Haier 29FA11-AM Owner's manual

Brand: Haier

Model: 29FA11-AM

Category: CRT TVs

Type: Owner's manual

This manual is also suitable for

COLOUR TV RECEIVER

OWNER'S MANUAL

Please read this manual carefully

before operating the unit, and keep

it for future reference.

The Owner's Manual for the Follow Models:

21FA12-AM,29FA12-AM,29FA11-AM

¼¼ÊõÐÔ²Ù×÷

Power on and power off

Viewing TV programs

Program swap and auto program scan

Tuning

Automatic search

Manual search

FINE TUNE

Program Skip

Convenient picture control functions

Multiple picture modes

How to set the PICTURE BOOST

How to set the BLACK STRETCH

Time functions

Clock setting and on/off timer

REMIND PROG function

Setting the other function

How to start screen saver

AVL function

Channel exchange

Calendar function

Others

Connecting additional equipments

Troubleshooting

Specifications

»ù±¾²Ù×÷

ÆÁÄ»ÏÔÊ¾²Ëµ¥¼ò½é

CONTENTS

Basic Operation

Ä¿Â¼

Before Operation

²Ù×÷Ö®Ç°

Warning and Cautions

Installation

Antenna connection

Preparation for the remote control

Position of keys and plug-ins

Front and side panel

Back panel

Using the remote control

Warning and Cautions

1. When you clean the TV set, please

pull out the power plug from AC outlet.

Don't clean the cabinet and the

screen with benzene, petrol and other

chemicals.

4. To prevent the TV set from firing

and electric shock, don't expose the

TV set to rain or moisture.

2. In order to prolong the using life of

the TV set, please place it on a

ventilated place.

5. Don't open the back cover,

otherwise it is possible to damage the

components in the TV set and harm

you.

3. Don't place the

TV set in the

sunshine or near

heat source.

6. When the TV set isn't going to be

used for long time or it is in thunder

and lightening, please pull out the

plug from AC outlet and the antenna

plug from the cover of the TV set.

Explanation on the display tube

In general, it is not needed to clean the tube surface. However, necessary,

it's surface can be cleaned with a dry cotton cloth after cutting off the power.

Don't use any cleanser. If using hard cloth, the tube surface will be damaged.

Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV

system or an outdoor antenna .In different places, the suitable antenna type and position

are different.

ÌìÏßµÄ°²×°¡¡

Ò£¿ØÆ÷µÄ×¼±¸

Battery installation

Remove the batteries cover.

Insert two size AAA batteries matching

the +/-polarities of the battery to

the +/- marks inside the battery

compartment.

Tips for remote operation

The battery life should be about one year

under normal use.

If the remote control will not be used for

a long period of time or when the batteries

are worn out, remove the batteries to

prevent leakage.

Do not throw the batteries into fire. Dispose

of used batteries in the specified manner.

Do not drop, dampen or disassemble the

remote control.

Note

* It is recommended that you'd better use 75 coaxial cable to remove the

disturbance caused by airwave.

* Don't bind antenna cable and electric wire together.

twin-lead cable

coaxial cable

Antenna adapter

Plug

(additional purchase)

Mixer

additional

purchase

AC power socket

Antenna input

standard

coaxial type

Antenna connection

Preparation for the remote control

Installation

Position of Keys and Plug-ins

VIDEO

AUDIO-L

AUDIO-R

Front and side panel

S-VIDEO

VIDEO

OU T

AU DIO

1.TV/AV :TV/AV/SVHS/DVD selection

2.VOL-:Decrease sound

3.VOL+:Increase sound

4.CH-:Select next lower channel

5.CH+:Select next higher channel

6.Menu:Access/Exit main menu

7.Power Indicator

8.Sensor Windows

9.Power:Power on/off

1. S-VIDEO Input

2.VIDEO/AUDIO Input

3.YUV-DVD component Input

4.VIDEO/AUDIO Output

5.Antena Input

Side

Front

Back panel

TV/AV

L-

VOL+

CH- CH+

A11:

A12:

TUNE

TV/AV

FUNCTION

P.STD

SCAN

TIME

CH+

CH-

VOL+

VOL-

SWAP

PICTURE

EXIT

Using the Remote Control

Buttons and Descriptions

TV and AV Exchange Button

To exchange between TV and

other available video inputs

Mute Button

Press to conceal the sound of programs.

Picture menu button

Direct-digit Choosing Button

Directly select channel numbers

Menu Select/ Adjust Button

Use this button to adjust the menu,

the volume and the channels, as well

as to control the game.

Program Scan Button

Picture Mode Select Button

There are standard,Rich,User,

listen,soft five modes of picture.

Function menu button

Time menu button

Exit button

Digit Select Button

Change the channel position number

between one digit, two-digit and three

-digit.

Swap Button

Tune menu button

Screen Display Button

DC standby button

Remote Control

MUTE

POWER

CALL

In the following, they are the methods on how to power on/off the TV set with the

switches on the TV and on the remote control.

2. If the TV is in the state of standby,pressthe

POWER button on the remote control,Direct-digit

button or CH+/- button .

1. Please press the power switch to switch on AC

power supply and the power indicator will light.

Note

1.When you don't operate the TV set with a remote

control,you can turn on it directly through pressing

the +/- buttons on the TV set.

2.If you want to exchange to standby status,

please press down the POWER button on the

remote control.

3.If you want to fully switch off the power supply for

the TV set, please press the power switch

button on the TV set.

Auto switch-off function

When the "Back" function is on, if an empty channel is selected or

the TV programs are ended for the day, the power will be switched

off 5 minutes later automatically. If the "OFF TIME" is on, it will be

switched off according to the presetting time. The auto power off

function does not work under video input or when the background is

off.

Power on/ off the TV set

POWERPOWER

½ÓÍ¨/¹Ø±ÕµçÔ´

Power On and Power Off

Viewing TV Programs

Direct-digit choosing button

How to select the TV program

If the colour of a channel is abnormal

Select the desired sound.

Press the VOL+/- button to adjust the volume level.

Use the direct-digit choosing button

2. Using the CH+/- buttons

Press CH+ to increase the channel position

number.

Press CH- to decrease the channel position

number.

Press the button from 0-9 to select a one digit

channel.

If you want to select a two-digit channel, press

the Digit Select button and change it into two-

digit mode, then press the number of the

channel.

If you want to select a three-digit channel,

press the Digit Select button and change it into

three-digits mode, then press the number of the

channel.

The settings of the colour system may be

wrong. Press the TUNE button and setting

menu shown on the right will display on the

screen.

If picture colour is abnormal

Use the CH+/- buttons to select

then the VOL-/+ buttons to change between Auto,

. Press the EXIT button

to save the setting.

COLOR SYSTEM

PAL, NTSC and NTSC443

The channels amount to 218 .

Viewing TV programs

CH+

CH-

VOL+

VOL-

CH+

CH-

VOL+

VOL-

TUNING

COLOR SYSTEM

BAND

SKIP OFF

PROG NO

FINE TUNE

AUTO SEARCH

TUNING

COLOR SYSTEM

BAND

SKIP OFF

PROG NO

FINE TUNE

AUTO SEARCH

Swap function enables quick swap to the last watched program.

Auto scan function enables automatic successive scanning of all the programs

in memory with (each channel will last about 2 seconds)."OFF" skip status

Program swap

Suppose the channel number you used just

now is 8 and the channel number you are

using is 18 (as shown in the figure).

2.If you want to return to the last watched

program channel 8, you can simply press the

SWAP button.

3.If you want to return to the last watched

program channel 8, you can simply press the

SWAP button. In one word ,using the Program swap

function ,we can choose channels among the present channel and

four channels we last watched conveniently.

Auto program scan

1.If you want to select a desirable program, you

may scan all the TV programs in memory. You

can simply press the SCAN button to do this.

The programs will appear one after another

from beginning to end (each channel number

will last about 2 seconds).

