SICK WTB4FT DoubleLine Operating instructions

O P E R A T I N G I N S T R U C T I O N S

WTB4FT DoubleLine

Miniature photoelectric sensors

O P E R A T I N G I N S T R U C T I O N S

WTB4FT DoubleLine

Miniature photoelectric sensors

de

en

es

fr

it

ja

pt

ru

zh

Described product

W4F

WTB4FT DoubleLine

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be

reserved for SICK AG. Reproduction of this document or parts of this document is

only permissible within the limits of the legal determination of Copyright Law. Any modi‐

fication, abridgment or translation of this document is prohibited without the express

written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

2006/42/EC

NO

SAFETY

8025300 / 2020-11-13 | SICK

Subject to change without notice

3

Contents

1 General safety notes......................................................................... 5

2 Notes on UL approval........................................................................ 5

3 Intended use...................................................................................... 5

4 Operating elements and status indicators.................................... 5

5 Mounting............................................................................................. 6

6 Electrical installation........................................................................ 6

7 Commissioning.................................................................................. 8

7.1 Alignment.................................................................................................. 8

7.2 Check the application conditions:........................................................... 8

7.3 Setting....................................................................................................... 9

7.4 Process data structure............................................................................. 11

8 Troubleshooting................................................................................. 11

9 Disassembly and disposal............................................................... 11

10 Maintenance...................................................................................... 12

11 Technical specifications................................................................... 12

11.1 Dimensional drawings.............................................................................. 13

CONTENTS

4

8025300 / 2020-11-13 | SICK

Subject to change without notice

1 General safety notes

■

Read these operating instructions before commissioning the device.

■

Connection, mounting and configuration of the device must only be carried

out by qualified personnel.

■

2006/42/EC

NO

SAFETY

This device does not constitute a safety component as defined in the

Machinery Directive.

■

When commissioning the device, ensure adequate protection against mois‐

ture, contamination and UV radiation (sunlight).

■

These operating instructions contain information required during the life cycle of

the photoelectric sensor.

2 Notes on UL approval

The device shall be supplied from an isolating transformer having a secondary overcur‐

rent protective device that complies with UL 248 to be installed in the field rated either:

a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or

b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).

Alternatively, they can be supplied from a Class 2 power supply.

UL Environmental Rating: Enclosure type 1

3 Intended use

The WTB4FT DoubleLine is an opto-electronic photoelectric background suppression

proximity sensor (referred to as “sensor” in the following) for the optical, non-contact

detection of objects, animals, and persons. If the product is used for any other purpose

or modified in any way, any warranty claim against SICK AG shall become void.

4 Operating elements and status indicators

Photoelectric proximity sensor with background suppression.

Table 1: Operating elements and status indicators

WTB4

FT

Dou‐

ble‐

Line

-xxxxxx20Axx -xxxxxx30Zxx -xxxxxx10Zxx -xxxxxxA0Zxx

1

3

2

4

34

2

34

1

BluePilot blue: sensing range display

2

Press-turn element / Potentiometer / Teach-Button: adjusting the sensing range

3

LED indicator yellow: status of received light beam

GENERAL SAFETY NOTES 1

8025300 / 2020-11-13 | SICK

Subject to change without notice

5

4

LED indicator green: supply voltage active

5 Mounting

Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐

sories).

Figure 1: Alignment of the sensor relative to the object direction

Note the sensor’s maximum permissible tightening torque of < 0,4 Nm.

Note the preferred direction of the object relative to the sensor, cf. see figure 1, page 6.

6 Electrical installation

The sensors must be connected in a voltage-free state. The following information must

be observed, depending on the connection type:

– Male connector connection: Pin assignment

– Cable: Wire color

Only apply voltage/switch on the voltage supply once all electrical connections have

been established.

Explanations on connection diagram.

BN = brown

WH = white

BU = blue

BK = black

MF (pin 2 configuration) = external input, teach-in, switching signal

Q

L1

/C = switching output, IO-Link communication

Test = Test input

U

B

: 10 ... 30 V DC

Table 2: Electrical connection

x4 x2 xH x1 xG

1 = BN

2 = WH

3 = BU

4 = BK

1

2

4 3

2

1

4

3

0.14 mm

2

AWG26

1

4

3

0.14 mm

2

AWG26

5 MOUNTING

6

8025300 / 2020-11-13 | SICK

Subject to change without notice

Table 3: DC

WTx4Fx- xx16xxxxA00 xx16xxxxA01-

A99

xx161 xx162 xx16A xx13N xx16x

1 = BN + (L+)

2 = WH MF

3 = BU - (M)

4 = BK Q

L1

/C

Default: MF

Q

Q no function no function www.sick.com

8022709

Default:

Q

L1

/C

Q

www.sick.com

8022709

Table 4: DC

WTx4Fx- xx11xxx0Zxx

xx112 xx111 xx312 xx311

1 = BN + (L+)

2 = WH

Q

Q no function

3 = BU - (M)

4 = BK Q

Q

Table 5: DC

WTx4Fx- xx31xxx0Zxx

xx311 xx312

1 = BN + (L+)

3 = BU - (M)

4 = BK Q

Q

Table 6: Push / Pull

Q

push-pull

(≤ 100 mA)

+ (L+)

Q

‒ (M)

+ (L+)

Q

‒ (M)

ELECTRICAL INSTALLATION 6

8025300 / 2020-11-13 | SICK

Subject to change without notice

7

Q

push-pull

(≤ 100 mA)

+ (L+)

Q

‒ (M)

+ (L+)

Q

‒ (M)

7 Commissioning

7.1 Alignment

Alignment

Align the sensor with the object. Select the position so that the red emitted light beam

hits the center of the object. You must ensure that the optical opening (front screen) of

the sensor is completely clear [see figure X].

7.2 Check the application conditions:

Sensing range

WTB4FT DoubleLine are photoelectric proximity sensors with background suppression.

Depending on the remission of the object to be detected, and perhaps the background

behind it, a minimum distance (y) between the set sensing range (x) and the back‐

ground should be maintained.

Check the application conditions:

Adjust the sensing range and distance to the object or background as well as the

radiance capability of the object according to the corresponding diagram (x = sensing

range, y = minimum distance between set sensing range and background [white, 90%])

Radiance factor: 6% = black 1, 18% = gray 2, 90% = white 3 (referring to standard

white as per DIN 5033). We recommend that the adjustment be performed with an

object of low remission.

The minimum distance (= y) for the background suppression can be determined from

the diagram as follows:

Example: x = 50 mm, y = 1 mm. That is, the background (white, 90%) is suppressed at

a distance of > 1 mm from the sensor.

NOTE

Observe the minimum distance of 8 mm.

0

20

(0.79)

10

(0.39)

40

(1.57)

30

(1.18)

50

(1.97)

80

(3.15)

100

(3.94)

20

(0.79)

40

(1.57)

60

(2.36)

0

y

x

y

x

Minimum distance in mm (y) between the set sensing

range and white background (90 % remission)

Example:

Safe suppression of the background

White background (90 %)

Black object (6 % remission)

Set sensing range x = 80 mm

Needed minimum distance to white

background y = 5 mm

Distance in mm (inch)

Recommended sensing range for

the best performance

60

(2.36)

120

(4.72)

1

6%/90%

90%/90%

33

2

18%/90%

Figure 2: Characteristic line

0

8

15

8

15

7 120

Distance in mm (inch)

112

117

1

2

3

15

80

(3.15)

100

(3.94)

20

(0.79)

40

(1.57)

60

(2.36)

120

(4.72)

D

C

A B

BluePilot

E

F

Figure 3: bar graph

A Sensing range min. in mm

B Sensing range max. in mm

7 COMMISSIONING

8

8025300 / 2020-11-13 | SICK

Subject to change without notice

C Viewing range

D Adjustable switching threshold for fore‐

ground suppression

E Sensing range indicator

F Teach-Turn adjustment

0

Distance in mm (inch)

Dimensions in mm (inch)

4

(0.16)

6

(0.24)

–6

(–0.24)

–4

(–0.16)

0

2

(0.08)

–2

(–0.08)

10

(0.39)

220

(8.66)

80

(3.15)

40

(1.57)

120

(4.72)

160

(6.30)

200

(7.87)

240

(9.45)

130

(5.12)

Recommended sensing range for

the best performance

Figure 4: Light spot size

0

Distance in mm (inch)

Dimensions in mm (inch)

20

(0.79)

60

(2.36)

40

(1.57)

80

(3.15)

100

(3.94)

120

(4.72)

12

(0.47)

15

(0.59)

–3

(–0.12)

0

6

(0.24)

9

(0.35)

3

(0.12)

10

(0.39)

120

(4.72)

50

(1.97)

Apex angle 4°

Recommended sensing range for

the best performance

Figure 5: Light spot size

7.3

Setting

Sensing range adjustment

WTB4FT DoubleLine-xxxxxx1xAxx

Adjustment via a potentiometer:

Clockwise rotation: Sensing range increased.

Counterclockwise rotation: Sensing range reduced.

WTB4FT DoubleLine-xxxxxx2xAxx

The sensing range is adjusted by pressing the teach-in button (approx. 1-3 sec.).

Depending on the requirements, the potentiometer can be used for fine-tuning (without

pressing the teach-in button).

Clockwise rotation: Sensing range increased.

Counterclockwise rotation: Sensing range reduced.

The sensing range can also be adjusted using just the potentiometer.

COMMISSIONING 7

8025300 / 2020-11-13 | SICK

Subject to change without notice

9

1...3 sec.

1

2

3

Figure 6: WTB4F, adjustment of the sensing range using a teach-turn adjustment

WTB4FT DoubleLine-xxxxxx3x

Adjustment via teach-in: The sensing range is adjusted by pressing the teach-in button

(approx. 1-3 sec.).

WTB4FT DoubleLine-xxxxxxAx

Sensor with fixed sensing range and no adjustment.

7

COMMISSIONING

10

8025300 / 2020-11-13 | SICK

Subject to change without notice

7.4 Process data structure

Process data structure (Version 1.1)

WTB4FT DoubleLinex-xxxxxxxxAxx:

A00 A70 A71 A72 A73 A75

IO-Link V1.1

Process

data

2 bytes 4 bytes

Byte 0: bits 15... 8

Byte 1: bits 7... 0

Byte 0: bits 31...

24

Byte 1: bits 13...

16

Byte 2: bits 15...

8

Byte 3: bits 7... 0

Bit 0 / Data

type

Q

L1

/ Boolean

Bit 1 / Data

type

Q

L2

/ Boolean Qint.1 /

Boolean

Q

L2

/

Boolean

Qint.1 / Boolean

Bit... /

Descrip‐

tion / Data

type

2 ...15 /

[empty]

2 ...15 /

[time mea‐

surement

value] /

UInt 14

2 … 15 /

[counter

value] /

UInt 14

2 … 15 /

[length /

speed

measure‐

ment] /

SInt14

2 /

Qint.1 /

Boolean

2 … 7 / [empty]

Bit... /

Descrip‐

tion / Data

type

3 … 15 /

[time mea‐

surement

value] /

UInt13

8 … 31 / [carrier

load] / UInt 24

8 Troubleshooting

The Troubleshooting table indicates measures to be taken if the sensor stops working.

Table 7: Troubleshooting

LED indicator/fault pattern Cause Measures

Green LED flashes IO-Link communication None

Switching outputs do not

behave in accordance with

table 6

1. IO-Link communication

2. Change of the configuration

3. Short-circuit

1. None

2. Adjustment of the configura‐

tion

3. Check electrical connections

Yellow LED lights up, no object

in the path of the beam

The sensing range distance is

too large

Reduce the sensing range

Object is in the path of the

beam, yellow LED does not

light up

Distance between the sensor

and the object is too long or

sensing range is set too short

Increase the sensing range

9 Disassembly and disposal

The sensor must be disposed of according to the applicable country-specific regula‐

tions. Efforts should be made during the disposal process to recycle the constituent

materials (particularly precious metals).

COMMISSIONING 7

8025300 / 2020-11-13 | SICK

Subject to change without notice

11

NOTE

Disposal of batteries, electric and electronic devices

•

According to international directives, batteries, accumulators and electrical or

electronic devices must not be disposed of in general waste.

•

The owner is obliged by law to return this devices at the end of their life to the

respective public collection points.

•

WEEE: This symbol on the product, its package or in this document,

indicates that a product is subject to these regulations.

10 Maintenance

SICK sensors are maintenance-free.

We recommend doing the following regularly:

•

Clean the external lens surfaces

•

Check the screw connections and plug-in connections

No modifications may be made to devices.

Subject to change without notice. Specified product properties and technical data are

not written guarantees.

11 Technical specifications

WTB4FT DoubleLine

Recommended sensing range for the best performance 40 mm … 120 mm

Sensing range max. 7 mm … 120 mm (Typ)

1)

Light spot diameter/distance 2 x (2 x 28 mm) (50 mm) (Typ) 2 x (9

x 50 mm) (100 mm) (Typ)

Supply voltage U

B

DC 10 ... 30 V

2)

Ripple ≤ 5 Vss

Output current I

max.

