3M Removable Mounting Putty, Multiple Sizes Operating instructions

3M
Brand
3M
Model
Removable Mounting Putty, Multiple Sizes
Type
Operating instructions

This manual is also suitable for

3M, Scotch and the Plaid Design are trademarks of 3M.
Scotchbrand.com/Mounting
Scotch
®
Brand Tapes
Great ideas that stick
Removable
Mounting Putty
• Apply pressure and it sticks
• Mount artwork, photos, papers and other lightweight
items
• Works on most porous and non-porous surfaces*
including cinder block
Preparing:
The surfaces must be dry and clean. As needed, knead
one or several pieces of putty, approximately ” x ”,
until soft.
Applying:
Adhere the putty to the item to be mounted.
Mounting:
Press the item rmly onto the mounting surface, such as
a wall or a container.
Removal: Remove the putty carefully by peeling it from the
surfaces. Remove putty residue by dabbing the surface with a piece of putty.
Storage: Keep putty in blister or an airtight bag. Conforms to ASTM D-4236. Additional
Product Safety and Health Information Source: Material Safety Data Sheet (18-4680-7)
*
Not recommended for use on wallpaper, delicate surfaces or walls painted with at
paint. May stain certain surfaces.
For questions, ideas and special oers go to
Scotchbrand.com/Mounting
Use instead
of push pins
  • Page 1 1

3M Removable Mounting Putty, Multiple Sizes Operating instructions

3M
Brand
3M
Model
Removable Mounting Putty, Multiple Sizes
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents