DeLorme inReach® for Smartphones User manual

Brand: DeLorme

Model: inReach® for Smartphones

Type: User manual

This manual is also suitable for

DELORME

for smartphones and mobile devices for Earthmate

PN-60w

User Manual

inReach

™

WARNING: Messaging, tracking and SOS functions require an active Iridium satellite subscription. Always test your

device before you go.

This manual is provided as a convenience. GARMIN IS NOT RESPONSIBLE FOR THE ACCURACY OF THIS MANUAL

AND DISCLAIMS ANY LIABILITY ARISING FROM THE RELIANCE THEREON.

Contents

Getting Started ..........................................................................................................................................................3

Welcome...........................................................................................................................................................3

What’s in the Box .............................................................................................................................................3

inReach Interface .............................................................................................................................................. 3

Set Up Your inReach Account ...........................................................................................................................4

Satellite Reception ............................................................................................................................................5

Using the inReach .....................................................................................................................................................6

Power ...............................................................................................................................................................6

Tracking ............................................................................................................................................................ 6

Message ..........................................................................................................................................................6

SOS ..................................................................................................................................................................7

Locate ...............................................................................................................................................................8

Signal LED ........................................................................................................................................................8

Using the inReach with a PN-60w ............................................................................................................................9

Pair the inReach and PN-60w ...........................................................................................................................9

Sync Account Info ............................................................................................................................................. 9

inReach LEDs ................................................................................................................................................. 10

Messages .......................................................................................................................................................10

Tracking ........................................................................................................................................................... 12

SOS .................................................................................................................................................................14

History ............................................................................................................................................................ 16

inReach GPS ................................................................................................................................................... 16

Using the inReach with an Android Mobile Device ................................................................................................. 17

Pair the inReach and Android Device .............................................................................................................. 17

Sync Account Info ...........................................................................................................................................17

inReach LEDs ................................................................................................................................................. 18

Maps ............................................................................................................................................................... 18

Messages .......................................................................................................................................................19

Tracking ...........................................................................................................................................................21

SOS .................................................................................................................................................................22

History ............................................................................................................................................................23

inReach GPS ...................................................................................................................................................24

Using the inReach with an iOS Mobile Device ........................................................................................................25

Pair the inReach and iOS Device ....................................................................................................................25

Sync Account Info ........................................................................................................................................... 25

inReach LEDs .................................................................................................................................................26

Maps ............................................................................................................................................................... 26

Messages .......................................................................................................................................................27

Tracking ........................................................................................................................................................... 29

SOS .................................................................................................................................................................29

History ............................................................................................................................................................31

inReach GPS ................................................................................................................................................... 31

Updated 04/30/12

Safety and Legal Information ...................................................................................................................................32

Safety Information ..........................................................................................................................................32

Legal Information ............................................................................................................................................33

inReach Service ..............................................................................................................................................34

Additional Information ..................................................................................................................................... 34

Specications ..........................................................................................................................................................35

Resources ................................................................................................................................................................36

3DeLorme inReach User Manual | Getting Started

Getting Started

Welcome

The inReach™ two-way satellite communicator with GPS keeps you in reach wherever you go—whether you want to

share your trip, check in with loved ones, or send an SOS in an emergency—you’re always in reach.

• Use the inReach for mobile devices with the Earthmate

app on your compatible phone or tablet to take full

advantage of two-way messaging and DeLorme maps.

For information about compatible devices, visit delorme.com/inreach.

• Use the inReach for Earthmate

PN-60w to experience all the PN-60w has to offer, with the addition of two-way

messaging.

• Use either inReach alone to send your location to explore.delorme.com; send predened messages that include

your location to your contacts, Facebook, or Twitter; or send an SOS in an emergency.

What’s in the Box

Your inReach package contains:

• inReach with pack clip and lanyard

• Micro USB cable for rmware updates

• 2 lithium AA batteries

• Quick Start Guide

inReach Interface

Tracking

Message

SOS

LEDs

Power

Signal LED

Battery compartment

Antenna

SOS Button Lock

4 Getting Started | DeLorme inReach User Manual

Batteries

The battery compartment is on the bottom of the inReach. Inside the battery compartment, you’ll nd a label with your

device’s IMEI number and authorization code; you’ll need this when you activate your inReach at explore.delorme.com.

To insert the batteries

Remove the cover by unscrewing the D-ring screws, insert two lithium AA batteries according to the polarity symbols,

and then replace the cover.

Low battery warning

When the batteries are low (approximately 10% of their power remains), the Power LED will ash red once every three

seconds. When power loss is imminent, the Power LED ashes red every 1.5 seconds.

Two AA batteries are required for use. You can use lithium, alkaline or NiMH batteries. The default battery

prole setting is for lithium batteries, which provide the best performance.

If you are not using lithium batteries, you should change the battery prole to ensure battery performance is

correctly calculated.

To change the battery prole

The inReach is optimized to use lithium batteries. If you use alkaline or NiMH batteries or if you switch back to lithium

after using alkaline or NiMH batteries, you must change your battery prole to ensure battery performance is correctly

calculated.

1. Press and hold the Power and Message buttons at the same time to cycle the device through the three battery

proles.

» You can do this as you power on the inReach or at any time when it is already powered on.

» The Power and Message LEDs ash once for lithium, twice for alkaline, and three times for NiMH.

» The most recently used prole ashes rst. For example, if you have never changed the battery prole, when

you press the buttons, the LEDs will ash once.

2. Continue to press and hold the buttons to advance to the other battery proles, and release the buttons when you

reach the battery prole you want to use.

Micro USB Port

The micro USB port is located in the battery compartment. This is used to update the device (this happens

infrequently). If an update is required, you will be notied and instructions will be provided.

Set Up Your inReach Account

Create an account and activate the inReach

Before you start using the inReach, you must set up an account at explore.delorme.com. During the account setup

process, you will choose your inReach service plan and add information about your emergency contacts. Once you

messages in the Message Book so you can better use the inReach in standalone mode.

Click the Help link at the top of explore.delorme.com for help with using the website.

• If you will be using the inReach with an Earthmate

PN-60w, see Using the inReach with a PN-60w on page

9 for information about syncing your account info with your device. See the Help page on explore.delorme.com

for detailed information.

• If you will be using the inReach with a smartphone or mobile device, you will need to download the free Earthmate

app and sync it with your explore.delorme.com account.

5DeLorme inReach User Manual | Getting Started

» For Android™ devices, go to the Google Play store. For more information about using the app with an Android

device, see Using the inReach with an Android Mobile Device on page 17.

» For iPhone

, iPod

, and iPad

, go to the iTunes

App Store. For more infomation about using the app with an iOS

device, see Using the inReach with an iOS Mobile Device on page 25.

Satellite Reception

The inReach requires a clear view of the sky to acquire a GPS x and transmit your messages over the Iridium

satellite

network. This process should take less than one minute, but it could take more time if the line of sight is obstructed.

For the best reception when wearing the inReach, attach it to a backpack strap on your upper body or place it in a

pocket at the top of a backpack. If you attach the pack clip to your belt, some of the signal may be blocked by your

body and could prevent proper transmission of messages and tracking points.

6 Using the inReach | DeLorme inReach User Manual

Using the inReach

You can use the inReach as a standalone device when you don’t want to use it with a compatible device. You can also

interact with the inReach directly when it is connected to a compatible device.

Power

• To turn the inReach on, press and hold the Power button until the Power LED ashes green and then release the

button. When the inReach is powered on, the Power LED will ash green once every three seconds.

• To turn the inReach off, press and hold the Power button until the Power LED ashes rapidly and then release the

button.

• When power is low, the Power LED ashes red once every three seconds. See Batteries on page 4 for more

information.

• When there is not enough power to send any messages or tracking points, the Power LED ashes red every 1.5

seconds. See Batteries on page 4 for more information.

Tracking

The Tracking button allows you to send your location to explore.delorme.com when you are using the inReach in

standalone mode. When you are moving, your location is sent every 10 minutes. When you are stationary, your location

is sent every four hours; if you move more than 100 meters, tracking at 10 minute intervals resumes.

• To start tracking, press and hold the Tracking button until the Tracking LED ashes and then release the button.

