QOLSYS QS-2100-P01 Quick start guide

QOLSYS
Brand
QOLSYS
Model
QS-2100-P01
Type
Quick start guide

QOLSYS QS-2100-P01 is an IQ Smart Socket that allows you to control lamps, electronics, appliances, and anything else you can plug into an outlet, remotely via your IQ Panel. Once paired with your IQ Panel (pairing is recommended near the panel for convenience, but the smart socket can be moved up to 100 feet away once paired), you can customize names and settings and control your smart socket through the easy-to-use interface. The smart socket has a maximum current of 15A or 1800W. For any questions, please contact [email protected].

QOLSYS QS-2100-P01 is an IQ Smart Socket that allows you to control lamps, electronics, appliances, and anything else you can plug into an outlet, remotely via your IQ Panel. Once paired with your IQ Panel (pairing is recommended near the panel for convenience, but the smart socket can be moved up to 100 feet away once paired), you can customize names and settings and control your smart socket through the easy-to-use interface. The smart socket has a maximum current of 15A or 1800W. For any questions, please contact [email protected].

STEP
3
STEP
1
IQ SMART SOCKET QUICK INSTALL GUIDE
LOCATE
OUTLET
NEAR PANEL
PLUG
INTO
OUTLET
PAIR
WITH
PANEL
✓
PLUG IN
SMART
SOCKET
PLEASE NOTE:
PAIRING THE IQ SMART
SOCKET NEAR THE IQ PANEL IS
FOR CONVENIENCE ONLY.
ONCE IQ SMART SOCKET HAS
BEEN SUCCESSFULLY PAIRED
IT CAN BE MOVED ANYWHERE
WITHIN ACCEPTABLE RANGE
(APPROX 100 FEET OPEN AIR)
STEP
2
STEP
4
STEP
6
STEP
7
GOT QUESTIONS?
CONTACT TECH SUPPORT
TechSupport@Qolsys.com
Document#: IQSS-QG-03-17
Revision#: 03222017
Issue Date: MAR 2017
Qolsys Part #: QS-2100-P01
Firmware : 2016_08_26_9D7C
SUPPORT
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
Max current 15A or 1800W
APPLIANCES
ELECTRONICS
DECIDE
WHAT TO
CONTROL
LAMPS
LOCATE
DESIRED
OUTLET
PLUG
DEVICE
IN
STEP
8
ANYTHING
SECURE
INTO
PLACE
Press button on bottom
to “tamper” the device
Customize name and settings
as desired and and touch “ADD”
ADD
Place your panel in
“autolearn" mode
STEP
5
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
FCC ID: 2AAJXQS2100
IC: 11205-QS2100
  • Page 1 1

QOLSYS QS-2100-P01 Quick start guide

QOLSYS
Brand
QOLSYS
Model
QS-2100-P01
Type
Quick start guide

QOLSYS QS-2100-P01 is an IQ Smart Socket that allows you to control lamps, electronics, appliances, and anything else you can plug into an outlet, remotely via your IQ Panel. Once paired with your IQ Panel (pairing is recommended near the panel for convenience, but the smart socket can be moved up to 100 feet away once paired), you can customize names and settings and control your smart socket through the easy-to-use interface. The smart socket has a maximum current of 15A or 1800W. For any questions, please contact [email protected].

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents