PAGE - 1 -
Mini HYDRA FACIAL SKIN SPA SYSTEM
For home use
PAGE - 2 -
IMPORTANT: before starting the equipment correctly, please follow the installation instructions.
Any damages caused by incorrect operations will void the warranty.
SAFETY INFORMATION
Thank you for choosing our products! This user instruction is specially designed for the safety of you and
others. Please read the instructions carefully before installing or using the machine and follow them when
using.
1.1 Electrical Safety
- Before installing the machine, make use that your local electric network complies with the voltage and
frequency indicated on the tag on the rear panel. Otherwise, the machine may be damaged in case of
excessive current or voltage rise.
- Never touch the machine with damp or wet hands or feet.
- It is dangerous to change or try to modify the function of this machine in any way.
- Do not attempt to operate this unit if the power cord has been frayed or broken
- Do not spill water or other liquids into or on to your unit.
- During long periods of non-use, disconnect the unit’s main power.
1.2 Safety Rules When Installing
- Place the machine on a stable and secure base. It should not be subjected to any jolts or vibrations.
- Never expose the unit to too high (>40ºC) nor too low temperature (<5ºC).
- NEVER EXPOSE THE UNIT TO RAIN OR ANY OTHER HUMIDITY.
- DO not expose the unit to direct sunshine or install the unit close to a source of heat (central heating,
radiator…); otherwise the screen may be damaged.
- Do not cover or block the ventilator behind the unit.
1.3 Safety Rules When in Use.
- Well clean areas to treat before treatment.
- Never touch the machine with damp or wet hands or feet.
USER MANUAL
PAGE - 3 -
- Never place the cavitation handpiece on the liver, kidney area.
WORKING THEORIES AND BENEFITS
Hydradermabrasion (Hydra Facial) – the latest in skincare technology. Hydradermabrasion utilizes the
natural healing powers of water and oxygen to effortlessly exfoliate the skin without the use of hard
crystals or abrasive textured wands, generating deeply hydrated and healthier looking skin.
Jet Peel have created a crystal free dermabrasion applicator, a hand held nozzle that works by utilizing a
high velocity jet of water combined with oxygen. This completely natural combination of micro
droplets of water is dispersed from the nozzle at high speed, striking against the skin and thereby
removing any dead skin cells with little effort and absolutely no pain to the client, deeply exfoliating and
rejuvenating the skin.
Microdermabrasion
Microdermabrasion is a non-invasive skincare procedure that whilst exfoliating the skin promotes the
PAGE - 4 -
production of new cells, and stimulates the growth of collagen to improve the skins tone and appearance.
Application
1 Rejuvenate sun damaged skin-face, neck, shoulders, back, arms and legs.
2 Reduce age spots
3 Minimize of blotchy skin coloring
4 Reduce acne and superficial scars from past injury
5 Remove blackheads and white heads
6 Reduce oily skin
7 Improve overall skin health
SYSTEM DESCRIPTION
Unpacking: Thank you for purchasing the Mini Hydra Facial Skin SPA system Every SPA V5has been
thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully
inspect your fixture for any damage and be sure all accessories necessary to operate the unit have arrived
intact. In the case damage has been found or parts are missing, please contact the courier and get proof
documentation for claim and contact our customer support number for further instructions.
Customer Support: Technology provides a customer support line, to provide services for all our products.
* PLEASE recycle the shipping carton whenever possible.
What’s in the package? (Details)
Machine Main
body
Hydradermabrasion
wand and tips
(Standard)
PAGE - 5 -
Water Micro
Dermabrasion
wand & tips
(Optional)
Silicone Water
Dermabrasion
wand & tips
(Optional)
Liquid
Liquid-collected
Bottle
User Manual
Accessories
Screws, power cord, sealing ring, etc
Installation:
1. Get the machine and the accessories from the package
2. Connect the selected probe to the inlet socket;
3. Connect the liquid-collected bottle probe to the outlet socket
(See figure 1)
4. Turn on the machine.
Machine Parts:
1. Vacuum pressure panel
2. Vacuum adjust knob
3. Handpiece holder
4. Serum bottle
5. Used-water collect bottle
6. Power switch
7. Power socket
8. Water outlet
9. Water Inlet
* Before operating the machine, please check the connections. Then turn on and off the machine for 3 to 5
times. Then keep the machine running for 5 minutes to check the stability of the machine.
Figure.1
PAGE - 6 -
SPECIFICATIONS
Technology
1) Hydra facial / hydradermabrasion
2) Water microdermabrasion (Optional)
3) Silicone water dermabrasion (Optional)
Vacuum Power
70 Kpa Max
Technology
Hydradermabrasion
Max Output
130 VA
Operation Control
Control Panel
Handpieces
1) Hydradermabrasion handle with 8 tips
2) Microdermabrasion handle with 9 tips (Optional)
3) Silicone water dermabrasion handle with 8 tips (Optional)
Electrical
100-240VAC, 50Hz/60Hz
Packing Size
52*49*43 cm3
Weight
4.5 KG
Warranty
1 Year / 12 Months
OPERATION INSTRUCTIONS
1. Choose the right handpiece connected with the inlet and outlet socket;
2. Turn on the machine and use the control knob to adjust the right vacuum output level; And control the
water level (water pressure) through the knob in the back of the machine (As the picture showed);
3. Clean the treatment area, place the handpiece onto the treatment area and start the treatment;
Notice: Please keep track on the water level; When the liquid-collected bottle is
full, it will stop machine running and make sound alert to protect the system.
Please empty the bottle and the machine will back to work again;
Contraindications
- People who has fever, infectious diseases, acute diseases.
- People with heart disease or configured cardiac pacemaker.
- Patients with severe high blood pressure, tumor disease, asthma, deep vein thrombosis, varicose veins,
thyroid, cancer, falling sickness.
- People with hemorrhagic disease, trauma, vascular rupture, skin inflammation, skin Disease.
- Pregnant women
- Do not use at the abdomen during menstrual period
- Medical Plastic parts, or parts with metal inside
- People with an abnormal immune system
PAGE - 7 -
PRODUCT SERVICE AND MAINTENANCE
1. Warranty: The warranty date is one year from the date of purchasing. We are responsible for the
maintenance in our facility in GZ. When the warranty date is expired, we will charge the service fee or
the cost of the component.
2. Professional Use: The merchandise of our Products is designed for professional use only and must be
installed by a licensed professional electrician only. Failure to do so will void customer warranty.
3. Manufacturer Defects: In the event of defects in material and workmanship our obligation shall be
limited to free labor and parts repair or replacement, solely at our option, of any defective part for a
period of one year from the date of purchase.
4. Disclaimer of Damages: The remedies provided herein are the buyer’s sole and exclusive remedies and
in no event shall our products be liable for direct, indirect, special, incidental, or consequential damages
(including loss of profits) whether based on contract, tort, or any other legal theory.
5. Returns: All damaged machines must return in 30 days after receiving the confirmation from our
service department.
6. Shipping Policy: For your protection, the acceptance of this shipment by the Transportation Company
is an acknowledgement that the articles were delivered to them in good working condition and properly
packed.
7. Exceptions
- Inappropriate damage such as: dramatic impact, vibration, drop, condenser chamber burning, crystal
rods destroying, etc.
- Inappropriate damage or loss of key components such as the handpiece, protective glasses, power lines,
you will be charged for the cost of accessories.
- Consumer who repairs the machine caused by improper by himself.
- Due to irresistible forces (such as fires, earthquakes and other natural disasters) of damage.
- Beyond the period of warranty products.
WARRANTY CARD
MANUFACTURER
PRODUCT NAME
MODEL NUMBER
PLACE OF ORIGIN
Guangzhou, China
PRODUCTION DATE
PURCHASER
SELLER
PURCHASE DATE
ELECTRICAL
□220V/50Hz □110V/60Hz
/