The LED will ash green once every three seconds while tracking until you cancel tracking or turn off the inReach.

• To stop tracking, press and hold the Tracking button until the Tracking LED ashes rapidly and then release the

button.

You can also use tracking when connected with an Earthmate PN-60w (see page 12) or mobile device (see page

21 for Android and page 25 for iOS). In addition, tracking can be initiated from explore.delorme.com by anyone

who can log in to your account. See the Help at explore.delorme.com for more information.

Message

Use the Message button to send predened inReach messages that you created on explore.delorme.com. You can

create up to three messages—it’s a good idea to make a note of the messages in the proper order and take it with you.

The message is sent to contacts you designated on explore.delorme.com when you created the message.

• To send predened message one, press and hold the Message button until the Message LED ashes once and

then release the button. The Message LED will ash once every three seconds until the message is sent.

• To send predened message two, press and hold the Message button until the Message LED ashes twice and

then release the button. The Message LED will ash twice every three seconds until the message is sent.

• To send predened message three, press and hold the Message button until the Message LED ashes three

times and then release the button. The Message LED will ash three times every three seconds until the message

is sent.

Notes

The LED ashes for choosing the message will cycle in order until you release the Message button to make a

selection.

7DeLorme inReach User Manual | Using the inReach

Message LED

• Sending a message—The Message LED ashes green once every three seconds when you send a message

(including SOS messages); it stops ashing when the message has been sent. You should also watch the Signal

LED to ensure you have a good signal; see page 8 for more information.

• New message—The Message LED ashes green twice every 1.5 seconds when a message has been sent to

you. You can view incoming messages on a connected device.

To dismiss the new message indicator, press and release the Message button. You can also dismiss the message

by viewing it on a connected device.

SOS

IMPORTANT! Use SOS only in an emergency. Do not test SOS—all SOS activations are real and a false activation

could result in charges to you.

The inReach cannot be powered off while an SOS message is being sent or cancelled.

Use the SOS button to send an emergency message to search and rescue when you are using the inReach in

standalone mode. You can also use the SOS button on the inReach when it is paired with a compatible device. Your

location will be relayed to search and rescue and they will dispatch emergency services and notify the emergency

contacts listed on your account at explore.delorme.com account. Your location will automatically update until you

cancel the SOS.

Your location will be sent to search and rescue as follows:

• First ten minutes, every sixty seconds

• Ten minutes to one hour, every ten minutes

• One hour to eight hours, every 15 minutes

• Eight hours to 24 hours, every 60 minutes

After the rst ten minutes, if you are stationary, your location is sent every thirty minutes; the transmission rate is

slowed to preserve battery life.

If your position changes by more than 100 meters, your location will be sent again. If you don’t need to move for safety

reasons, stay where you are to preserve battery life and to make it easier for search and rescue to locate you.

Note If you do not have a clear view of the sky, the SOS messages will be stored and then sent as soon as you have

a good signal. The Signal LED will ash green when you have a good signal; it will ash red when you do not have a

good signal; see page 8 for more information.

To send an SOS message

1. Press and slide the SOS button lock to the left.

2. Press and hold the SOS button until the SOS LED begins to ash and then release the button. The SOS LED

ashes green once every three seconds. In addition, the Message LED ashes green once every three seconds

while the message is being sent.

When the SOS and Message LEDs begin ashing green more rapidly (every 1.5 seconds), it indicates that your

SOS message was received by an emergency responder and they are acknowledging your message.

To conrm that you know search and rescue has received your message, press and immediately release the SOS

button. The SOS LED resumes ashing green every three seconds.

If you are unable to conrm that you know your message was received, help will still be sent.

To cancel an SOS message

1. Press and hold the SOS button until the SOS LED ashes rapidly and then release the button.

This sends a message to search and rescue to let them know that the emergency has been resolved and

assistance is no longer needed.

2. Press and slide the SOS button lock to the right.

8 Using the inReach | DeLorme inReach User Manual

When you cancel SOS, the SOS LED ashes rapidly and then stops. The Signal and Message LEDs ash until the

cancellation message has nished sending.

IMPORTANT! You must cancel SOS to stop search and rescue from sending help. Turning off the inReach device or

a connected device or taking out the batteries will NOT tell search and rescue to stop the rescue. If you replace the

batteries when an SOS is in progress, press and hold the SOS button again to update your location.

For more information about GEOS Search and Rescue, visit geosalliance.com.

Locate

Anyone who has your explore.delorme.com account login information can send a tracking point request from the

website to the inReach to determine the location of the inReach. When the inReach receives the request, it sends

a tracking point (a total of two tracking points are used). If you are using the inReach as a standalone device, your

inReach will automatically respond. If you are using the inReach with your PN-60w or mobile device you will be notied

of the request. See the Help on explore.delorme.com for more information.

Signal LED

The Signal LED indicates the status of the connection between the inReach and the GPS or Iridium satellites. Green

ashes indicate that messages or tracking points are being sent. Red ashes indicate that you don’t have a good signal

and messages or tracking points aren’t being sent.

• The Signal LED ashes green once every three seconds when the inReach is sending a message of any type.

The LED will stop ashing when the message is sent, unless the inReach is tracking in standalone mode. When

tracking in standalone mode, the Signal LED ashes continuously to indicate the status of the GPS satellites.

• The Signal LED ashes red once every three seconds when the inReach is having trouble sending or conrming

a message. The Signal LED will ash red until the message is successfully transmitted or cancelled. If the LED is

ashing red, try moving to a new location to get a better view of the satellites.

9DeLorme inReach User Manual | Using the inReach with a PN-60w

Using the inReach with a PN-60w

When you pair your DeLorme inReach with the DeLorme Earthmate PN-60w, you have the best of both worlds—a

powerful, rugged handheld GPS device and the ability to send and receive messages wherever you go—whether you

want to share your trip, check in with loved ones, or send an SOS in an emergency.

Note To use the inReach with a PN-60w, you must ensure the rmware on the PN-60w is updated to the latest

version. You can update the rmware through Earthmate Sync in Topo North America or visit support.delorme.com.

Quick Tips

• To select something—for example, a check box, an on-screen button, or a drop-down list— or to open the on-

screen keyboard to enter text, use the arrow keypad to highlight the item and then press ENTER.

• To exit a list or screen, press QUIT. To exit the on-screen keyboard, highlight OK and press ENTER.

• For detailed help on using the PN-60w, see the DeLorme Earthmate PN-60 User Manual available at

manuals.delorme.com.

Pair the inReach and PN-60w

Before you can use the inReach and PN-60w together, you must rst pair them. Pairing connects the inReach and

PN-60w wirelessly. Open the inReach Page on the PN-60w.

You need pair the devices only once. After you have successfully paired the devices, they will connect when

both devices are powered on and near each other.

1. Press MENU, select Pair DeLorme inReach, and press ENTER.

2. With the inReach powered off, press and hold its Power button until the Power LED ashes green. Then, press

ENTER on the PN-60w.

To unpair the devices, from the inReach Page on the PN-60w, go to MENU > Unpair DeLorme inReach.

Note The wireless antenna settings for the PN-60w are found under Settings > Wireless.

Sync Account Info

and then click the red Sync PN-60w button at the upper right corner of the website to send contacts—including

Facebook and Twitter—Quick Text messages, and MapShare information to your device. Syncing allows you to send

contacts and messages from explore.delorme.com to your PN-60w—contacts you have added to the

PN-60w are not synced back to explore.delorme.com.

Note You will be prompted to install the DeLorme GPS Browser Plugin the rst time you sync. During the initial

process, you will need to close your browser.

10 Using the inReach with a PN-60w | DeLorme inReach User Manual

inReach LEDs

The inReach LEDs reect what you are doing on the PN-60w inReach Page. See the Using the inReach section

starting on page 6 for more information.

Messages

The Messages page displays a list of conversations. The number of unread messages is indicated in the page

header and the conversations with unread messages are indicated with a green dot. All sent and received messages

are available at explore.delorme.com and on the History page on the device. See History on page 16 for more

information.

Messages that you send and receive while the inReach and PN-60w are connected are indicated with a message icon

on the PN-60w Map Page. To view the message details from the map, use the arrow keypad to pan to the message

icon and press ENTER.

When you have a new message, an unread message indicator appears on the Map Page. Once you have read the

messages, the indicator is dismissed. You can also dismiss the message indicator by pressing and releasing the

Message button on the inReach.

Create Messages

Create messages (of up to 160 characters) and send them to the contacts that you synced from explore.delorme.com

or add new addresses directly to the PN-60w.

• The predened Quick Text messages you set up at explore.delorme.com and synced to your PN-60w are

available in the drop-down list on the Compose Message page, or you can create a new message.

• Post to Facebook and Twitter. Link your accounts at explore.delorme.com—Facebook and Twitter will appear in

your address book and each has its own conversation thread. You can post to your own Facebook wall or Twitter

account; you will not receive comments or replies on the PN-60w.

• Post messages to your MapShare page. You must rst set up MapShare on explore.delorme.com and sync your

PN-60w. MapShare will appear in your address book and it has its own conversation thread.

• Create messages on your PN-60w when you aren’t connected to your inReach. When you are connected, the

message will be sent.

To send a new message

1. From the inReach Page, select Messages, and then select New Message.

2. With the address text box highlighted, press ENTER to open the keyboard.

Start entering a name. Matches from your contact list will appear. Select OK to add the name shown or to see all

11DeLorme inReach User Manual | Using the inReach with a PN-60w

possible matches when multiple matches exist, and then select the address to use. Select OK to enter another

address. Select OK twice to exit.

Enter the entire email address or mobile phone number and press ENTER. An address that has not been synced

from explore.delorme.com to the PN-60w is subtracted from the 160-character composed message allotment.

Select OK to enter another address. Select OK twice to conrm the addresses.

Select the address book to the right of the text box and scroll through your contacts. To select a contact, highlight

it and press ENTER. Press QUIT to exit the list.

3. To select a Quick Text message that you synced from explore.delorme.com, select the Compose Text Message

drop-down list and select the message.

To type a new message, select Type message here and press ENTER. Then, type the message. The number of

characters remaining displays in the Compose Message area.

4. Select Send.

To reply to a conversation

1. From the inReach Page, select Messages.

2. Select the conversation that you want to reply to. Select Reply, and then enter your message.

3. Select Send.

Message Sending

The message sending icon spins until the message is sent. Once the message has been sent, the location icon is

displayed If the failed message icon appears, the message has not been sent. Make sure the PN-60w and inReach

are connected and that you have a clear view of the sky. Attempts to send a failed message will continue until you have

a good signal. If after 15 minutes the message has not been sent, you will be prompted to continue sending or cancel

the message.

On the inReach, the Signal and Message LEDs ash while the message is being sent. The Signal LED indicates the

status of the connection to the satellites. See page 8 for more information.

Message Details

The details page displays information about the message. From the Messages page, select a conversation thread to

view the messages, and then select a message to view its details. You can also view message details from History;

see page 16 for more information.

12 Using the inReach with a PN-60w | DeLorme inReach User Manual

To Do this

View the message location on

the map

Select View.

Route to the message location

Select Route. See the DeLorme Earthmate PN-60 User Manual (manuals.

delorme.com) for more info about routing.

Mark a waypoint at the message

location

Select Mark. See the DeLorme Earthmate PN-60 User Manual (manuals.

delorme.com) for more info about waypoints.

Delete the message Go to MENU > Delete message.

Reference Points

A reference point is a location that is somewhere other than your current location. You can use the PN-60w to send a

map location, geocache, or waypoint as a reference point message using the inReach. From the details page for the

point, go to MENU > Send Point/Geocache/Waypoint with inReach. See the Earthmate PN-60 User Manual at

manuals.delorme.com for more information.

Message Responses

When you send a message, the method used for sending determines how the recipient can respond.

• Text/SMS message –Recipients receive a text message. They can reply to the message directly. The carrier’s text

messaging rates apply in addition to your inReach account messages. The text message also includes a link to a

map of your location.

• Email–Recipients receive an email with a link. The recipient can use the link to go to a website where they can

view your location on a map and reply to you via the website. They cannot reply directly to the email.

• inReach–Other inReach users receive a message on their PN-60w or in the Android Earthmate app. They can see

your message on their map and can also view the map from the message details page.

Incoming Messages

When you have new messages:

• The inReach icon on the Home Page displays the number of unread messages.

• A sound plays when you receive a message. To control sound settings, go to

Settings > Sound > Message.

• In the Messages page list, the header indicates the number of unread

messages and a green dot indicates the conversations with unread messages.

• On the Map Page, the number of unread messages is displayed

• You can add someone who sends you a message to your address book or edit

an existing address book entry to add a new source. From the conversation

thread, go to MENU > Add Sender as New Contact/Add Sender to Existing

Contact.

Tracking

When you use the inReach’s tracking feature with your PN-60w, you can set the interval for sending tracking points to

the map at explore.delorme.com. The tracking points recorded while the PN-60w and the inReach are paired are visible

on the PN-60w’s Map Page and you can view information about them in the inReach History page. Regular tracking

points are yellow pins and SOS tracking points are red pins.

13DeLorme inReach User Manual | Using the inReach with a PN-60w

If you set up a MapShare page on explore.delorme.com, you can send a link to share your travels. The MapShare page

has options you can customize, so you can allow people to send you messages, send a request to view your current

location, or just view the tracking points and messages you send to MapShare.

Anyone who has your explore.delorme.com account login information can send a location or tracking request from the

website to the inReach. When the inReach receives the request, it sends one tracking point for a location request (a

total of two tracking points are used) or turns on tracking for a tracking request. If you are using the inReach with your

PN-60w, you will be notied of the request. See the Help page on explore.delorme.com for more information.

Handing off Tracking

When your PN-60w and inReach are connected, you can start tracking on the PN-60w and then power it off to save

battery life—the inReach will begin tracking in standalone mode. No tracking points will be recorded on your PN-60w

when it is powered off, but tracking points will be visible on explore.delorme.com and on your MapShare page.

Alternatively, if you start tracking on the inReach and then power on your PN-60w, you can monitor tracking on the

PN-60w.

You can also stop tracking on either device when they are connected.

To start tracking from the PN-60w

The tracking interval determines how often tracking points are sent via the inReach to explore.delorme.com and

your MapShare page. To save battery life, select a longer interval so that fewer tracking points are sent while you

are moving. When you are stationary, tracking points are sent every four hours; if you move more than 100 meters,

tracking resumes at the interval you set.

1. Make sure your inReach is powered on and connected before you begin. From the inReach Page, select Tracking.

2. To change the tracking interval, click Edit.

3. From the When moving, send every drop-down list, select a time interval and then press QUIT to exit the interval

setup page.

4. On the Tracking Setup page, if you want to send a link to your MapShare page, select Share. Then enter or add

addresses to your message and click Send. The message thread displays—press QUIT to exit.

5. On the Tracking Setup page, select Start Tracking. The Tracking Details page displays. On the inReach, the Signal

and Tracking LEDs ash. If tracking points fail to send successfully, you will be notied.

6. To stop tracking, select Stop Tracking.

14 Using the inReach with a PN-60w | DeLorme inReach User Manual

SOS

IMPORTANT! Use SOS only in an emergency. Do not test SOS—all SOS activations are real and a false activation

could result in charges to you.

The inReach cannot be powered off while an SOS message is being sent or cancelled.

The SOS feature uses the inReach to send a message to search and rescue in a critical or life-threatening emergency.

With the PN-60w, you can type a message giving search and rescue details about your situation and they can reply to

you. They will dispatch emergency services and notify the emergency contacts you listed on your account at explore.

delorme.com account. Your location will automatically update until you cancel the SOS.

Your location will be sent to search and rescue as follows:

• First ten minutes, every sixty seconds

• Ten minutes to one hour, every ten minutes

• One hour to eight hours, every 15 minutes

• Eight hours to 24 hours, every 60 minutes

After the rst ten minutes, if you are stationary, your location is sent every thirty minutes; the transmission rate is

slowed to preserve battery life.

If your position changes by more than 100 meters, your location will be sent again. If you don’t need to move for safety

reasons, stay where you are to preserve battery life and to make it easier for search and rescue to locate you.

You can monitor the SOS on the Tracking page. From there you can also cancel the SOS or send a message to search

and rescue. The tracking points and messages are also visible on the Map Page.

Note If you do not have a clear view of the sky, the SOS messages will be stored and then sent as soon as you have a

good signal.

LEDs

• The SOS LED ashes green while the SOS is in progress.

• The Signal LED ashes green when messages are being sent; it will ash red when you do not have a good signal

(see page 8 for more information).

• The Message LED ashes green while any SOS message (including a cancellation message) is being sent. See

page 7 for more information.

Handing off SOS

When your PN-60w and inReach are connected, you can start the SOS on the PN-60w and then power it off to save

battery life—the inReach will send the SOS in standalone mode. No SOS tracking points or messages will be recorded

on your PN-60w when it is powered off, but both will be visible on explore.delorme.com.

15DeLorme inReach User Manual | Using the inReach with a PN-60w

Alternatively, if you start SOS on the inReach and then power on your PN-60w, you can monitor SOS tracking and send

and receive messages from search and rescue.

To send an SOS message

1. Make sure your inReach is powered on and connected.

2. From the inReach Page, select SOS and then select Emergency.

3. Press ENTER to select Compose SOS. The recipient is search and rescue—this cannot be changed.

4. If possible, type a message providing details about your emergency. If you cannot type a message, the default

message will be sent.

5. Select Send SOS. The countdown timer displays for 10 seconds. To cancel the SOS before it’s sent, press QUIT.

6. The SOS conversation thread will appear. Select Reply to send another message to search and rescue or to

respond to them.

To cancel an SOS message

Select Cancel SOS. This sends a message to search and rescue to let them know that the emergency has been

resolved and assistance is no longer needed. You will receive a reply acknowledging the cancellation.

On the inReach, the Signal and Message LEDs ash until the SOS messages have nished sending. The SOS

message thread will close once the cancellation has been processed.

You can also cancel the SOS on the inReach; see page 7 for more information.

IMPORTANT! You must cancel SOS to stop search and rescue from sending help. Turning off the inReach device or

a connected device or taking out the batteries will NOT tell search and rescue to stop the rescue. If you replace the

batteries when an SOS is in progress, press and hold the SOS button again to update your location.

For more information about GEOS Search and Rescue, visit geosalliance.com.

Addresses

The address book displays a list of contacts you have synced from explore.delorme.com as well as any contacts you

add to the address book on the PN-60w. Note that contacts you add or delete or edits you make on the PN-60w are

not synced back to explore.delorme.com—you should update explore.delorme.com with any changes you make on

your device that you want to keep and then sync again.

You cannot add, edit, or delete Facebook, Twitter, or MapShare contacts on the PN-60w. You must add them to

explore.delorme.com and sync them to the device.

To view a contact’s details

From the inReach Page, select Addresses, and then select the contact.

To add a contact

1. From the inReach Page, select Addresses, and then select New Contact.

2. Complete the contact’s information by selecting each eld to open the on-screen keyboard.

3. To add elds, press MENU, select Add additional elds, and select the type of eld to add. Then, enter the

information.

4. Press QUIT to exit.

To edit a contact

1. From the inReach Page, select Addresses, and then select the contact to view its details.

2. Select the eld to edit OR to add a eld, press MENU, select Add additional elds, and select the type of eld to

add. Then, enter the information.

3. Press QUIT to exit.

16 Using the inReach with a PN-60w | DeLorme inReach User Manual

To delete a contact

1. From the inReach Page, select Addresses, and then select the contact.

2. Go to MENU > Delete contact.

History

The History page displays a chronological list of activity by day.

• To view the details for a day, select it. Select View All to view all message and tracking points on the map, or

select an individual point to view its details.

• To export all history, from the History page, go to MENU > Export History and then save the .gpx le to the

internal memory or an SD card in the device.

• To export the history for a specic day, select the day to view its details, and then go to MENU > Export History

for Day and save the .gpx le to the internal memory or an SD card in the device.

• To delete all history, from the History page, go to MENU > Delete All History.

• To delete the history for a specic day, select the day to view its details, and then go to MENU > Delete History

for Day.

inReach GPS

The inReach’s internal GPS will be used for location information in outgoing messages when the GPS of a connected

PN-60w is disabled.

When the connected PN-60w’s GPS is disabled:

• The inReach’s location is not transmitted back to the PN-60w.

• Tracking points (both normal and SOS) do not appear on the connected PN-60w. The points are sent to explore.

delorme.com.

• Text messages are not indicated with the location icon on the connected PN-60w even though a position is

associated with them. Text messages are geolocated on explore.delorme.com.

If you need to display location for messages and tracking points on a connected PN-60w, you must enable GPS on the

PN-60w.

17DeLorme inReach User Manual | Using the inReach with an Android Mobile Device

Using the inReach with an Android Mobile Device

When you pair your DeLorme inReach with your Android phone or tablet, you can send and receive messages

wherever you go. You can share your trip, check in with friends and family, or send an SOS in an emergency.

Android version 2.1 and above is supported; 2.2 or above is recommended.

To get started, go to Google Play and download the free Earthmate app to your Android device.

The main menu in the Earthmate app gives you options to pair the inReach, view Help, sync with your account on

explore.delorme.com, update settings, and exit the app. Additional options are available on each page. Go to the menu

within the app to see the options.

Note To close the Earthmate app, go to MENU > Exit.

Pair the inReach and Android Device

You must pair your inReach with your Android device to use them together.

• Your device’s Bluetooth must be turned on to pair with the inReach. You will be prompted to turn on Bluetooth in

your device’s settings if you don’t have it on already.

• If you see your inReach device appear in the list and the searching message is still active, tap Back to dismiss the

message and then tap the device name.

• Some Android device’s require that you conrm the Bluetooth connection. Check the notications window on your

phone if it doesn’t appear to be connecting.

• If you have problems pairing, try initiating the process through your mobile device’s settings rather than through

the app.

You need pair the devices only once. After you have successfully paired the devices, they will connect when

both devices are powered on and near each other.

To pair the devices, tap MENU > Pair and follow the instructions.

If you turn off your mobile device to save battery life or close the Earthmate app, the inReach will continue any tracking

or SOS messaging that is in progress.

Sync Account Info

Log into explore.delorme.com to make sure your account contacts and Quick Text messages are up to date. If you

want to post messages to Facebook, Twitter, or your MapShare page, you must set that information up before you

sync.

18 Using the inReach with an Android Mobile Device | DeLorme inReach User Manual

To sync account info

Tap MENU > Sync to sync account info from explore.delorme.com with your phone. The rst time you sync, you will

be prompted to enter your explore.delorme.com account info. Note that contacts and quick text messages you add to

explore.delorme.com are synced to your phone but contact info you add to your phone is not synced back to explore.

delorme.com.

inReach LEDs

The inReach LEDs reect what you are doing in the Earthmate app. See Using the inReach section starting on page

6 for more information.

Maps

Downloading Maps

The rst time you use the map, you will be prompted to download the DeLorme World Reference Data base map. It is

recommended that you download the maps when you have a Wi-Fi connection because of the le size. An SD card is

required to download maps.

You can download highly-detailed DeLorme topographic maps for North America. Tap the map download icon to

select a region for download.

Tap a region you have already downloaded to delete it.

Map Controls and Settings

See the app’s Map Help topic for information about map controls and settings. To change map settings, go to MENU >

Settings > Map (MENU > Settings from the Map page).

Reference Points

A reference point is a location that is somewhere other than your current location. To get information about a place on

the map, long press the location on the map. The reference point icon appears. Tap the icon to view details about

the point, send a message that includes the reference point, or delete the reference point. When you send a reference

point as a message, it is saved on the map.

To view another point, long press another place on the map.

Page is loading ...

DeLorme inReach® for Smartphones User manual

Brand: DeLorme

Model: inReach® for Smartphones

Type: User manual

This manual is also suitable for

Download PDF

report

DeLorme inReach® for Smartphones User manual

This manual is also suitable for

DeLorme inReach® for Smartphones User manual

Related papers

Other documents