This Quick Reference Guide provides all the necessary information to install the Savant
Smart Host.
IMPORTANT! Before using the Savant Smart Host for the first time, update
to the latest version of Runtime OS.
Follow the steps outlined in the Software Installation and Upgrade
Deployment Guide for the release being installed.
NOTE: The Savant Smart Host is a custom Linux host designed specifically to support
running a Savant® Runtime OS. Use of other Linux devices is not supported by
Savant.
Box Contents
(1) HST-SMRTD or HST-SMRTDR (Redundant Host)
(1) Installation Kit:
(1) 19V DC 65W 50/60 Hz Power Supply
(1) 6 ft Power Cord
(1) Quick Reference Guide
Required System Components
The following components are required to use with Savant Smart Host Linux Host.
Description
Model Number
Master Smart Host License
Refer to the Savant Runtime OS Licensing
- Application Note - 009-0852-02 for details
on Smart Host licenses.
Ethernet Network
Enterprise-grade network deployment.
See Network Connection Requirements for
more information.
Optional Accessories
Description
Model Number
1U Rack mount
RCK-4000-xx
Specifications
Environmental
Environmental
Temperature
0°C to +40°C
Humidity
10% to 90% Relative Humidity (non-condensing)
Cooling
10 CFM
Maximum BTUs
61.5 btu/hr
Dimensions and Weight
Dimensions and Weight
Height
1.55in (39.0mm)
Width
4.59in (116.6mm)
Depth
4.41in (112.0mm)
Weight (Shipping)
6 lb
Rack Space
1U (2 chassis per 1 rack unit)
Power
Power
Power Supply
19V DC 65W 50/60 Hz
Compliance
Compliance
Safety and Emissions
FCC Part 15 | C-Tick | CE Mark
RoHS
Compliant
Rear Panel
1 2 3 4 5
1
Power Supply
Connection to 19V DC power supply (Included).
2
USB 2.0
Ports (x2)
Connection for USB devices such as keyboards/mouse or
USB memory stick.
3
Cooling Vents
Provides cooling for the internal components.
WARNING! DO NOT block vents in order to maintain proper
cooling.
4
HDMI Outputs
(x2)
19-pin Type A HDMI female; digital video/audio outputs; signal
types HDMI, DVI—compatible with DVI/D (requires DVI to
HDMI adapter, not included), allowing DVI/D source signal to
be passed to displays. Limited to 185 MHz pixel clock.
5
Network LAN
RJ-45 Ethernet 10/100/1000 base-T, auto-negotiating port
with link/activity LEDs.
Front Panel
1
USB
2.0 Port
Connection for USB devices such as wireless keyboards/mouse, or USB
memory stick.
Top Panel
1
Power Button
Use to power On or Off the HST. Icon glows Blue when
powered on.
2
HDD LED
Solid or Flashes indicating SSD activity. Will increase to solid
with more activity.
Savant Smart Host
(HST-SMRTD/HST-SMRTDR)
Quick Reference Guide
Scan this QR code for
additional product
information.
032814
1
of
2
009-1126-01
009-1126-01
Savant Confidential and Proprietary
HST-SMRTD / HST-SMRTDR
HST-SMRTD / HST-SMRTDR
HST-SMRTD / HST-SMRTDR
HST-SMRTD / HST-SMRTDR
HST-SMRTD / HST-SMRTDR
HST-SMRTD / HST-SMRTDR
Power Management Recommendations
Savant recommends a pure sine wave uninterruptible power supply (UPS) with the ability
to shut down the HST Host Controllers before the battery runs out of power. Never
remove power from the HST Host Controller before shutting it down.
Network Connection Requirements
Savant requires the use of business class/commercial grade network equipment throughout
the network to ensure the reliability of communication between devices. These higher
quality components also allow for more accurate troubleshooting when needed.
Connect all Savant devices to the same local area network (LAN), virtual local area network
(VLAN), or subnet as the host to ensure they can be located via the Bonjour® protocol. Devices
connected to separate LANs, VLANs, or subnets will not communicate as the Bonjour protocol
cannot cross to other networks.
Network Configuration
To ensure that the IP address of the Savant Smart Host will not change due to a power
outage, a static IP address or DHCP reservation should be configured. Savant
recommends using DHCP reservation within the router. By using this method, static IPs
for all devices can be managed from a single UI avoiding the need to access devices
individually.
DHCP Reservation
Setting DHCP reservation varies from router to router. Refer to the documentation for the
router on how to configure DHCP reservation.
Retrieving UID and IP Address
Follow the steps outlined in the HST-SMRTD-00 - Savant Smart Host: Deployment Guide
- 009-1131-00 for details on retrieving the UID and IP address.
Additional Documentation
Additional documentation for the Smart Host is available at dealers.savantsystems.com.
•
HST-SMRTD-00 - Savant Smart Host: Deployment Guide - 009-1131-00 for
configuring the HST-SMRTD for use in a Savant System.
•
HST-SMRTD-00 - Savant Smart Host - Technical Specifications - 009-1137-00
Savant Smart Host Quick Reference Guide
Savant Smart Host Quick Reference Guide
Savant Smart Host Quick Reference Guide
2
of
2
Copyright © 2014 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.
/