Peavey Dyna-Bass Owner's manual

Type
Owner's manual

Peavey Dyna-Bass is an electric bass guitar with a solid body made of poplar and a neck made of rock maple. The fingerboard is made of rosewood and has a radius of 8 inches. The scale length is 34 inches and there are 21 frets. The headstock is tilted at a 6-degree angle and has a Graphon top nut. The machine heads are "Mini" bass machine heads with reduced mass. The Dyna-Bass has two internally active humbucking pickups and an on-board active 3-band EQ with variable mid-notch controls. The output is low impedance and requires a 9-volt battery.

Peavey Dyna-Bass is an electric bass guitar with a solid body made of poplar and a neck made of rock maple. The fingerboard is made of rosewood and has a radius of 8 inches. The scale length is 34 inches and there are 21 frets. The headstock is tilted at a 6-degree angle and has a Graphon top nut. The machine heads are "Mini" bass machine heads with reduced mass. The Dyna-Bass has two internally active humbucking pickups and an on-board active 3-band EQ with variable mid-notch controls. The output is low impedance and requires a 9-volt battery.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Peavey Dyna-Bass Owner's manual

Type
Owner's manual

Peavey Dyna-Bass is an electric bass guitar with a solid body made of poplar and a neck made of rock maple. The fingerboard is made of rosewood and has a radius of 8 inches. The scale length is 34 inches and there are 21 frets. The headstock is tilted at a 6-degree angle and has a Graphon top nut. The machine heads are "Mini" bass machine heads with reduced mass. The Dyna-Bass has two internally active humbucking pickups and an on-board active 3-band EQ with variable mid-notch controls. The output is low impedance and requires a 9-volt battery.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI