Lightolier TSL User manual

  • Hello! I am an AI chatbot trained to assist you with the Lightolier TSL User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
UNDER SHELF LUMINAIRE TSL SERIES
Page 1 of 2 12-1/4", 21-1/4", 24-1/2", 33-1/2", 42-1/2" LENGTHS, ONE OR TWO LAMPS, T5 PREHEAT
MOUNTING METHODS DIMENSIONS All K.O.’s are 7/8” unless otherwise noted.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 SECTION 3A/Folio H150-09
Features
1-1/8" shallow depth.
Five nominal lengths.
Optional grounded convenience outlet.
Baked white polyester enamel.
On/off switch supplied standard with
supply pack.
12-3/16" (310mm)
21-3/16" (538mm)
24-7/16" (621mm)
33-7/16" (849mm)
42-7/16" (107mm)
1-1/8"
(29mm)
1-1/8"
(29mm)
5"
(127mm)
9/32" Mounting Holes
5" (127mm)
Attractive, unobtrusive lighting
UNDER SHELF LUMINAIRE TSL SERIES
Page 2 of 2 12-1/4", 21-1/4", 24-1/2", 33-1/2", 42-1/2" LENGTHS, ONE OR TWO LAMPS, T5 PREHEAT
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 SECTION 3A/Folio H150-09
Job Information Type:
OPTIONS & ACCESSORIES
INLINE FUSING: SUFFIX: GLR.
GROUNDED CONVENIENCE OUTLET: SUFFIX: CO.
SPECIFICATIONS
MATERIALS: Chassis parts are die-formed cold rolled steel.
LENS: Ribbed, white opal acrylic.
FINISH: Cavity—white baked enamel, minimum 85% reflectance.
Phosphate undercoating. Chassis exterior—white baked enamel.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB.
If K.O. is within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W. Listed by Underwriters Laboratories.
ORDERING INFORMATION
Explanation of Catalog Number. Example: TSL0018W BPR
TSL
TASKMASTER I:
Under Shelf
Luminaire
LAMP/FIXTURE
LENGTH/WATTS:
0018=(nominal 12-1/4")
1-8PH lamp
0013=(nominal 21-1/4")
1-13PH lamp
0028=(nominal 24-1/2")
2-8PH lamp
1813=(nominal 33-1/2")
1-8PH/1-13PH
lamps
0213=(nominal 42-1/2")
2-13PH lamp
W
FINISH:
W=White
BPR
BULK PACK ROCKER:
On/off switch supply pack.
Standard with each unit.
OPTIONS:
Add appropriate suf-
fix to catalog no, ie:
(GLR)
For electronic ballast, substitute TSLP for TSL, ie: TSLP0018W BPR.
/