Whirlpool ARC 5603 Program Chart

ARC 5603
Whirlpool
Brand
Whirlpool
Model
ARC 5603
Type
Program Chart

This manual is also suitable for

PRODUCT SHEET
GB
5019 637 01011
A. Refrigerator Compartment
1.
Lighting
2.
Fan with antibacterial filter (depending on the model)
3.
Shelves / Shelf area
3a.
Depending on the model
- wire grid shelf with “Smart shelf” containers
- plastic bottle shelf "Dual"
4.
Cooler compartment (depending on the model)
5.
Rating plate
6.
Crisper drawer/drawers
7.
Separator
8.
Removable bottle holder
9.
Door trays
B. Freezer Compartment
10.
Upper basket (freezing zone)
11.
Ice tray
12.
Storage basket for frozen food items
13.
The freezer door trays for pizza or other frozen products
with a short storage time (depending on the model)
C. Control panel and LCD display
Note:
•
The internal temperatures of the appliance
depend on
the ambient temperature, frequency of opening the doors,
as well as location of the appliance. Adjust the thermostat
knob depending on these factors.
•
The number and type of shelves,
as well as configuration
of accessories may vary, depending on model. All shelves
and door trays are removable.
•
The appliance accessories
are not suitable for washing in
a dishwasher.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, the
refrigerator
compartment
starts operation automatically. Particular
control elements are activated:
•
The indicator lamps on the control panels light up for 2
seconds.
•
The alarm becomes activated for 1 second.
The
refrigerator compartment
will turn on after the knob
is moved from position OFF to any other selected position,
from 1 to 7.
Note:
•
If food is placed in the refrigerator before the appliance has
cooled completely, it may deteriorate.
OPERATION DESCRIPTION
Temperature Adjustment:
The temperature in the refrigerator compartment
may
be set by turning the knob on the control panel.
- To set a lower temperature, turn the knob to position 7.
- To set a higher temperature, turn the knob to position 1.
- Knob set to position OFF - refrigerator deactivated.
Recommended thermostat knob position is 3-4.
To adjust the temperature in the freezer compartment,
use the temperature selection function.
•
Each consecutive pressing of the button sets temperature:
- Minimum
- Medium
- Maximum
One of the green indicator lights, as appropriate, lights up on
the control panel (under the asterisks).
•
The temperature of the freezer is factory set to position
(medium). The middle indicator light under the asterisks on
the control panel is on.
•
When the appliance is disconnected from power supply and
then re-connected, the freezer remembers the previously
set temperature.
CONTROL PANEL DESCRIPTION
On/Off buttons
1.
Alarm deactivating button: “
RESET
”.
2.
Yellow indicator light informing of an alarm: “
Black Out
”
power failure.
3.
Temperature selection button “
-/+
”.
4.
Green lamps indicating the “
Freezer Temperature
”.
5.
“
Fast Freezing
” button.
6.
Knob for turning the refrigerator turn on and setting the
temperature.
Fan with a button
The fan helps to achieve better temperature distribution
inside the refrigerator compartment, and optimizes food
storage conditions.
Press button (2b) to turn the fan on when the ambient
temperature is above 27, 28°C, when condensation occurs on
the shelves, and in the instances of high air humidity.
Note:
Do not obstruct the air intake area (2a) with food items.
The fan ONLY runs if the compressor is working.
Make sure to turn the fan off in lower ambient
temperatures.
The
anti-bacterial filter
ensures a higher level of hygiene in
your refrigerator through continuous purifying of circulating
air from bacteria. Remove it from the box (found in the
crisper drawer (item 6) and insert into the grille (item 2c).
Replace the filter every 6 months.
1.
Remove the filter together with the grille and dispose as a
whole.
2.
Replace the filter and the grille with the new ones.
3.
The replacement procedure is attached with the filter.
Our After-sales Service can supply this type of filter.
Light -
how to replace the bulb
Before replacing the bulb, remove the power plug from the
mains socket. Next:
1.
Hold the diffuser as shown and squeeze it slightly.
2.
Slide it towards the rear of the appliance
3.
Unscrew the light bulb as illustrated in the picture.
GUIDE TO SELECTING FUNCTIONS
Functions and settings
Other abnormal appliance operations displayed by indicator lamps.
In case of abnormal appliance operation, all the temperature selection indicator lamps will flash and a beep will sound.
After pressing and holding the alarm deactivation
“RESET”
button, the beep will stop and the indicator lamps will light up,
showing the alarm code (possible alarm codes are explained in the table below).
After the “
RESET
” is released, the indicator lamps will flash until the fault is eliminated. If any alarm shown in the table occurs,
the freezer functions such as temperature adjustment and fast freezing are not available until the fault is eliminated.
When several alarms occur simultaneously, the alarm with the highest priority is displayed (with code 01 being the highest
priority).
After determining the alarm code (between 01 and 05):
•
The user can eliminate the reason of the code 05 alarm by closing the door completely.
•
Code 04 alarm - The alarm deactivates when the minimum required temperature is reached.
•
The other alarms (code 01, 02, 03) - Contact the After-Sales Service and provide the alarm code.
Alarm deactivation
Fast Freezing:
Activate this function before freezing
fresh products.
Press the “
Fast Freezing
” button to start the
function - 3 green indication lamps will light up
simultaneously. This function is automatically
disabled after 24 hours. To deactivate it earlier:
- Press the “
Fast Freezing
” button again - the
temperature selection lights will return to the
previously set temperature level.
- Press the temperature selection button in the
freezer compartment.
Temperature selection
- It is possible to select the
freezer temperature from among 3 levels
(minimum, medium, maximum) by
pressing the temperature selection button .
“
Black-out
”
Alarm (power supply failure) -
in
case of power failure, the appliance automatically
monitors the temperature changes in the freezer
compartment. After the power supply returns, the
“Black-out”
alarm will activate, if the temperature
has risen above the admissible level. This is indicated
by:
- Flashing of the yellow indicator lamp (2).
- Activation of a beep.
When the “
Black-out
” alarm is active, it is
recommended to proceed as follows:
- If the food in the freezer is not frozen but is still
cold, transfer it promptly to the refrigerator
compartment and consume within 24 hours.
- If the food in the freezer is frozen, it has re-frozen
after thawing caused by the power failure. The
consumption of re-frozen food is not
recommended because it lost its nutritive value
and may be hazardous to your health.
Note:
The “
Black-out
” alarm does not guarantee
the food quality and its safety in case of
consumption. It only informs about the necessity to
assess the quality of food in the freezer and
refrigerator compartments. To deactivate the alarm,
press the “
RESET
” button and keep pressed
for approximately 3 seconds, until the indicator light
goes off.
- The temperature will return to the normal
operating cycle level and the beep will silence.
Alarm priority Alarm code Temperature
setting indicator lamps on
minimum
MIN
medium
MED
maximum
MAX
Potentiometer failure 01 No No Yes
Evaporator sensor failure 02 No Yes No
Freezer sensor failure 03 Yes No No
High freezer compartment temperature alarm 04 Yes Yes No
Open door alarm 05 Yes Yes Yes
  • Page 1 1
  • Page 2 2

Whirlpool ARC 5603 Program Chart

ARC 5603
Whirlpool
Brand
Whirlpool
Model
ARC 5603
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents