between PC and Mouse…………………………………………9
Chapter 4. Removal and Replacement............................................................................................10
Chapter 5. Parts list.........................................................................................................................12
Chapter 6. Tools..............................................................................................................................12
Version 1.0
P
age 1
Service Manual Wireless Traveler SE2
Chapter 1. Introduction
a. System Requirements
♦ IBM PC Pentium 233 compatible or higher
♦ Windows XP/Me/2003/2000/98,Mac OS 8.6 or higher
♦ Available PS2 orUSB port
b. Support Windows
♦ XP//Me/2003/2000/98SE, and Mac OS
Version 1.0
P
age 2
Service Manual Wireless Traveler SE2
Chapter 2.Troubleshooting
Item Condition Probable Reasons Solutions
1. Mouse can’t
work
1. Cursor can’t work 1. Receiver or mouse
failed
Change Receiver or
mouse upper PCBA
2. Button can’t
work
1.Press button no respond 1. Mouse upper PCBA Change mouse upper
PCBA
3. Cursor can’t
move smoothly
1. Cursor can’t move smoothly 1. Battery no power or
sensor failed
Change new battery or
mouse down PCBA
4. Receiver LED
Unlight
1.Cursor couldn’t work 1. LED fail 1Change Receiver
Version 1.0
P
age 3
Service Manual Wireless Traveler SE2
Chapter 3. Testing Procedures
a. Testing flow chart
T
T
T
T
Replace
b
attery or Mouse
down PCBA
Replace
Receiver
Replace battery
or Mouse down
PCBA
F
F
Check Mouse
buttons
Replace Mouse
down PCBA
T
Check
Connecting
b
etween PC with
Mouse
END
Replace Receiver or
Mouse upper PCBA
Check Cursor
Check Mouse
LED
Check Receiver
LED
START
F
F
F
Version 1.0
P
age 4
Service Manual Wireless Traveler SE2
b.Check receiver LED
If receiver LED is off the receiver can not function, please replace
receiver.
Receiver LED
Version 1.0
P
age 5
Service Manual Wireless Traveler SE2
c.Check Mouse LED
If the mouse LED is off the mouse will not function, please
replace new battery or mouse down PCBA.
Mouse LED
Mouse down
PCBA
Version 1.0
P
age
6
Service Manual Wireless Traveler SE2
d.Check mouse buttons
If the mouse buttons do not function, please replace mouse down PCBA.
Mouse down
PCBA
Version 1.0
P
age
7
Service Manual Wireless Traveler SE2
e.Check cursor
If cursor is unstable or does not move smoothly, please replace new battery.
If still does not work after replacing new battery please replace mouse
down PCBA.
Mouse down
PCBA
Version 1.0
P
age 8
Service Manual Wireless Traveler SE2
f.Check connecting between PC and mouse
If receiver LED and mouse LED are on and the mouse still can not
function, please replace receiver or replace mouse upper PCBA.
Mouse upper
PCBA
Version 1.0
P
age 9
Service Manual Wireless Traveler SE2
Chapter 4. Removal and Replacement
Step Description Picture
1. Turn over
mouse
To disassemble the mouse, you
have to turn over mouse.
2. Loose
screws
Using screwdriver to loose 1
screw after taking the battery
cover apart.
3. Take apart
PCBA
Take apart the upper cover and
then pick PCBA directly.
The PCBA is the most important
part of mouse.
Version 1.0
P
age 10
Service Manual Wireless Traveler SE2
4. Take the
down PCBA
and upper
PCBA with
hand
Upper PCBA
Down PCBA
Caution: The receiver’s covers can not be taken apart because the
receiver cover is not connected with screws but plastic welder,
if you repair receiver you have to only replace receiver.
Version 1.0
P
age 11
Service Manual Wireless Traveler SE2
Chapter 5. Part list
Item Parts number Description
Receiver Assembly
2 20000060100 Mouse upper PCBA
3 20000061100 Mouse down PCBA
Chapter 6. Tools
1. Screwdriver cross
Version 1.0
P
age 12
/