2 If you want to stop the function during auto

scanning, simply press the SCAN button again.

Swap

Program swap and auto program scan

Viewing TV Programs(continued)

There are three ways of searching: auto search, search and fine tune.

You may operate it either on the TV or on the remote control. Here is mainly about

the remote control.

Automatic search

2. Press the CH+/- buttons to select “AUTO

SEARCH".

3. Press the VOL+ button to ensure automatic

search function operates. All channels now playing

program will be automatically preset in order .

, the first program number

will display on the screen.

After

the search has finished

After searching

Press CH+/- button to check the channels.

If the color is abnormal in a certain channel,

it may be the color system has not been set

properly, so you should adjust it to the proper

system (Reference to page 6).

If you want to stop the search, just press MENU

button.

The order of the automatic search is due to the

frequency of the program, generally speaking, it is

used only at the first time you search the program,

and once the order of the program has been

confirmed, you don't have to use this function,

otherwise the order of the program will be

changed.

Press the TUNE menu button ,and the TUNING

menu shown on the right display on the screen.

Automatic search

CH+

CH-

VOL+VOL-

CH+

CH-

VOL+

VOL-

TUNING

BAND

SKIP OFF

FINE TUNE

AUTO SEARCH

COLOR SYSTEM

PROG NO

TUNING

BAND

SKIP OFF

FINE TUNE

AUTO SEARCH

COLOR SYSTEM

PROG NO

TUNETUNE

Tunning

Tuning functions

Manual search

4.Press VOL+/- button to start searching.

VOL- button is used to search the lower frequency

channel.

VOL+ button is used to search the higher frequency

channel.

Repeat the steps until you find the channel you need.

1. Press CH+/- button or the Direct-digit Choosing button to

select a channel directly(take channel 1 for example).

Press the TUNE menu button, and the TUNE

menu display on the screen.

Press the CH+/- buttons select SEARCH

Manual search

If you changed the channel number 5 seconds ago,

the channel number will disappear .If you want to know

the screen display, please press the CALL button.

VOL-

CH+

CH-

VOL+

TUNE

TUNING

COLOR SYSTEM

BAND

SKIP OFF

PROG NO

FINE TUNE

AUTO SEARCH

Tuning functions

4. Press VOL+/- buttons to carry out tune,

till the best picture and sound are obtained.

Press the CH+/-buttons or PROGRAM

NUMBER (0-9)button to choose desired

channels(I.E.channel 1)

2. Press the TUNE menu button, and TUNE

menu appear on the screen.

Press CH+/- to select “FINETUNE”

FINE TUNE

Fine tune

VOL-

CH+

CH-

VOL+

If the picture or sound is poor,try the FINE

TUNE feature .Do not use this feature

unless reception is poor.

CH+

CH-

VOL+

VOL-

TUNING

COLOR SYSTEM

BAND

SKIP OFF

PROG NO

FINE TUNE

AUTO SEARCH

Tuning functions

Program skip

Press the VOL-/+ buttons to turn the

SKIP function "ON".

5. Press the TUNE button to close the menu. When you

use the CH+/- buttons to select channel, this channel will

be skipped. However, you can still use the PROGRAM

NUMBER buttons to select the skipped channel numbers.

If you want to recover the skipped channel

Use the PROGRAM NUMBER buttons to select the

channel number to be recovered.

2.Repeat those steps just now

Press the VOL-/+ buttons to turn the SKIP function "OFF".

1 Press the CH+/- buttons or PROGRAM

NUMBER 0-9 button to choose desired

channels I.E. channel 1 .

2 Press the TUNE menu button , and the

TUNING menu shown on the right display

on the screen.

Press the CH+/- buttons to select "SKIP".

The Program skip feature enables you to

skip/hide programs that you do not wish to be

displayed when using the CH+/- buttons.

Program skip

VOL-

CH+

CH-

VOL+

CH+

CH-

VOL+

VOL-

TUNING

BAND

SKIP OFF

PROG NO

FINE TUNE

AUTO SEARCH

COLOR SYSTEM

How to select picture modes

You can quickly select the desired picture mode

from four preset modes and one customized

mode.

Press the P.STD button to select the desired

picture quality. Five kinds of picture modes (i.e.,

"STANDARD",”RICH", "USER","LISTEN",

"SOFT" ) can be selected in turn.

How to customize your own picture status

2.Press the CH+/- buttons to select the item to

adjusted, then press the VOL-/+ buttons

to obtain the desired effect.Press the PICTURE

menu button again to exit .

1.Press the PICTURE menu button ,and the

PICTURE menu shown on the right display on

the screen.

ITEM

CONTRAST

BRIGHTNESS

Weak

Dark

Shallow

Soft

Strong

Bright

Deep

Sharp

Press VOL-

Press VOL+

STANDARD

RICH

SOFT

LISTEN

USER

¶àÖÖÍ¼ÏñÄ£Ê½

SHARPNESS

COLOUR

CH+

CH-

VOL+

VOL-

Convenient picture control functions

Multiple picture modes

PICTURE

BRIGHTNESS 32

COLOR 48

SHARPNESS 40

PICTURE BOOST 1

CONTRAST 48

Í¼Ïñ½µÔë

Í¼ÏñÔöÇ¿

¹Ø

How to select BLACK STRETCH

How to select PICTURE BOOST

2.Press CH+/- button to select BLACK STRETCH .

Press CH+/- to select “PICTURE BOOST ”.

3.Press VOL+/- button to turn the BLACK STRETCH

function “ ON” or “OFF”

Press VOL+/- button to set the value of

PICTURE BOOST .

1.Press the FUNCTION menu button and the

FUNCTION menu appears on the screen.

1.Press PICTURE menu button,and

the PICTURE menu appears on the screen.

·½±ãµÄÍ¼Ïñ£¨½ÓÉÏÒ³£©

Convenient picture control functions

BALCK STRETCH and PICTURE BOOST

PICTURE

BRIGHTNESS 32

COLOR 48

SHARPNESS 40

PICTURE BOOST 1

CONTRAST 48

Í¼Ïñ½µÔë

Í¼ÏñÔöÇ¿

¹Ø

PICTURE

VOL-

CH+

CH-

VOL+

FUNCTION

VOL-

CH+

CH-

VOL+

FUNCTION

BACKGROUND ON

BLACK STRETCH ON

AVL ON

Black stretch automaticlly increase the contrast range.

This TV set provides you with three timer functions such as timer on, timer off

and sleep off.

TIME

ON TIME

ON PROG

OFF TIME

SLEEP TIME

REMIND TIME

REMIND PROG

CLOCK

Time functions

Using on/off timer function, the TV set can

automatically turn on to a preset program or shut

down in a preset time.

On/off timer

Clock setting

3 Press the CH+/- buttons to select "ON PROG",

then press the VOL-/+ or program direct number

buttons to select your desired channel (take 8 as

an example).

4 Repeat step 1-2 to set OFF TIME.(take 23:00

as an example)

2. Press the CH+/- buttons select "CLOCK",

then press the VOL -/+ buttons to adjust the

time in hour position; press again the CH+/-

buttons to select the time in minute position,

then press the VOL -/ +buttons to adjust the

value of minutes.

2 Press the CH+/- buttons to select "ON TIME",

then press the VOL -/+ buttons to set the value

in hour position; press again the CH+/- buttons

to select the minute position and set the value

of the minute.(take 18:00 as an example)

1. Press the TIME menu button, and the TIME

menu display on the screen.

1 Press the TIME menu button to call up the

TIME menu on the screen.

We can set the CLOCK as follows:

NOTE:ON TIME only work if the TV set is in the standby.

TIME

ON TIME

ON PROG

OFF TIME

SLEEP TIMER

REMIND TIME

REMIND PROG

CLOCK

TIME

ON TIME

ON PROG

OFF TIME

SLEEP TIME

REMIND TIME

REMIND PROG

CLOCK

TIME

VOL-

CH+

CH-

VOL+

VOL-

CH+

CH-

VOL+

TIME

Program remind timer, that displays an on-screen reminder

prompt, when a program on a different channel is due to

start

REMIND PROG function

3.Press the CH+/- buttons to select "REMIND PROG",

then press the VOL -/+ buttons or the program direct

number buttons to set the desired channel (take 18

as an example).

1.Press the TIME menu button to call up the TIME

menu on the screen.

Press the CH +/- buttons to select "REMIND TIME",

then press the VOL -/+ buttons to set the value in hour

position; press again the CH+/- buttons to select the

minute position, and then set the value of the minute.

(Take 19:00 as an example)

Time functions

Continued

REMIND PROG function

TIME

ON TIME

ON PROG

OFF TIME

SLEEP TIME

REMIND TIME

REMIND PROG

CLOCK

TIME

ON TIME

ON PROG

OFF TIME

SLEEP TIME

REMIND TIME

REMIND PROG

CLOCK

VOL-

CH+

CH-

VOL+

TIME

How to start screen saver function

When the BACKGROUD functions ON, the screen

will turnautomatically as shown "NO SIGNAL" of

moving .

1.Press the FUNCTION menu button till the

FUNCTION menushown on the right display on

the screen.

2 Press the CH+/- buttonstoselect

“BACKGROUND" and pressthe VOL-/+ buttons to

turn the BACKGROUND function "ON" .

FUNCTION

Set up function

FUNCTION

BACKGROUND ON

BLACK STRETCH ON

AVL ON

How to start screen saver & AVL function

VOL-

CH+

CH-

VOL+

Automatic Volume Level control reduce the

effortof large volume changes.

FUNCTION

BACKGROUND ON

BLACK STRETCH ON

AVL ON

1.Press the FUNCTION menu button the

,and

FUNCTION menu shown on the right display

on the screen.

3.Press VOL-/+ button to turn the AVL function

“ON" or "OFF"

2.Press the CH+/- button to select “AVL" .

AVL function

FUNCTION

VOL-

CH+

CH-

VOL+

Channel exchange

for example, to change between channel 6

and 9

2.Press VOL button or Direct-digit button set

the

-/+

PROGRAM 1.

Press the VOL-/+ buttons to set “EXCHANGE".

Press the CH-/+ buttons to select " PROGRAM 2".

Press the CH+/- buttons to select "EXCHANGE".

Press the VOL-/+ buttons or the PROGRAM

NUMBER 0-9 buttons to set PROGRAM 2 TO 9.

1. Press MENU button continuously until select

menu. Channel exchange

Setting the other Function(continued)

The function of channel exchange will enable you to exchange any two programs

and you can conveniently adjust the order of the programs due to your own need.

Channel exchange

EXCHANGE

PROGRAM 2

EXCHANGE

PROGRAM 1

EXCHANGE

PROGRAM 2

EXCHANGE

PROGRAM 1

EXCHANGE

PROGRAM 2

EXCHANGE

PROGRAM 1

VOL-

CH+

CH-

VOL+

Setting the other Function(continued)

2.Press CH+/- button to turn the YEAR/MONTH/DAY ,

press VOL+/- button to adjust or set the

YEAR/MONTH/DAY.

Screen display

Cancel the menu display right now

In common ,the menu display will disappear

after a moment .if you want to cancel the menu

diaplay right now ,press the EXIT button.

Calender function

How to use the calendar function

This TV set has been designed to store the

calender from the year 1901-2099.

1. Press the MENU button ,till the

CALENDAR menu appears on the screen.

Usually ,when you press the CALL

button,the channel number will appear on

the top right corner of the screen .

Page is loading ...

Haier 29FA11-AM Owner's manual

Brand: Haier

Model: 29FA11-AM

Category: CRT TVs

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Haier 29FA11-AM Owner's manual

This manual is also suitable for

Haier 29FA11-AM Owner's manual

Related papers

Other documents