Barco F32 series User manual

Type
User manual
Sales Support - Projection
www.barco.com
Page 1 of 1
V1.0 CMAD 02/15
F Series Factory Colour Matching
GENERAL RELEASE APPROVED
F Series Factory Colour Matching
What is Factory Colour Matching?
Factory Colour Matching is available on all Barco F series projectors. It is recommended for colour
critical multi-channel applications.
When two or more Factory Colour Matched projectors are specified Barco ensures that ‘brightness’ and
optics are chromatically matched to within a tight tolerance. This means that measured lumens and
colour coordinates are comparable, that projectors can be set up side by side at system level and
appear similar.
- Achieving ‘perfect’ adjacent channel colour match at system level may require further adjustment
using Barco RealColor™.
Factory Colour Matching specifications are provided below:-
Technology
LUX
White
Cx
Red
Cx
Red
Cy
Green
Cx
Green
Cy
Blue
Cx
Blue
Cy
Single Chip UHP Lamp
VizSim Colour Wheel
15%
0.010
0.010
0.010
0.010
0.010
0.010
0.010
Single Chip UHP Lamp
VizSim Bright Colour Wheel
15%
0.010
0.010
0.010
0.010
0.010
0.010
0.010
Single Chip UHP Lamp
High Brightness Colour Wheel
15%
0.010
0.010
0.015
0.010
0.015
0.010
0.015
Single Chip LED
15%
0.010
0.010
0.015
0.010
0.015
0.010
0.015
3 Chip UHP Lamp
15%
0.010
0.010
0.010
0.010
0.010
0.010
0.010
What does this really mean?
Factory Colour Matched projectors have a comparable Gamut. This means that batch matched
projectors can be accurately colour matched using Barco RealColor™ without detrimental effect. It does
not guarantee perfect out of the box colour match.
How do I order Factory Colour Matching?
Factory Colour Matching is a chargeable service (per projector). Requirements must be declared on any
Purchase Order using Barco Part Number: R9801284.
  • Page 1 1

Barco F32 series User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI