2. Genius
  3. G-Shot G511

Genius G-Shot G511 User manual

  • Hello! I am an AI chatbot trained to assist you with the Genius G-Shot G511 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Service Manual
G-Shot G511
Version1.0
Service Manual G-Shot G511
Version 1.0
P
age 1
Table of Contents
1.Disassembly and Assembly…………………………………………………….2
2.No Power Testing Procedure……….……………..……………..……………….3
A. Check the battery……………………………………………………………………...4
B. Check USB Cable……………………..………………………………………………..5
C. Check Q3,U1,TP between L5 and D4,U4,J2………………………………………………..6
3.Image Is Blur or Can Not Capture Image Testing Procedure………11
A. Check the U11(CMOS Sensor)………………………………………..…………………13
B. Check the U13(SDRAM)……………………….………….……………………………20
C. Check the U14(Flash Memory)………………….…………………………………….29
D. Replace PCBA…………………………..…………………………………………35
4.Can Not Store Image Testing Procedure…………….……………....36
A.Check U13………………………………………………………………………………….37
B.Check U14………………………………………………….………………………….40
5.TFT LCD Can Not Display Testing Procedure………………………………46
A.Check TFT LCD………………………………………………..…………..…47
B. Check J16………………………………………………………………………………….48
C.Replace TFT LCD………….…………………………………………………60
6.Can Not Connect Computer Testing Procedure……………..……………....61
A. Check the USB Cable……………………………………………………………….……62
B. Check the U12(ROM FLASH)……………………………………………………………63
C. Check the Y1………………………………………………………………………………66
7.No Flash Testing Procedure……………………………………………..………....67
A. Replace Flash Module…………………………………………………………….……68
8. Part List……………………………………………………….……………………………..69
9.Tooling……………………………………………….…………..…………………………..70
Service Manual G-Shot G511
Version 1.0
P
age 2
1. Disassembly and Assembly
See the video DVD.
Service Manual G-Shot G511
Version 1.0
P
age 3
2. No Power Testing Procedure
A. Please check voltage of battery with
multimeter.
If the voltage is different, please replace
battery.
Test Ok
B. Please check USB cable with multimeter
or with a new one.
If the USB is broken, please replace a new
one.
C. Please check voltage of Q3,U1,test point
between L5 and D4,U4 ,J2 with
oscilloscope.
If the voltage or waveform is different,
please replace relevant parts.
Service Manual G-Shot G511
Version 1.0
P
age 4
A. Check if voltage of battery with multimeter is shown as below.
If not, please replace a new battery.
Service Manual G-Shot G511
Version 1.0
P
age 5
B.Check if USB cable is broken or short with multimeter or a new USB
cable.
If USB cable is broken or short, please replace a new one.
Service Manual G-Shot G511
Version 1.0
P
age
6
C.Check if voltage of pin 3 on Q3 with oscilloscope is shown as below.
If not,please replace the Q3.
Service Manual G-Shot G511
Version 1.0
P
age
7
C-1.Check if voltage of pin 3 on U1 with oscilloscope is shown as below.
If not,please replace the U1.
Service Manual G-Shot G511
Version 1.0
P
age 8
C-2. Check if voltage of testing point between L5 and D4 with
oscilloscope is shown as below.
If not,please replace L5.
Service Manual G-Shot G511
Version 1.0
P
age 9
C-3. Check if voltage of pin 6 on U4 with oscilloscope is shown as below.
If not,please replace the U4.
Service Manual G-Shot G511
Version 1.0
P
age 10
C-4. Check if voltage of pin 1 on J2 with oscilloscope is shown as below.
If not,please replace the J2.
Service Manual G-Shot G511
Version 1.0
P
age 11
3. Image Is Blur or Can Not Capture Image Testing Procedure
A.Please check the wave of pins on
U11(CMOS Sensor) with oscilloscope by
power supply .
If the wave is different, please replace U11.
B. Please check the wave of pins on
U13(SDRAM) with oscilloscope by power
supply.
If the wave is different, please replace
U13.
C. Please check the wave of pins on
U14(Flash Memory) with oscilloscope by
power supply.
If the wave is different, please replace U14.
D. If the image is still blur or can not capture
the image after check the wave of pins on
U11,U13 and U14 with oscilloscope by
power supply.Please try to replace PCBA.
Service Manual G-Shot G511
Version 1.0
P
age 12
Test Ok
Service Manual G-Shot G511
Version 1.0
P
age 13
A.Check the wave of pin46 on U11(CMOS Sensor) with oscilloscope is
shown as below by power supply.
If the wave is different, please replace U11.
Service Manual G-Shot G511
Version 1.0
P
age 14
A-1. Check the wave of pin45 on U11(CMOS Sensor) with oscilloscope
is shown as below by power supply.
If the wave is different, please replace U11.
Service Manual G-Shot G511
Version 1.0
P
age 15
A-2. Check the wave of pin31 on U11(CMOS Sensor) with oscilloscope
is shown as below by power supply.
If the wave is different, please replace U11.
Service Manual G-Shot G511
Version 1.0
P
age 1
6
A-3. Check the wave of pin41 on U11(CMOS Sensor) with oscilloscope
is shown as below by power supply.
If the wave is different, please replace U11.
Service Manual G-Shot G511
Version 1.0
P
age 1
7
A-4. Check the wave of pin40 on U11(CMOS Sensor) with oscilloscope
is shown as below by power supply.
If the wave is different, please replace U11.
Service Manual G-Shot G511
Version 1.0
P
age 18
A-5. Check the wave of pin29 on U11(CMOS Sensor) with oscilloscope
is shown as below by power supply.
If the wave is different, please replace U11.
Service Manual G-Shot G511
Version 1.0
P
age 19
A-6. Check the wave of pin24~pin28,pin32~36 on U11(CMOS Sensor)
with oscilloscope is shown as below by power supply.
If the wave is different, please replace U11.
/