STEP 1
3.1 Attach Panel (D) to Panel (C) with Screw (2).
3.2 Attach Panel (B) to the assembled unit with Screw (2), as shown.
STEP 3
STEP 3.1
STEP 3.2
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
A 1pc
Top Panel
No QtyParts List
B
C
1pc
1pc
Right Side Panel
D 2pcs
Center Bar
Left Side Panel
1
2
3
4pcs
8pcs
4pcs
Mini Fix Cam
No Hardware List Qty
Dowel
Screw
4 4pcs
Mini Fix Bolt
5 4pcs
Nail Leg
Insert Mini Fix Bolt (4) into the pre-drilled
holes on Panel (A).
STEP 2
2.1 Install Dowel (1) and Nail Leg (5) into
Panel (B) & (C), as shown:
2.2 Install Mini Fix Cam (3) into the pre-drilled
holes on Panel (B) & (C).
Note: Arrow on Mini Fix
Cam should be pointing
outward.