True Manufacturing TA1RRI-1S Datasheet

Brand: True Manufacturing

Model: TA1RRI-1S

Type: Datasheet

True Manufacturing TA1RRI-1S is a roll-in refrigerator designed to meet the needs of consultants. It features a 300 series stainless steel exterior and a white vinyl coated aluminum interior. The TA1RRI-1S has a digital exterior temperature monitor with manual defogger control, and the doors are reversible for easy access. The refrigeration system is factory balanced using CFC-free 134A refrigerant, and the unit is completely pre-wired at the factory. The TA1RRI-1S is a great choice for those who need a reliable and efficient roll-in refrigerator.

Roll-In Refrigerator

❒ TA1RRI-1S

YEAR

COMPRESSOR

Exceptions:

CABINET CONSTRUCTION:

• Exterior - 300 series stainless steel front, shroud, top, bottom, back and

doors. 400 series stainless steel exterior sides.

• Interior - NSF approved white vinyl coated aluminum sides and back. 300

series stainless floor and door liner.

• Digital exterior temperature monitor with manual defogger control, large

LED display for quick and easy temperature identification.

DOORS:

• 300 series stainless steel exterior with 300 series stainless steel interior

door liner. Door gaskets of one piece construction, and removable without

tools for ease in cleaning. Doors are reversible.

• Reinforced, heavy duty stainless steel interior floor.

• Heavy duty hinges. The face of each door fitted with a 12" long recessed

handle with interlock. Handles are foamed-in-place to insure permanent

attachment (lifetime guaranteed).

• Heavy gauge stainless steel ramp standard for each door.

INSULATION:

• Entire cabinet structure and doors insulated using foamed-in-place CFC

free polyurethane foam.

INTERIOR:

• Stainless steel bumper to prevent cart from damaging interior walls.

LIGHTING:

• Incandescent interior lighting. Light(s) activated by interior, manual

on/off switch.

REFRIGERATION SYSTEM:

• Refrigeration system factory balanced using CFC free 134A refrigerant.

• Top mounted condensing unit.

• Factory pre-engineered capillary tube system with oversized condenser

and evaporator to reduce product pull down time and to consistently

maintain food safe 33° to 38°F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the

potential of corrosion.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to

a dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.

SPECIFICATIONS / FEATURES

TRUE introduces its latest offering designed specifically

to meet the needs of consultants.

TA1RRI-1S

Printed in

U.S.A.

10/03

APPROVALS:

TA Series (Roll-In Refrigerator)

Specifications subject to change without notice.

TRUE FOOD SERVICE EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366

(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

AIA #

SIS #

Project Name:

Location:

Item #: Qty:

Model #:

115/60/1

NEMA-5-15R

Remote cabinets available 14% off list

(condensing units supplied by others).

Consult factory technical service dept. for BTU information.

C US

Specification Series

/8"

TA-Series: Roll-In Refrigerator

• Oversized and balanced, environmentally

friendly (134A) refrigeration system - holds

food safe 33°F to 38°F.

• Exterior - 300 series stainless steel fronts,

backs, top, bottom and doors. Stainless

steel ends.

• Interior - attractive, NSF approved, white

vinyl coated aluminum sides and back.

300 series stainless floor and door liner.

• TA1RRI-1S accepts roll-in rack (inboard

castor) with maximum dimensions of

27”W x 29”D x 66”H.

(supplied by others).

• Exterior mounted digital electronic

thermometer with manual defogger.

• Energy saver switch.

• Heavy gauge reversible doors. Three cam-

lift hinges per door - lifetime guaranteed.

Designed for easy product access with a

full 180 degree open capability and stay

open feature at 120 degrees.

• Reversible wiper gaskets for positive seal.

• Recessed handles (lifetime guaranteed).

• Top mounted unit positioned out of food

zone to maximize storage capacity.

• Glass condensate pan to prevent

electrolysis.

• Hot gas condensate for energy efficiency.

• Heavy gauge stainless steel ramp standard

for each door.

• Incandescent interior lighting.

Standard Features____________________________________________________________________________________________

TRUE FOOD SERVICE EQUIPMENT

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Printed in U.S.A.

Rough-In Data

/2"

L - 89 cm

D - 88 cm

H - 213 cm

Door

Swing - 83 cm

/8"

/2"

35"

/2"

32"

Specifications subject to change without notice.

Dimensions Cord

Capacity (inches) NEMA Length Crated

Model Doors (Cu. Ft) L D H HP Volts PH Amps Config. (feet) Weight

TA1RRI-1S 1 37 35 34 1/2 83 3/4 1/3 115 1 8.5 5-15 9 400

YEAR

COMPRESSOR

Model Front Right Plan 3D

TA1RRI-1S TFQY51E TFQY51S TFQY51P TFQX513

• Magnetic door gaskets.

• Epoxy coated evaporator.

• Interior bumpers protect cabinet.

• Self-contained system.

• 1 year parts & labor warranty (USA).

• 5 year compressor warranty.

❒ Export units available - consult factory.

❒ Metal handle (solid doors only).

❒ Electronic temperature control.

❒ Correctional facility options - consult factory.

❒ Remote cabinets available (contact factory

technical services for BTU information).

Optional Accessories ______________

/2"

/4"

C US

KCL

True Manufacturing TA1RRI-1S Datasheet

True Manufacturing TA1RRI-1S Datasheet

True Manufacturing TA1RRI-1S Datasheet

Related papers