No. Picture Description Qty
A
BasketTop with Iron Chain 1
B
Basket Middle -left 1
C
Basket Middle-right 1
D
Base 1
F
Backrest Cushion 1
G
Seat Cushion 1
H
Screw M 8*25 15
I
Nut 15
J
Allen Key 1
K
Spanner 1
Assembly Instructions
Caution : You must read this before you proceed.
CHAIR-BASKET
CAUTION : This Chair Basket is NOT a TOY.
Keep your child / children at bay during the assembly process.
1 OF 4
I
Iron Stand (Separate Package) 1
Step 1
Unpack and place all parts on a clean, soft surface.
Please connect Basket(C) Middle-right Parts with Base(D) by using Screw(H) and Nut(I). then
Basket(B) Middle-left Parts with Base(D) by using Screw(H) and Nut(I)
Do not overtighten.
Step 2
Chair Basket intended for use with Iron Stand
Before Beginning Assembly:
2 OF 4
Step 5
Place Backrest Cushion(F) and Seat Cushion(G) into the basket.
Step 6
Lift the chair basket and hook up to Iron Chain(A) to the Iron Stand(I) as shown above.
Note: This step should be completed with 2 adults
Step 7
Adjust the Chain link to your preferred Seat Height.
Your Hanging Chair-Basket is ready for use.
Step 3
After finished above step 2, please connect Basket Middle (B)and (C), using the screw and nut, same
as step 2 Spanner fix the Nut while fasten screw by Allen Key.
Do not overtighten.
Step 4
On completion of Step 3, proceed to connect Baskettop.
Use the same screw and nut used in Step 2 above, this Step 4 assembly.
All the screw must be tighten now.
3 OF 4
4 OF 4
-
1
-
2
-
3
-
4