≤ 100 mA

Current consumption 25 mA

Switching frequency 500 Hz

3)

Max. response time 1000 µs

4)

Enclosure rating IP66, IP67

Protection class III

5)

Circuit protection A, B, D

6)

Ambient operating temperature –40 °C ... +60 °C

1)

Object with 90 % remission (based on standard white DIN 5033)

2)

Limit values. U

B

connections reverse-polarity protected. Residual ripple max 5 V

PP

3)

With light / dark ratio 1:1

4)

Signal transit time with resistive load

5)

Reference voltage DC 50 V

6)

A = U

B

-connections reverse polarity protected

B = inputs and output reverse-polarity protected

D = outputs overcurrent and short-circuit protected

10 MAINTENANCE

12

8025300 / 2020-11-13 | SICK

Subject to change without notice

11.1 Dimensional drawings

8

67

4

5

3

1

2

16 (0.63) 12.1 (0.48)

9 (0.35)

Ø 6.8

(0.27)

5.6 (0.22)

Ø 6.2 (0.24)

8 (0.32)

8.1 (0.32)

3.5 (0.14)

37.2 (1.46)

4.7 (0.18)

3.4 (0.13)

6.7 (0.26)

9 (0.35) 8 (0.31)

Figure 7: Dimensional drawing 1, cable

1

Preferred direction of the target

object

2

Center of optical axis, sender

3

Center of optical axis, receiver

4

M3 threaded mounting hole

5

Connection

6

LED indicator green: Supply voltage

active

7

LED indicator yellow: Status of

received light beam

8

Sensing range adjustment

3

1

2

8

67

4

5

16 (0.63) 12.1 (0.48)

9 (0.35)

M8

(0.31)

5.6 (0.22)

Ø 6.2 (0.24)

8 (0.32)

11 (0.43)

3.5 (0.14) 9 (0.35) 8 (0.31)

40.1 (1.58)

7.6 (0.3)

3.4 (0.13)

6.7 (0.26)

Figure 8: Dimensional drawing 2, male con‐

nector

TECHNICAL SPECIFICATIONS 11

8025300 / 2020-11-13 | SICK

Subject to change without notice

13

Page is loading ...

12 Allgemeine Sicherheitshinweise

■

Lesen Sie vor der Inbetriebnahme des Geräts die Betriebsanleitung.

■

Der Anschluss, die Montage und die Konfiguration des Geräts dürfen nur

von geschultem Fachpersonal vorgenommen werden.

■

2006/42/EC

NO

SAFETY

Bei diesem Gerät handelt es sich um kein sicherheitsgerichtetes Bauteil im

Sinne der EU-Maschinenrichtlinie.

■

Bei der Inbetriebnahme ist das Gerät ausreichend vor Feuchtigkeit, Ver‐

schmutzung und UV-Strahlung (Sonnenlicht) zu schützen.

■

Die vorliegende Betriebsanleitung enthält Informationen, die während des Lebens‐

zyklus der Lichtschranke benötigt werden.

13 Hinweise zur UL Zulassung

The device shall be supplied from an isolating transformer having a secondary overcur‐

rent protective device that complies with UL 248 to be installed in the field rated either:

a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or

b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).

Alternatively, they can be supplied from a Class 2 power supply.

UL Environmental Rating: Enclosure type 1

14 Bestimmungsgemäße Verwendung

Die WTB4FT DoubleLine ist ein optoelektronischer Reflexions-Lichttaster mit Hinter‐

grundausblendung (im Folgenden Sensor genannt) und wird zum optischen, berüh‐

rungslosen Erfassen von Sachen, Tieren und Personen eingesetzt. Bei jeder anderen

Verwendung und bei Veränderungen am Produkt verfällt jeglicher Gewährleistungsan‐

spruch gegenüber der SICK AG.

15 Bedien- und Anzeigeelemente

Reflexionslichttaster mit Hintergrundausblendung.

Tabelle 8: Bedien- und Anzeigeelemente

WTB4

FT

Dou‐

ble‐

Line

-xxxxxx20Axx -xxxxxx30Zxx -xxxxxx10Zxx -xxxxxxA0Zxx

1

3

2

4

34

2

34

1

BluePilot blau: Schaltabstandsanzeige

2

Drück-Dreh-Element / Potentiometer / Teach-Taste: Einstellung des Schaltabstands

ALLGEMEINE SICHERHEITSHINWEISE 12

8025300 / 2020-11-13 | SICK

Subject to change without notice

17

Page is loading ...

Tabelle 10: DC

WTx4Fx- xx16xxxxA00 xx16xxxxA01-

A99

xx161 xx162 xx16A xx13N xx16x

1 = BN + (L+)

2 = WH MF

3 = BU - (M)

4 = BK Q

L1

/C

Default: MF

Q

Q no function no function www.sick.com

8022709

Default:

Q

L1

/C

Q

www.sick.com

8022709

Tabelle 11: DC

WTx4Fx- xx11xxx0Zxx

xx112 xx111 xx312 xx311

1 = BN + (L+)

2 = WH

Q

Q no function

3 = BU - (M)

4 = BK Q

Q

Tabelle 12: DC

WTx4Fx- xx31xxx0Zxx

xx311 xx312

1 = BN + (L+)

3 = BU - (M)

4 = BK Q

Q

Tabelle 13: Push / Pull

Q

push-pull

(≤ 100 mA)

+ (L+)

Q

‒ (M)

+ (L+)

Q

‒ (M)

ELEKTRISCHE INSTALLATION 17

8025300 / 2020-11-13 | SICK

Subject to change without notice

19

Page is loading ...

Tableau 16: raccordement électrique

x4 x2 xH x1 xG

1 = BN

2 = WH

3 = BU

4 = BK

1

2

4 3

2

1

4

3

0,14 mm

2

AWG26

1

4

3

0,14 mm

2

AWG26

Tableau 17: DC

WTx4Fx- xx16xxxxA00 xx16xxxxA01-

A99

xx161 xx162 xx16A xx13N xx16x

1 = BN + (L+)

2 = WH MF

3 = BU - (M)

4 = BK Q

L1

/C

Default: MF

Q

Q no function no function www.sick.com

8022709

Default:

Q

L1

/C

Q

www.sick.com

8022709

Tableau 18: DC

WTx4Fx- xx11xxx0Zxx

xx112 xx111 xx312 xx311

1 = BN + (L+)

2 = WH

Q

Q no function

3 = BU - (M)

4 = BK Q

Q

Tableau 19: DC

WTx4Fx- xx31xxx0Zxx

xx311 xx312

1 = BN + (L+)

3 = BU - (M)

4 = BK Q

Q

Tableau 20: Push / Pull

INSTALLATION ÉLECTRIQUE

28

8025300 / 2020-11-13 | SICK

Subject to change without notice

31

Page is loading ...

0

20

(0.79)

10

(0.39)

40

(1.57)

30

(1.18)

50

(1.97)

80

(3.15)

100

(3.94)

20

(0.79)

40

(1.57)

60

(2.36)

0

y

x

y

x

Minimum distance in mm (y) between the set sensing

range and white background (90 % remission)

Example:

Safe suppression of the background

White background (90 %)

Black object (6 % remission)

Set sensing range x = 80 mm

Needed minimum distance to white

background y = 5 mm

Distance in mm (inch)

Recommended sensing range for

the best performance

60

(2.36)

120

(4.72)

1

6%/90%

90%/90%

33

2

18%/90%

Illustration 18: Caractéristique

0

8

15

8

15

7 120

Distance in mm (inch)

112

117

1

2

3

15

80

(3.15)

100

(3.94)

20

(0.79)

40

(1.57)

60

(2.36)

120

(4.72)

D

C

A B

BluePilot

E

F

Illustration 19: graphique à barres

A Distance de commutation min. en mm

B Distance de commutation max. en mm

C Zone de visualisation

D Plage de réglage seuil de commutation

pour l’élimination de premier plan

E Indication de la distance de commuta‐

tion

F Bouton poussoir rotatif

0

Distance in mm (inch)

Dimensions in mm (inch)

4

(0.16)

6

(0.24)

–6

(–0.24)

–4

(–0.16)

0

2

(0.08)

–2

(–0.08)

10

(0.39)

220

(8.66)

80

(3.15)

40

(1.57)

120

(4.72)

160

(6.30)

200

(7.87)

240

(9.45)

130

(5.12)

Recommended sensing range for

the best performance

Illustration 20: Taille du spot lumineux

0

Distance in mm (inch)

Dimensions in mm (inch)

20

(0.79)

60

(2.36)

40

(1.57)

80

(3.15)

100

(3.94)

120

(4.72)

12

(0.47)

15

(0.59)

–3

(–0.12)

0

6

(0.24)

9

(0.35)

3

(0.12)

10

(0.39)

120

(4.72)

50

(1.97)

Apex angle 4°

Recommended sensing range for

the best performance

Illustration 21: Taille du spot lumineux

29.3

Réglage

Réglage distance de commutation

WTB4FT DoubleLine-xxxxxx1xAxx

Réglage via potentiomètre :

rotation vers la droite : augmentation de la distance de commutation.

Rotation vers la gauche : réduction de la distance de commutation.

WTB4FT DoubleLine-xxxxxx2xAxx

Appuyer sur le bouton d’apprentissage (pendant environ 1 à 3 secondes) pour régler la

distance de commutation. Selon les exigences, il est possible de procéder à un réglage

fin avec le potentiomètre (sans appuyer sur le bouton d’apprentissage).

Rotation vers la droite : augmentation de la distance de commutation.

Rotation vers la gauche : réduction de la distance de commutation.

La distance de commutation peut aussi être sélectionnée uniquement au moyen du

potentiomètre.

MISE EN SERVICE 29

8025300 / 2020-11-13 | SICK

Subject to change without notice

33

Page is loading ...

M A N U A L D E I N S T R U Ç Õ E S

WTB4FT DoubleLine

Barreira de luz miniatura

de

en

es

fr

it

ja

pt

ru

zh

Page is loading ...

34 Instruções gerais de segurança

■

Leia o Manual de instruções antes de colocar o dispositivo em operação.

■

A conexão, a montagem e a configuração do dispositivo só podem ser

feitas por pessoal qualificado.

■

2006/42/EC

NO

SAFETY

Este dispositivo não é um componente orientado à segurança nos moldes

da Diretriz de Máquinas da UE.

■

Na colocação em operação, o dispositivo deve ser protegido de modo

satisfatório contra umidade, sujeira e radiação UV (luz solar).

■

O presente manual de instruções contém informações necessárias para toda a

vida útil da barreira de luz de reflexão.

35 Indicações sobre a homologação UL

The device shall be supplied from an isolating transformer having a secondary overcur‐

rent protective device that complies with UL 248 to be installed in the field rated either:

a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or

b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).

Alternatively, they can be supplied from a Class 2 power supply.

UL Environmental Rating: Enclosure type 1

36 Uso pretendido

O WTB4FT DoubleLine é um sensor de proximidade de supressão do fundo fotoelétrico

opto-eletrônico (referido como “sensor” daqui em diante) para detecção óptica sem

contato de objetos, animais e pessoas. Se o produto for utilizado para qualquer outro

propósito ou modificado de qualquer maneira, qualquer reivindicação de garantia con‐

tra a SICK AG se tornará nula.

37 Elementos de comando e indicação

Sensor fotoelétrico de reflexão com supressão do fundo

Tabela 22: Elementos de comando e indicação

WTB4

FT

Dou‐

ble‐

Line

-xxxxxx20Axx -xxxxxx30Zxx -xxxxxx10Zxx -xxxxxxA0Zxx

1

3

2

4

34

2

34

1

BluePilot azul: indicação da distância de comutação

2

Elemento de pressão e giro/potenciômetro/tecla teach: ajuste da distância de comutação

INSTRUÇÕES GERAIS DE SEGURANÇA 34

8025300 / 2020-11-13 | SICK

Subject to change without notice

41

Page is loading ...

Tabela 23: conexão elétrica

x4 x2 xH x1 xG

1 = BN

2 = WH

3 = BU

4 = BK

1

2

4 3

2

1

4

3

0,14 mm

2

AWG26

1

4

3

0,14 mm

2

AWG26

Tabela 24: DC

WTx4Fx- xx16xxxxA00 xx16xxxxA01-

-A99

xx161 xx162 xx16A xx13N xx16x

1 = BN + (L+)

2 = WH MF

3 = BU - (M)

4 = BK Q

L1

/C

Default: MF

Q

Q no function no function www.sick.com

8022709

Default:

Q

L1

/C

Q

www.sick.com

8022709

Tabela 25: DC

WTx4Fx- xx11xxx0Zxx

xx112 xx111 xx312 xx311

1 = BN + (L+)

2 = WH

Q

Q no function

3 = BU - (M)

4 = BK Q

Q

Tabela 26: DC

WTx4Fx- xx31xxx0Zxx

xx311 xx312

1 = BN + (L+)

3 = BU - (M)

4 = BK Q

Q

Tabela 27: Push / Pull

INSTALAÇÃO ELÉTRICA

39

8025300 / 2020-11-13 | SICK

Subject to change without notice

43

Page is loading ...

SICK WTB4FT DoubleLine Operating instructions

SICK WTB4FT DoubleLine Operating instructions

in other languages

Related papers

Other documents