Congratulations on your new product!

This guide will show you how to quickly set up your system for local and remote surveillance. For comprehensive instructions,

full manuals, and how-to videos, please visit our knowledge base (kb.zmodo.com) and our support website

(www.zmodo.com/support).

Connecting your system

For the following instructions, please refer to the diagram below:

1. Connect your IP cameras directly to the NVR system with the provided cables.

2. Connect your display to the VGA or HDMI (may not apply) input the system (display cable not provided).

please wait 3-5 minutes for your system to automatically add the cameras. You will see live video as well as a quick

startup window. When the startup window appears, follow the on-screen instructions to set up NVR features including

language, time, and email address and password settings.

Note: The password function is disabled by default. To ensure your privacy, we STRONGLY suggest that you set up a password

immediately. Create a password with a combination of uppercase and lowercase letters and numbers. Choose something that

others are unlikely to guess.

If you are having difficulty, please visit the troubleshooting section of this guide or refer to the support links.

Setting up your NVR

You are now ready to set up remote viewing for surveillance from any location. Before proceeding, you will need a mobile device

with iOS v.6.0 (and up) and a valid iTunes account, or Android v.2.3 (and up).

Log in to your Zmodo account and tap the [+] Add Device icon on the upper-right corner of the Home Screen.

Select the “Wireless Device and Smart Kits” connection method and follow the on-screen instructions. The app will

automatically search for NVRs that are connected to the same network as your mobile device. Add your NVR and

press “Finish” when prompted. You will not need to configure any wireless cameras.

Your NVR may be recognizing other cameras on your network.

Please manually delete all cameras by going to the ‘Add Device’

menu from your NVR’s interface. Select the “Search and Add

All Devices Automatically” option, and wait 3-5 minutes for the

NVR to add the cameras.

Follow the steps below to troubleshoot common issues: