Millenium star TSP100 Installation guide

i

Star TSP100 Receipt Printer

Installation Guide

Version 1.2

Copyright Information

ii

Every effort has been made to ensure that the information in this guide is accurate. Millennium Systems

International assumes no responsibility or liability for any errors or inaccuracies with the informational content in

this guide. Millennium Systems International and third-party publishers release updates frequently so the images

shown in this user guide may be slightly different from what you see in your version of the software.

Other company and product names mentioned herein may be trademarks of their respective companies. Mention

of third-party products is for informational purposes only and constitutes neither an endorsement nor a

recommendation. Millennium Systems International assumes no responsibility with regard to the performance or

use of these products. All understandings, agreements, or warranties, if any, take place directly between the

vendors and the prospective users.

The example companies, organizations, products, domain names, email addresses, logos, people, places, and

events depicted herein are fictitious. No association with any real company, organization, product, domain name,

email address, logo, person, place, or event is intended or should be inferred.

Millennium Systems International is not responsible for the content of external Internet sites referenced in

this guide.

Using This Guide

3

This guide explains how to install the Star TSP100 receipt printer for use with Millennium.

4

Contents

Overview ....................................................................................................................................................... 1

Step 1 - Basic Installation & Configuration ................................................................................................... 2

1.1

- Change Windows Settings................................................................................................................. 2

1.2

- Install the Receipt Printer Software ................................................................................................ 14

1.3

- Configure the Receipt Printer Software .......................................................................................... 30

1.4

- Configure Millennium ..................................................................................................................... 32

Step 2 - Advanced Configuration ................................................................................................................ 35

2.1

- Customize Receipts ......................................................................................................................... 35

2.2

- Connect a Cash Drawer ................................................................................................................... 38

Step 3 - Terminal Services Configuration .................................................................................................... 41

3.1

- Configure Server Connection Settings ............................................................................................ 41

3.2

- Configure Remote Desktop Connection ......................................................................................... 45

Troubleshooting Guide ............................................................................................................................... 47

1

Overview

Note: You must assemble the receipt printer using the manufacturer's instructions before starting the

installation.

Complete the following steps to install the Star TSP100 receipt printer.

Step 1 - Basic Installation & Configuration

The first step is to install and configure the receipt printer to work with Millennium.

1.1

- Change Windows Settings

1.2

- Install the Receipt Printer Software

1.3

- Configure the Receipt Printer Software

1.4

- Configure Millennium

Step 2 - Advanced Configuration

The second step is to customize the appearance of your receipts and/or connect a non-intelligent cash

drawer to the receipt printer.

2.1

- Customize Receipts

2.2

- Connect a Cash Drawer

Step 3 - Terminal Services Configuration

The final step is only applicable if you operate Millennium in a Remote Desktop Services/Terminal

Services environment.

3.1

- Configure Server Connection Settings

3.2

- Configure Remote Desktop Connection

2

Step 1 - Basic Installation & Configuration

1.1 - Change Windows Settings

The first step is to change settings in Windows.

Note: If you are installing the receipt printer on a Mac, you need to complete this step in the Windows

operating system.

Windows XP

Important: You do not need to change any settings in Windows XP. Refer to page 14 to proceed with

the next step of the installation.

Windows Vista

1.

Access Windows with an administrator account.

2.

Press Windows Logo+R or select Start > All Programs > Accessories > Run.

The Run window displays.

3.

Type "sysdm.cpl" and press Enter.

The System Properties window displays.

4.

Click the Advanced tab.

5.

Click Settings in the Performance section.

The Performance Options window displays.

6.

Click the Data Execution Prevention tab.

3

Step 1 - Basic Installation & Configuration

7.

Select Turn on DEP for essential Windows programs and services only.

8.

Click OK until the System Properties window closes.

9.

Right-click on the Windows desktop and select Personalize.

The Personalization screen displays.

10.

Type "uac" in the Search field.

A list of search results displays.

11.

Click Turn User Account Control (UAC) on or off.

The Turn User Account Control On or Off screen displays.

12.

Deselect Use User Account Control (UAC) to help protect your computer.

13.

Click OK.

14.

Click Restart Now.

15.

Refer to page 14 to proceed with the next step of the installation.

4

Step 1 - Basic Installation & Configuration

Windows 7

1.

Access Windows with an administrator account.

2.

Click Start, type "sysdm.cpl", and press Enter.

The System Properties window displays.

3.

Click the Advanced tab.

4.

Click Settings in the Performance section.

The Performance Options window displays.

5.

Click the Data Execution Prevention tab.

6.

Select Turn on DEP for essential Windows programs and services only.

7.

Click OK until the System Properties window closes.

5

Step 1 - Basic Installation & Configuration

8.

Click Start, type "uac", and press Enter.

The User Account Control Settings window displays.

9.

Move the slider to Never notify.

10.

Click OK.

11.

Restart the computer.

12.

Refer to page 14 to proceed with the next step of the installation.

6

Step 1 - Basic Installation & Configuration

Windows 8

1.

Access Windows with an administrator account.

2.

On the Start screen, type "sysdm.cpl" and press Enter.

The System Properties window displays.

3.

Click the Advanced tab.

4.

Click Settings in the Performance section.

The Performance Options window displays.

5.

Click the Data Execution Prevention tab.

7

Step 1 - Basic Installation & Configuration

6.

