Whirlpool ARC 7636 Program Chart

Type
Program Chart

This manual is also suitable for

Whirlpool ARC 7636 is a cutting-edge refrigerator-freezer that employs the advanced No-Frost system to prevent ice buildup and maintain even temperature distribution, ensuring optimal food preservation. Its antibacterial filter purifies the air, enhancing hygiene and extending the freshness of stored items. The appliance offers flexible temperature adjustment in both the refrigerator and freezer compartments, allowing you to customize storage conditions for various food types.

Whirlpool ARC 7636 is a cutting-edge refrigerator-freezer that employs the advanced No-Frost system to prevent ice buildup and maintain even temperature distribution, ensuring optimal food preservation. Its antibacterial filter purifies the air, enhancing hygiene and extending the freshness of stored items. The appliance offers flexible temperature adjustment in both the refrigerator and freezer compartments, allowing you to customize storage conditions for various food types.

PRODUCT SHEET
GB
Your new fridge-freezer utilises the cold ventilation
No-Frost
system and is intended exclusively for domestic use.
Introduced in the Whirlpool fridge-freezers, the Total-no-frost
system circulates cold air around the stored food, reduces
humidity and prevents ice build-up, completely eliminating the
necessity of the compartments defrosting. Frozen products do
not stick together, the labels remain legible, and the food storage
space stays clean. The forced airflow No-Frost system assures
even temperature distribution inside the compartments and
helps to keep the food fresh longer.
A. Refrigerator Compartment
1.
Shelves / Shelf area
1a.
Plastic "Dual" bottle holder (depending on model)
2.
Cooling compartment (depending on model)
3.
Crisper drawers
4.
Door trays
5.
Removable shelf with a bottle holder
6.
Bottle rack
7.
Rating plate
8.
Antibacterial filter (depending on model)
9.
Air control (depending on model)
B. Freezer Compartment
10.
Upper basket (area for freezing)
11.
Storage basket for frozen food items
12.
Ice tray
13.
Freezer compartment door
14.
The freezer door trays for pizza or other frozen products
with a short storage time (depending on the model)
C. Light switch off button
D) Internal controls
Important:
The number of shelves
and configuration of accessories may
vary, depending on model. All shelves and door trays are
removable.
The appliance accessories are not suitable for washing in
a dishwasher
.
The internal temperatures of the appliance
depend on the
ambient temperature, frequency of opening the doors, as well
as location of the appliance. Adjust the thermostat knob
depending on these factors.
The anti-bacterial filter
ensures a higher level of hygiene in the
refrigerator by continuously purifying the air of bacteria. Remove
it from the box found in the crisper drawer (item 3) and insert
into the grid (item 8).
Replace the filter every 6 months.
1.
Remove the filter together with the grille and dispose as a
whole.
2.
Replace the filter and the grille with the new ones.
3.
The replacement procedure is attached with the filter.
Our After-sales Service can supply this type of filter.
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
Starting the appliance up
Insert the plug into the mains socket.
The appliance will switch on automatically unless knob
(2)
is set
to position
OFF
.
The inside light switches on when both doors are opened.
After plugging the subsequent controls are activated:
The lamps on the control panels light up for 2 seconds.
It takes the refrigerator about 2 to 3 hours to reach the normal
operation temperature after turning on.
NOTE:
Food products put inside the appliance before it achieved its
set operating temperature may spoil.
Recommended thermostat position is MED/3-4.
USING THE COOLING COMPARTMENT
(depending on model)
The appliance is equipped with a cooling compartment for
storage of fresh food.
To adjust temperature, if necessary, rotate the air regulator (4):
Towards position (+) for cooler temperatures
Towards position (-) for less cool temperatures.
It is possible to remove the basket of the cooling
compartment.
USING THE FREEZER COMPARTMENT
The freezer compartment starts operation as soon as the
appliance is plugged into the power outlet socket.
Attention:
There is no need to adjust the thermostat knob as the temperature
is factory set to ensure the correct storage temperature for frozen
foods in the freezer compartment at ambient temperatures
between +20°C and +25°C.
After switching on, the freezer compartment takes
approximately 3 hours to reach a suitable temperature for
frozen food storage.
****
****
To adjust the internal
temperature, if
necessary:
Turn the thermostat
control knob (2):
- Towards position
MIN/1
, if the
temperature inside the
compartment is too cold
- Towards position
MAX/7
for colder
temperatures
- To position
OFF
to
switch the appliance off.
USING THE REFRIGERATOR COMPARTMENT
Recommended thermostat setting: MED/2.
Freezing fresh food
1.
24 hours before freezing of fresh food, set the knob (1) to
position : When turning from
Max/3
to , the knob is
slightly stiff and the
yellow indicator (3)
for symbol lights
up.
2.
Place food in the drawer, leaving enough space for air to
circulate around packs.
3.
For more efficient freezing, turn the knob
(2)
to position
Max/3
, and leave the fast freeze function activated for the
next 24 hours
4.
When freezing is complete, turn the knob (1) back to the
previously selected position.
CONTROL PANEL DESCRIPTION:
On/Off buttons
1.
Alarm resetting button.
2.
Alarm indicator lamp
3.
Function selection button.
4.
Party Mode function indicator lamp.
5.
Fast Cooling function indicator lamp.
6.
Anti-bacterial filter replacement indicator lamp.
7.
Anti-bacterial filter alarm resetting button.
FUNCTION DESCRIPTION
Functions and settings
REPLACING THE LIGHT BULB
Before replacing any light bulbs, be absolutely sure to
disconnect the appliance from power supply by removing
its plug from the socket.
How to proceed:
Remove the light cover or holder.
Remove the bulb pulling it out of the holder (do not rotate).
Check the bulb and replace (if necessary) by pushing its
terminals into the holder sockets until it stops.
Replace the light cover or holder.
The appliance is equipped with a special push-in light bulb These
bulbs are available only from our After-sales Service. The bulb
should not exceed
15W
Do not leave uncovered light bulbs.
Cleaning and Maintenance
While cleaning, especially after removing the light cover,
take special precautions and never touch the light bulb.
Other abnormal appliance operations
In case of abnormal appliance operation, a red alarm light will flash
and a beep will sound.
After pressing and holding the alarm deactivation "
RESET
" button,
the beep will stop and the indicator lamps (Party Mode, Fast
Cooling, Antibacterial Filter) will light up, allowing the user to
determine the alarm code (in accordance with the following table
listing possible alarm codes).
When several alarms occur simultaneously, the alarm with the
highest priority is displayed (the highest priority is alarm code
01
).
When the “RESET” button is released, the red indicator lamp will
flash until the fault is eliminated.
If the sensor failure alarm is displayed (alarm code 01), the Party
Mode function is available until the fault is rectified. If the
potentiometer failure alarm is displayed (alarm code 02), the
Party Mode and Fast Cooling functions are available:
After determining the alarm code(from 01 to 03), the user:·
can eliminate the reason of the code 03 alarm unaided by
closing the door.·
The other alarms (codes 01, 02) require contacting the
service and providing the alarm code.
To adjust the internal
temperature (if necessary):
Turn the thermostat control
knob (1):
- Towards position
MIN/1
for less cold internal
temperatures
- Towards position
MAX/3
for colder
temperatures
- To position , to use the
fast freeze function.
Alarm resetting (deactivation)
Party Mode
: Activate this function before cooling
products in the freezer compartment. To activate this
function, press button
Party Mode/Fast Cooling
– 1
green LED lights up on the panel. After 30 minutes, the
LED will flash and a beep is heard. To reset the alarm press
button
Party Mode/Fast Cooling
- the green LED goes
off.
12 3 4567
Fast cooling
: Activate this function before cooling fresh
products in the refrigerator compartment. To activate this
function, press and hold for 3 seconds the Party Mode/Fast
Cooling button – green LED 2 lights up on the panel. This
function turns off automatically after 6 hours. To deactivate
this function earlier, press and hold for 3 seconds the
Party
Mode/Fast Cooling
button - green LED 2 goes off.
Anti-Bacterial filter
- The antibacterial filter assures
maintaining a higher level of hygiene in the refrigerator by
continuously purifying the circulating air of bacteria. When it is
necessary to replace the filter, a yellow LED (6) lights up. After
replacing the filter, press and hold for 3 seconds the Reset filter
button (7) to deactivate the alarm.
Alarm types Alarm
codes
Indicator lamp on
Party
Mode
Fast
Cooling
Antibacterial
Filter
Air sensor failure 01 No No Yes
Potentiometer failure 02 No Yes No
Open door alarm 03 Yes No No
5019 637 01020
  • Page 1 1
  • Page 2 2

Whirlpool ARC 7636 Program Chart

Type
Program Chart
This manual is also suitable for

Whirlpool ARC 7636 is a cutting-edge refrigerator-freezer that employs the advanced No-Frost system to prevent ice buildup and maintain even temperature distribution, ensuring optimal food preservation. Its antibacterial filter purifies the air, enhancing hygiene and extending the freshness of stored items. The appliance offers flexible temperature adjustment in both the refrigerator and freezer compartments, allowing you to customize storage conditions for various food types.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI