OWNER'S MANUAL
COMBINED 21" CTV AND DVD PLAYER
CTV
+
Please read this manual carefully
before using this TV set and keep it
for future reference.
If you experience any diffculty in setting up or operating
this product please contact the Helpline on 01422 203676.
AODV211T-S
CONTENTS
Before Operation
Basic operation
Warning and cautions...........................................................................2
Installation..............................................................................................3
Aerial connection..................................................................................3
Preparation of the remote control.........................................................3
Function buttons and external sockets...............................................4
Front panel of the TV set.....................................................................4
Rear panel of the TV set.......................................................................4
Using the remote control......................................................................5
Switching on/off the TV set ..................................................................6
Watching TV ..........................................................................................7
Watching TV program..........................................................................7
Program swap and auto scan functions...............................................8
Searching channels...............................................................................9
Full automatic mode...........................................................................9
Semi-automatic search......................................................................10
Manual fine tune.................................................................................11
Program skip .....................................................................................12
Convenient picture and sound control functions.............................13
Multiple picture modes .....................................................................13
Black stretch and noise reduce..........................................................14
Mute and the language on the screen...............................................15
Time functions.....................................................................................16
Clock setting and timer on/off functions..........................................16
Sleep timer and program preset ......................................................17
Setup function ....................................................................................18
Screen saver and childlock functions.................................................18
AVL and calendar functions ..............................................................19
Position exchange function...............................................................20
Teletext..................................................................................................21
DVD Operation
Basic Playback.....................................................................................23
Advanced Playback..............................................................................24
Special Function Playback..................................................................25
DVD System Setup...............................................................................27
Playable Discs......................................................................................31
Disc Protection and DVD Characteristics..........................................32
Others
Connection to the external audio and video equipment..................33
Troubleshooting guide........................................................................34
Specifications......................................................................................35
Warning and cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. Do not allow the Tv to become wet
or be used in a humid atmosphere. The
set must only be used in dry locations.
Allowing water or fluid
to enter the cabinet
could result in Electric
shock or Fire .
5. Do NOT remove the cabinet back,
this could result in an Electric shock .
If the TV should become faulty, it must
only be serviced by a qualified
technician.
3. Don't place the
TV set in direct
sunlight or near a
heat source.
6. If the TV is not going to be used for a
long time, or there is an Electrical storm
in the area, unplug the External antenna
and Mains supply.
Cleaning the tube
If the picture tube cleaningrequires , disconnect the power and use a dry
soft cotton cloth. Do not use any cleaner or abrasive cloths.
22
2. In order to prolong the of the
product,
life
ensure that it is well ventilated.
Do NOT cover any ventilation slots.
Installation
Aerial Connection
If the picture is not clear or is snowy, it is recommended that an External Aerial is
used, this is usually mounted outside.
Preparation for the remote control
Battery installation
Tips for remote operation
Remove the battery cover.
Insert two size AAA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
!
!
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
AC power socket
Aerial input
75 standard
coaxial type
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
(Not supplied)
(Not supplied)
COAXIAL
!
!
!
When the remote control is not to be
used for a long period, or the batteries
are worn out, remove them to stop
leakage and corrosion.
Do NOT throw used batteries in the fire.
Dispose of batteries in a responsible
manner.
Do not drop or dismantle the remote
control.
Function Buttons and External Sockets
Front panel of the TV set
Rear panel of the TV set
DVD EXT
TV EXT
COAXIAL
DVD SCART Terminal
TV SCART Terminal
Digital audio coaxial output terminal
VIDEO L-AUDIO-R
TV/DVD MENU V- V+ P- P+
Video
R/LAudio
The DVD Player
Power Indicator
Signal Receiver
TV/DVD Switching
Menu
Volume up/ down
Channel Position up/down
Open/close the DVD
Stop the DVD
Power Switch
Play the DVD
COAXIAL
Using the Remote Control
DVD Open/close
Stand By
Scan
Former Program
Mute
Call Screen Display
Program Number
Digital Selector
TV/AV Exchange
Picture Mode
TV/DVD
Volume Selection
Channel Selection
Exit Screen Display
10+
MENU
DVD STOP
DVD PAUSE/STEP
DVD SETUP
DVD NEXT
DVD MENU
DVD A-B REPEAT
DVD Cursor Move button
DVD REPEAT
DVD SLOW
DVD SEARCH
DVD TITLE
ZOOM
DVD PLAY/ENTER
DVD ANGLE
DVD AUDIO
DVD PROGRAM
DVD SUBTITLE
DVD CALL
(Not available)
TELETEXT BUTTONS
MENU CALL ( ALSO FOR TELETEXT
BUTTONS)
DVD FAST REVERSE
DVD FAST FORWARD
DVD PREVIOUS
Buttons on the remote control
10+
OPEN/CLOSE
POWER
SCAN SWAP
CALL
MUTE
TV/AV
TV/DVD
P.STD
EXIT
P+P+
P-P-
MENU
V-V- V+V+
STOPSTOP
SETUPSETUP PAUSE/STEPPAUSE/STEP
REVREV
FWDFWD
PREVPREV
NEXTNEXT
D.MENUD.MENU
PLAY/ENTERPLAY/ENTER
REPEATREPEAT
A-BA-B
SLOWSLOW
TITLE/PBCTITLE/PBC
SEARCHSEARCH
ANGLEANGLE
AUDIOAUDIO
PROGRAMPROGRAM
CAPTIONCAPTION
D.CALL
PICTURE SOUND FUNCTIONTIME
TUNE
UP
DOWN
LEFT
RIGHT
ZOOM
4
AUTO
I
Switching on/ off the TV set
Switching on/ off the TV set
Switching on/ off the TV set
1
Press the Power switch on. The power indicator
will light.
2 If the indicator is Red press the button
on the remote control. Alternatively you can turn
the TV on with P+ or P- buttons, if the Child lock
is not set .
Note
1 To turn the set off to Standby press
button on the remote control.
2 To turn off the TV fully, press the Power button
and release.
Auto switch-off function
This section explains the use of the power button and remote handset
to turn your unit on and off.
Should the signal input from the aerial be
interrupted for more than 5 minutes, the TV
will automatically switch to Standby .
If the Tv is in A/V mode or the Background
is set to off (see page 18), the set will not switch
to standby.
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
Watching TV
Watching TV program
Select the desired program
Adjust the Volume level
How to select a TV programme.
1 Using "Program number" buttons
Press the V-/+ buttons on the remote or the front of the TV
set to adjust the volume level. The range is 0~100. When the
volume buttons are pressed the volume level is displayed
automatically on the TV screen.
If picture colo r is abnormalu
If the picture colour is incorrect. This may be due to the TV
being set to the incorrect standard. Use P+ or P- to select
Colour then the V+ /V- buttons to change between Auto,
. Press the EXIT button to save the
setting.
PAL,
NTSC and NTSC443
TUNE
TUNE
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
COLOUR AUTO
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
2 Using the P+/- buttons
Press the P+ button to increase channel number.
Press the P- button to decrease channel number.
18
AUTO
I
8
AUTO
I
18
AUTO
I
Watching TV continued
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs in
memory with (each channel will last about 2 seconds)."OFF" skip status
Program swap and auto scan functions
Program swap
1
Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
2 If you want to stop the function
during auto scanning, simply
press the SCAN button again.
SWAP
SCAN
1 Press the SCAN button to
scan through all the memorized
TV channels. The scan will
pause for about 2 seconds on
each channel.
1
AUTO
BG
SCAN
2
AUTO
BG
SCAN
3
AUTO
BG
SCAN
1
AUTO
BG
SCAN
P+P+
P-P-
MENU
V-V- V+V+
Searching channels
This TV set has three methods to set the channels, which are respectively full
automatic, semi automatic and manual fine tune.
-
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the Tv .to set the channel
Full automatic mode
1 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
2 buttons to
select "AUTO SEARCH".
Press the P+/-
3 Press V+ to start the Auto
search. All channels will be
stored in the order they are
received. After the search has
finished, the first channel
received will be displayed.
TUNE
TUNE
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
COLOUR AUTO
Display function
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
3
AUTO
I
CALL
TUNE
COLOUR AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
P+P+
P-P-
MENU
V-V- V+V+
1
AUTO
I
6
Searching channel
Continued
s
Semi-automatic search
Semi-automatic search
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
buttons to choose desired
channels I.E. channel 1
2
Press the TUNE button, the
TUNE menu will be shown on
the right of the screen.
3 buttons to
select " SEARCH".
Press the P+/-
4
The V- down button is used
for lower side program search.
The V+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
Press the V- to search down
the scale and V+ to search up
the scale.
SEARCH
152.25MHz
TUNE
EXIT
To turn off the on-screen menu
In general, after you press the MENU button, the menu
display (PICTURE, TIME
ETC.) will automatically disappear within 15 seconds. If you
want to eliminate these contents immediately, please press
the EXIT button.
item
, FUNCTION, TUNE, EXCHANGE,
TUNE
COLOUR AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
AUTO SEARCH
FINE TUNE
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
5
FINE TUNE
152.25MHz
Searching channels
Continued
Manual fine tune
Manual fine tune
2 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
3 buttons to
select " FINE TUNE".
Press the P+/-
4 Press the V-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained.
TUNE
TUNE
COLOUR AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
AUTO SEARCH
FINE TUNE
1
AUTO
I
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
Searching channels
Continued
Program skip
Programme skip
2 Press the TUNE button , the
TUNE menu shown on the right
display on the screen.
3 buttons to
select "SKIP".
Press the P+/-
4 Press the V-/+ buttons to
turn the SKIP function "ON".
5 Press the TUNE button to close
the menu. When you use the P /
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
+-
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the V-/+ buttons to turn the SKIP function "OFF".
TUNE
TUNE
COLOUR AUTO
BAND VHFL
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
SKIP OFF
TUNE
COLOUR AUTO
BAND VHFL
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
SKIP ON
1 During Auto tune some
channels may have been received
which are of poor quality, noisy or
ghosting. These can be removed
with Program Skip .
1
AUTO
I
Channels can be set so that they are skipped during
program selection.
P+P+
P-P-
MENU
V-V- V+V+
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
Convenient picture and sound control functions
Press the P.STD button to select the
desired picture quality. Five kinds
of picture modes (i.e.,
"RICH", "USER","LISTEN",
"SOFT" ) can be selected in turn.
"STANDARD",
USER
LISTEN
RICH
STANDARD
SOFT
How to customize your own picture status
1 Press the PICTURE button, the menu shown on
the right display on the screen.
PICTURE
2 Press the P+/- buttons to
select the item to adjusted,
then press the V-/+ buttons
to obtain the desired effect.
P.STD
PICTURE
BRIGHTNESS
SHARPNESS
*Hue
CONTRAST
COLOUR
Weak
Shallow
Dark
Soft
lean to purple
Strong
Deep
Bright
Sharp
lean to green
ITEM
Press V -
Press V +
PICTURE
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH OFF
CONTRAST 48
Note:
The "Hue" item only appears when the colour system is NTSC.
The 5 modes are
Listen-This is a new feature that blacks out the TV
screen when listening to music only channels;
Soft-Designed for night time low light viewing;
Standard -Designed for rooms that have good all round
lighting;
Rich-Designed for rooms with high ambient lighting such
as daytime sport;
User-A spare setting that can be adjusted to personal
tastes.
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
Black stretch and noise reduce
Convenient picture and sound control functions
Continued
How to select BLACK STRETCH
How to select NOISE REDUCE
1 Press the button, the
menu shown on the
right display on the screen.
PICTURE
PICTURE
1 Press the FUNCTION button,
the menu shown on
the right display on the screen.
FUNCTION
2 buttons to
select "BLACK STRETCH".
Press the P+/-
2 buttons to
select "NOISE REDUCE".
Press the P+/-
3 Press the V-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
3 Press the V-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
PICTURE
FUNCTION
PICTURE
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH OFF
CONTRAST 48
PICTURE
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH ON
CONTRAST 48
Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception)
Black Stretch Automatically increases the contrast range
FUNCTION
LANGUAGE
BACKGROUND ON
CHILD LOCK OFF
AVL ON
CALENDAR
NOISE REDUCE ON
FUNCTION
LANGUAGE
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
BACKGROUND ON
Convenient picture and sound control functions
Continued
MUTE
Sound mute
MUTE
Mute and the language on the screen
1 Press the MUTE button on the
remote control to turn off the
sound. MUTE will appear on the
top left of the display.
2 Press MUTE again to turn the
sound back on.
P+P+
P-P-
MENU
V-V- V+V+
1 Press the FUNCTION button,
the menu shown on
the right display on the screen.
FUNCTION
2 buttons to
select " LANGUAGE ".
Press the P+/-
FUNCTION
FUNCTION
LANGUAGE
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
BACKGROUND ON
How to select the language on the screen
3 Press VOL+button to select
on-screen display language.
FUNCTION
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
LANGUAGE
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
On/off timer
Clock setting
Time functions
Clock setting and timer on/off functions
1 Press the TIME button, and
the TIME menu display on the
screen.
2Press the P
.
+/- buttons select
"CLOCK", then press the V-/+
buttons to adjust the time in
hour position; press again the
P+/- buttons to select the time
in minute position, then press
the V-/ +buttons to adjust the
value of minutes
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock loses power and will need to
be reset when the power is reconnected.
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
3 Press the P+/- buttons to
select "ON PROG", then press
the V-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
2 Press the P+/- buttons to
select "ON TIME", then press
the V-/+ buttons to set the value
in hour position; press again the
P+/- buttons to select the minute
position and set the value of the
minute.(take 18:00 as an
example)
1 Press the TIME button to call
up the TIME menu on the
screen.
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
TIME
TIME
TIME
ON TIME 18:00
ON PROG 1
OFF TIME --:--
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
CLOCK 17:18
TIME
ON TIME 18:00
ON PROG 1
OFF TIME --:--
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
CLOCK 17:18
TIME
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
CLOCK 17:18
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
Sleep timer and program preset
Sleep timer
REMIND PROG function
The TV has 18 option settings for
Sleep timer , each setting has
a time value of 10 minutes.
0
10
20
170
180
1 Press the TIME button, and
the TIME menu display on the
screen.
2 Press the P+/- buttons to
select "SLEEP TIMER".
1 Press the TIME button to call
up the TIME menu on the
screen.
2 Press the P+/- buttons to
select "REMIND TIME", then
press the V-/+ buttons to set
the value in hour position;
press again the P+/- buttons to
select the minute position, and
then set the value of the
minute.(take 19:00 as an
example)
3.Press the P+/- buttons to
select "REMIND PROG", then
press the V -/+ buttons or the
program direct number buttons
to set the desired channel
(take 18 as an example).
TIME
TIME
Time functions
Continued
TIME
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND TIME --:--
REMIND PROG 1
CLOCK 17:18
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND PROG 1
REMIND TIME 19:00
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND TIME 19:00
REMIND PROG 18
NOTE: For
CHILD LOCK must be
turned off.
REMIND PROG to
operate
Program remind timer, that displays an on-screen reminder
prompt, when a program on a different channel is due to start.
3 press the V -/+ buttons to set
the value of the SLEEP TIMER.
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
NO SIGNAL
Set up function
Screen saver and childlock functions
How to select Screen saver function
1
Press the Function button, the
Function menu will be displayed
on the right of the screen.
2 Press the P+/- buttons
.
to
select "BACKGROUND" and press
the V-/+ buttons to turn the
BACKGROUND function "ON"
FUNCTION
2 Press the P+/-
.
buttons to
select "CHILD LOCK" and press
the V-/+ buttons to turn
CHILD LOCK function "ON"
Child lock function
FUNCTION
NOTE:
All the control panel buttons on the front of the TV are disabled
when CHILD LOCK is turned on. The power switch will still turn
the TV set off.
Enables the TV front control buttons to be locked.
When the function ON a bouncing
No Signal logo will be displayed on a blue
background.
Background is
FUNCTION
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
LANGUAGE
FUNCTION
LANGUAGE
BACKGROUND ON
NOISE REDUCE ON
AVL ON
CALENDAR
CHILD LOCK ON
1
Press the Function button, the
Function menu will be displayed
on the right of the screen.
P+P+
P-P-
MENU
V-V- V+V+
P+P+
P-P-
MENU
V-V- V+V+
AVL and calendar functions
Set up function
Continued
2 Press the P+/-
.
buttons to select
"AVL"
3 Press
.
V-/+ buttons to turn the
AVL function "ON" or "OFF"
FUNCTION
3 Press the P+/- buttons to turn
the YEAR/MONTH/DAY, press
V-/+ buttons to set or adjust
the YEAR/MONTH/DAY.
Calendar function
FUNCTION
2 Press the P+/-
buttons to select
"CALENDAR" , then press the
V-/+ buttons to the CALENDAR
display on the screen.
AVL function
Enables the TV sets internal calendar to be set.
Automatic Volume Limit Control reduces the effect of
large volume changes. For instance, when
advertisements come on.
FUNCTION
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
LANGUAGE
FUNCTION
LANGUAGE
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
CALENDAR
AVL ON
FUNCTION
BACKGROUND ON
NOISE REDUCE ON
CHILD LOCK OFF
AVL ON
CALENDAR
LANGUAGE
1
Press the Function button, the
Function menu will be displayed
on the right of the screen.
1
Press the Function button, the
Function menu will be displayed
on the right of the screen.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Panasonic WJ-SW208E Owner's manual
-
Orion TV/DVD-1432 Owner's manual
-
Haier DTA-2189 Owner's manual
-
-
-
-
-
Audix TVD6040 User manual
-
-