Select Turn on DEP for essential Windows programs and services only.

7.

Click OK until the System Properties window closes.

8.

On the Start screen, type "uac" and click Settings.

9.

Click Change User Account Control settings.

The User Account Control Settings window displays.

8

Step 1 - Basic Installation & Configuration

10.

Move the slider to Never notify.

11.

Click OK.

12.

On the Start screen, type "cmd".

9

Step 1 - Basic Installation & Configuration

13.

Right-click on the Command Prompt app and select Run as administrator.

The Command Prompt displays.

14.

Type "net user administrator /active:yes" and press Enter.

Step 1 - Basic Installation & Configuration

10

15.

On the Start screen, type "control panel" and press Enter.

The Control Panel displays.

16.

Click User Accounts.

17.

Click Manage another account.

18.

Click the Administrator account.

19.

Click Change the password.

20.

Type a password to use for the Administrator account.

21.

Click Change password.

22.

Restart the computer.

23.

Refer to page 14 to proceed with the next step of the installation.

Step 1 - Basic Installation & Configuration

11

Windows 8 Pro/Enterprise

1.

Access Windows with an administrator account.

2.

On the Start screen, type "sysdm.cpl" and press Enter.

The System Properties window displays.

3.

Click the Advanced tab.

4.

Click Settings in the Performance section.

The Performance Options window displays.

5.

Click the Data Execution Prevention tab.

Step 1 - Basic Installation & Configuration

12

6.

Select Turn on DEP for essential Windows programs and services only.

7.

Click OK until the System Properties window closes.

8.

On the Start screen, type "secpol.msc" and press Enter.

The Local Security Policy window displays.

9.

Double-click Local Policies and double-click Security Options.

Step 1 - Basic Installation & Configuration

13

10.

Scroll down to the end of the list and double-click the User Account Control: Run all administrators

in Admin Approval Mode policy.

The User Account Control window displays.

11.

Select Disabled.

12.

Click OK.

13.

Restart the computer.

14.

Refer to page 14 to proceed with the next step of the installation.

Step 1 - Basic Installation & Configuration

14

1.2 - Install the Receipt Printer Software

The next step is to install the receipt printer software.

Note: You must install the receipt printer software on the computer where you intend to use the

receipt printer. If you are installing the receipt printer on a Mac, you must complete the installation in

the Windows operating system.

PC

32-bit Operating System

1.

Complete one of the following:

 If you are not using the basic edition of Windows 8, access Windows with an administrator account.

 If you are using the basic edition of Windows 8, access Windows with the Administrator account.

2.

Connect the receipt printer to a USB port on the computer.

Important:

 You must connect the receipt printer to a USB port on the computer and not a USB hub connected to

the computer.

 Do not connect the receipt printer to an AC outlet before you install the receipt printer software.

3.

Insert the installation CD.

The Installation screen displays.

4.

Click Windows 32 bit OS.

The installation wizard displays.

5.

Click Next.

The Customer Information screen displays.

6.

Type your details and click Next.

The Setup Type screen displays.

7.

Select Typical and click Next.

The Ready to Install the Program screen displays.

Step 1 - Basic Installation & Configuration

15

8.

Click Install.

Tip: Click Install this driver software anyway if the Windows Security window displays.

The InstallShield Wizard Completed screen displays once the installation finishes.

9.

Click Finish.

10.

Select one of the following options:

 If you are using Windows 7 or Windows 8, proceed to Step 11.

 If you are not using Windows 7 or Windows 8, proceed to Step 13.

11.

Move back to the Installation screen that displayed when you inserted the installation CD and click

Windows 7 32 bit PATCH.

The Command window displays and the patch file installs. The "Press any key to continue" message displays

once the installation finishes.

12.

Press Enter.

13.

Restart the computer.

14.

Connect the receipt printer to an AC outlet and press the Power switch on the side of the

receipt printer.

15.

Refer to page 30 to proceed with the next step of the installation.

Step 1 - Basic Installation & Configuration

16

64-bit Operating System

1.

Complete one of the following:

 If you are not using the basic edition of Windows 8, access Windows with an administrator account.

 If you are using the basic edition of Windows 8, access Windows with the Administrator account.

2.

Connect the receipt printer to a USB port on the computer.

Important:

 You must connect the receipt printer to a USB port on the computer and not a USB hub connected to

the computer.

 Do not connect the receipt printer to an AC outlet before you install the receipt printer software.

3.

Open a web browser and access the following site:

http://downloads.millenniumsi.com/installsets/tsp100/Setup_for_WinXP_Vista_7_x64_ver55.exe

4.

Download and run the file.

The installation wizard displays.

5.

Click Next.

The Customer Information screen displays.

6.

Type your details and click Next.

The Setup Type screen displays.

7.

Select Typical and click Next.

The Ready to Install the Program screen displays.

8.

Click Install.

Tip: Click Install this driver software anyway if the Windows Security window displays.

The InstallShield Wizard Completed screen displays once the installation finishes.

9.

Click Finish.

10.

Restart the computer.

11.

Connect the receipt printer to an AC outlet and press the Power switch on the side of the

receipt printer.

12.

Refer to page 30 to proceed with the next step of the installation.

変更されたフィールドコード

Page is loading ...

Millenium star TSP100 Installation guide

Millenium star TSP100 Installation guide

Other documents