PRODUCT SHEET
GB
A. Refrigerator Compartment
1.
Lighting
2.
Shelves / Shelf area
2a.
Plastic bottle shelf “Dual” (depending on the model)
3.
Rating plate
6.
Removable bottle holder
7.
Door trays
B. Freezer Compartment
8.
Upper basket (freezing zone)
9.
Ice tray and/or cold accumulator (depending on the model)
10.
Storage basket for frozen food items
12.
The freezer door trays for pizza or other frozen products with a
short storage time (depending on the model)
C. Control panel
Anti-bacterial protection:
5. Hygiene+filter in fan
4. Hygiene crisper
11. Door seals
Note:
• The crisper and the door seals
are manufactured from materials
that inhibit bacterial growth.
• In case of power failure the cold accumulator helps to keep
optimal storage temperature longer.
• The internal temperatures of the appliance
depend on the
ambient temperature, frequency of opening the doors, as well as
location of the appliance. Adjust the thermostat knob depending on
these factors.
• The number and type of shelves,
as well as configuration of
accessories may vary, depending on model. All shelves and door
trays are removable.
• The appliance accessories
are not suitable for washing in a
dishwasher.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, the
refrigerator
compartment
starts operation automatically. Particular control
elements are activated:
•
The indicator lamps on the control panels light up for 2 seconds.
• The alarm becomes activated for 1 second.
The
refrigerator compartment
will turn on after the knob is
moved from the position OFF to any other selected position, from 1
to 7.
NOTE
:
•
If food is placed in the refrigerator before the appliance has cooled
completely, it may deteriorate.
OPERATION DESCRIPTION
Temperature Adjustment:
The temperature in the refrigerator compartment
may be set
by turning the knob on the control panel.
To set a lower temperature, turn the knob to position 7.
- To set a higher temperature, turn the knob to position 1.
- Knob set to position OFF - refrigerator deactivated.
Recommend thermostat knob position is 3-4.
To adjust the temperature in the freezer compartment
, use
the temperature selection function.
•
Each consecutive pressing of the button sets temperature:
- Minimum
- Medium
- Maximum
One of the green indicator lights, as appropriate, ligths up on the
control panel (under the asterisks)
•
The temperature of the freezer is factory set to position (medium).
The middle indicator ligth under the asterisks on the control panel
is on.
•
When the appliance is disconnected from power supply and then
re-connected, the freezer remembers the previously set
temperature.
CONTROL PANEL DESCRIPTION
On/Off buttons
1.
Alarm deactivating button: “
RESET
”.
2.
Yellow indicator light informing of an alarm: “
Black Out
” power
failure.
3.
Temperature selection button
“-/+”
4.
Green lamps indicating the “
Freezer Temperature
”.
5.
“
Fast Freezing
” button.
6.
Knob for turning the refrigerator turn on and setting the
temperature.
Fan with a button
The fan helps to achieve better temperature distribution inside the
refrigerator compartment, and optimizes food storage conditions.
Press button (5b) to turn the fan on when the ambient temperature is
above 27, 28°C, when condensation occurs on the shelves, and in the
instances of high air humidity.
Note:
Do not obstruct the air intake area (5a) with food items.
The fan ONLY runs if the compressor is working.
Make sure to turn the fan off in lower ambient temperatures.
The
Hygiene+ filter
ensures a higher level of hygiene in your
refrigerator through continuous purifying of circulating air from
bacteria. Remove it from the box (found in the crisper drawer (item
4) and insert into the grille (item 5c).
Replace the filter every 6 months.
1.
Remove the filter together with the grille and dispose as a whole.
2.
Replace the filter and the grille with the new ones.
3.
The replacement procedure is attached with the filter.
Our After-sales Service can supply this type of filter.
Light
- how to replace the bulb
Before replacing the bulb, remove the power plug from the mains
socket. Next:
1 - Hold the diffuser as shown and squeeze it slightly.
2 - Slide it towards the rear of the appliance
3 - Unscrew the light bulb as illustrated in the picture.
