Lightolier EZ-Connect Cables "D" Series allow for quick and easy field installation by plugging ballast leads into “Poke Home” connectors, eliminating the need for wirenuts. These cables snap into standard 1/2" knockouts and add a maximum of 7/8" to fixture height. Available in 1, 2, or 3 circuits, EZ-Connect cables are suitable for use in return air spaces above suspended ceilings and are rated for 20 amp 120 and 277-volt lighting circuits.
Lightolier EZ-Connect Cables "D" Series allow for quick and easy field installation by plugging ballast leads into “Poke Home” connectors, eliminating the need for wirenuts. These cables snap into standard 1/2" knockouts and add a maximum of 7/8" to fixture height. Available in 1, 2, or 3 circuits, EZ-Connect cables are suitable for use in return air spaces above suspended ceilings and are rated for 20 amp 120 and 277-volt lighting circuits.
Lightolier EZ-Connect Cables "D" Series allow for quick and easy field installation by plugging ballast leads into “Poke Home” connectors, eliminating the need for wirenuts. These cables snap into standard 1/2" knockouts and add a maximum of 7/8" to fixture height. Available in 1, 2, or 3 circuits, EZ-Connect cables are suitable for use in return air spaces above suspended ceilings and are rated for 20 amp 120 and 277-volt lighting circuits.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI