2-Bag Laundry Sorter
Model No. WEB275
ASSEMBLY INSTRUCTIONS
Tel 1.800.323.5565
Fax 1.310.533.3899
Monday through Friday 8:30AM-4:30PM (PST)
Seville Classics, Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
Torrance, CA 90501 USA
www.sevilleclassics.com
READ AND SAVE THESE INSTRUCTIONS ©2015 Seville Classics, Inc.
Additional LAUNDRY BAGS WEB127 available for
purchase at www.SevilleClassics.com
Weight Capacity
10lbs per Bag / 20lbs per Sorter
Care Instructions
Remove handle bars and wash fabric laundry bags in cold
water with non-chlorine bleach as needed. Lay flat to dry.
Please make sure you have all parts before assembling.
2 pcs
4 pcs 2 pcs
2 pcs
Top Frames
Frame Poles Bottom Poles
Laundry Bags
4 pcs 4 pcs
12 pcs 1 pc
Handle Bars
Support Bars
Screws
Allen Wrench
1 pc 2 pcs 2 pcs
Wrench Wheels
Locking Wheels
Assembly Instructions:
Step 1:
A B C D
E F G H
I
J
K
8 pcs
Spacers
L
Step 2:
Step 3:
Slide Handle Bar (E) into Canvas Bag (D).
Step 4:
Place the Laundry Bags (D+E) on the top
Support Bars (F).
G
Note: Make sure both Locking Wheels (K)
are on either the front or back side.
With Spacers (L) in between Support Bars (F)
and frames from Step 1, use Screws (G) to
secure with Allen Wrench (H).
Attach Wheels (K and J) to Frame Poles (B)
using the provided Wrench (I).
With Allen Wrench (H), attach Bottom Pole
(C) to the Frame Poles (B) using Screws (G).
Place Top Frame (A) onto Frame Poles (B).
Repeat this step for the second side of
frame.
/
