Vitek VT-TNR818PTH Quick start guide

Brand: Vitek

Model: VT-TNR818PTH

Type: Quick start guide

VITEK

VT-TNR818TPH

8 Channel 8 MegaPixel [4K] Real

Time PoE Advanced A.I. Network

Video Recorder with

Temperature Measurement

FEATURES

• Full 8 MegaPixel [4K] Real-time recording (240fps) with 240fps playback

• 4K HDMI & VGA Video Outputs

• H.265+ / H.265 / H.264 Video Compression

• Plug and Play & Auto Configuration for Leading ONVIF Compliant IP Cameras

• Temperature Measurement [F / C], w/ Real-time and Historical Statistics

• Real-time Face Capture and Temp. Measurement Display

• Real-time Alarm for Abnormal Temp. and Mask Detection

• Real-time Personnel Info. Display (Name, Area, Temp., Mask On / Off,

Company)

• Supports Facial Recognition (w/ or w/out Masks): 8 Channels, 20,000 Picture

Database (4 Groups: Attendance Group / Allow / Block / VIP)

• Features Facial Search-by-Picture by Temperature, Time, Camera, Event, and

Mask, with Ability to Add Pictures through App, Web, and External Import

• Allow / Block / VIP / Temperature Exception Alarm

• Attendance Management by Week / Month / Custom

• Face Greeting View and Settings via Web Client

• Access Control Trigger by Staff / VIP / Allow List

• Alarm Modes: Motion /Sensor Detection, A.I. Event, Temp., Exception Alarm,

Mask

• Alarm Linkage: Record, PTZ, Cruise, Alarm Out, Pop-up Window, Email,

Buzzer, App Push

• Internal 8-Port PoE Switch

• 1 Gigabit LAN Port

• Pentaplex: Live Display / Record / Playback / Backup / Remote Access

• 1 Internal SATA2/SATA3 HDD Slot supporting up to 10TB (1 x 10TB HDD)

• Control locally via USB Mouse (Included) or IR Remote control (Optional)

• 2-Year Warranty

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are

available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

2 3

NOTES

• Please read these instructions carefully before using the product and keep this for future reference.

• All the examples and pictures used here are for reference only.

• The contents of this manual are subject to change without notice.

• This device should be operated only from the type of power source indicated on the label. Also, verify

the voltage.

• PLEASE CHECK the device and accessories upon purchase. If there is any damage, shortages or

defects, please contact your VITEK Reseller immediately.

HDD INSTALLATION

• This Network Video Recorder supports 1 SATA hard drive.

• Please make sure that the device is powered off before installation. The pictures of the installation

are for reference only. In the event of a discrepancy, refer to the actual product.

Loosen the screws to open the cover.

Insert the screws into the HDD but do not tighten them.

Place the HDD onto the bottom of the recorder.

Turn over the machine and secure the HDD with included screws.

Connect the power and data cables.

Re-install the cover and secure it with the screws.

Tip: Please check the inside structure of the device and make sure the cables are well connected

before re-installing the cover.

REAR PANEL INSTRUCTION

*Product ports and rear panel features table on following page

NOTES

• Please read these instructions carefully before using the product and keep this for future reference.

• All the examples and pictures used here are for reference only.

• The contents of this manual are subject to change without notice.

• This device should be operated only from the type of power source indicated on the label. Also, verify

the voltage.

• PLEASE CHECK the device and accessories upon purchase. If there is any damage, shortages or

defects, please contact your VITEK Reseller immediately.

HDD INSTALLATION

• This Network Video Recorder supports 1 SATA hard drive.

• Please make sure that the device is powered off before installation. The pictures of the installation

are for reference only. In the event of a discrepancy, refer to the actual product.

Loosen the screws to open the cover.

Insert the screws into the HDD but do not tighten them.

Place the HDD onto the bottom of the recorder.

Turn over the machine and secure the HDD with included screws.

Connect the power and data cables.

Re-install the cover and secure it with the screws.

Tip: Please check the inside structure of the device and make sure the cables are well connected

before re-installing the cover.

REAR PANEL INSTRUCTION

*Product ports and rear panel features table on following page

START-UP AND SHUTDOWN

► Startup

Connect the monitor and the power.

The device will boot and the power indicator will display in blue.

A wizard window will pop up.

► Shutdown

Click “Start” and select the “Shutdown” icon. This will bring up a shutdown window.

The device will shut down by clicking the “OK” button. Then disconnect the power.

You must configure the wizard when you start the NVR for the first time. Choose the

language and read the privacy statement. Then set the data, time and zone as needed.

After that, set the login password.

The default username is ‘admin’ and the default password is 123456. Set your own

password or use the default one when you use the wizard for the first time. Enable

pattern lock and click “Edit” to set the pattern lock. Then set the security

questions and answers. It is important for you to remember these answers, or you

will not be able to reset your password. Click “Next” to continue.

4 5

DISK SETTINGS

You can view the disk number, Disk capacity of the NVR and Serial

Number, Read/Write status of the disk. Click “Format” to format the

disk. Click “Next” to continue.

NETWORK CONFIGURATION & ADDING DEVICES

Enter IP address, subnet mask, gateway. If using DHCP, please enable

DHCP in both the NVR and the router.

Enter HTTP port (the default value is 80) and server port (default is 6036).

The internal ethernet port connects all PoE ports in the NVR system. The ports

are available if the internal ethernet port is online; if it is offline, all ports will be

unavailable.

Add Camera. Click “Next” to go to the following interface.

RECORD SETTINGS

Two Record Modes: Auto and Manual.

Auto Mode: Select one Auto Mode in the interface as shown below and then

click “Next” to save the settings. Click “Advanced” to define a record mode.

Manual: Set the “Sensor Record”, “Motion Record”, “Analytics Record”

and “Schedule Record” of each camera. Please enable the record as needed.

Click “Next” to continue.

NETWORK ADDRESS TRANSLATION (NAT)

You can enable the NAT function in the interface or set it in the network

configuration after exiting the wizard. You can scan the QR code through the

mobile surveillance APP for iOS or Android to easily view your cameras.

►Web Client Access Through NAT Function

Enter www.autonat2.com in the address bar of your browser and then press enter

to go to the following interface. If it is your first time to access NAT, download

and install the plug-in according to the popup tips. After that, the login box will

be displayed.

RECORD SETTINGS

Two Record Modes: Auto and Manual.

Auto Mode: Select one Auto Mode in the interface as shown below and then

click “Next” to save the settings. Click “Advanced” to define a record mode.

Manual: Set the “Sensor Record”, “Motion Record”, “Analytics Record”

and “Schedule Record” of each camera. Please enable the record as needed.

Click “Next” to continue.

NETWORK ADDRESS TRANSLATION (NAT)

You can enable the NAT function in the interface or set it in the network

configuration after exiting the wizard. You can scan the QR code through the

mobile surveillance APP for iOS or Android to easily view your cameras.

►Web Client Access Through NAT Function

Enter www.autonat2.com in the address bar of your browser and then press enter

to go to the following interface. If it is your first time to access NAT, download

and install the plug-in according to the popup tips. After that, the login box will

be displayed.

6 7

You can enable the NAT function in the interface or set it in the network

configuration after exiting the wizard. You can scan the QR code through the

mobile surveillance APP for iOS or Android to easily view your cameras.

►Web Client Access Through NAT Function

ADD CAMERAS

Click Start→Settings→Camera to go to the “Edit Camera” interface.

Click “Add” to add cameras.

Select an IP camera / panel and then choose the terminal type as needed. Enter

the device name and password and click “Add” to add devices.

IP Panel: Four terminal types can be selected. Facial panel or attendance terminal is suggested.

Facial IPC: IP Cameras which support face recognition can choose this one.

PEOPLE MANAGEMENT

Click Start→People Management to go to the people management interface.

1. Click and then set the company name, department and position of people.

2. Add face pictures and relevant information for each group.

Select a group and then click “Add” to go to the following interface.

Click “Select face” to choose a face from snapshot gallery or external faces.

Fill out other info. (attendance area, pass through area) and click “Add”.

Multiple face pictures can be added from “External faces” too. Put pictures

and the file of personal information under the same directory of your mobile

storage device. Select this directory and click “Full Entry” to add.

Edit the file as follows:

Note: Currently, only when the face picture is added to the face database and

successfully matched by the IP Panel, can the Smart Management Terminal

(SMT) show the temperature and picture of the person.

LIVE DISPLAY

Area : Real-time statistical information display

Area : Real-time intelligent detection information display, including face

match, body temperature, mask status, area, etc.

Area : Real-time face capture and temperature measurement display

Multiple face pictures can be added from “External faces” too. Put pictures

and the file of personal information under the same directory of your mobile

storage device. Select this directory and click “Full Entry” to add.

Edit the file as follows:

Note: Currently, only when the face picture is added to the face database and

successfully matched by the IP Panel, can the Smart Management Terminal

(SMT) show the temperature and picture of the person.

LIVE DISPLAY

Area : Real-time statistical information display

Area : Real-time intelligent detection information display, including face

match, body temperature, mask status, area, etc.

Area : Real-time face capture and temperature measurement display

8 9

ATTENDANCE SETTINGS AND SEARCH

1. Click Start→Attendance→Rule Settings to go to the rule setting interface.

Set the working start and end time, “Late” and “leave early” rules, working

day and holiday. Click a date on the calendar to switch between working day

and holiday. Then click “Save” to save the settings.

2. Leave and Business Trip Settings: Go to the Leave and Business Trip

interface and then click “Add” to pop up a window. Click “Add” to add the

person who takes leave or a trip, then set the start and end time.

3. Attendance Search: Set the filter condition (attendance date, attendance

area). Then click “Search” to search the attendance information of staff.

Select a person click to view their detailed attendance information.

PASS-THROUGH RECORDS SEARCH

Click Start→Search and Backup→Pass-Through Records to go to the

following interface:

Detailed Specifications VT-TNR818TPH

Video Input

Resolution

Main Monitor Output

Multi Operation

Recording Compression

Recording

2-Way Audio, Local Output*

Face Detection

Adding Face Pics / Enrollment

A.I. Event

A.I. Statistics

A.I. Device Access / Analytics

Alarm Modes

Alarm Linkage

Recording Stream, Modes

Simultaneous Playback

Playback Search

Playback Function

Decoding

PoE Interface / Port

Network Protocol

Network Bandwidth

Mobile Device

SATA HDD Storage

Backup

Local Backup

Port RS 485

USB

Remote Control

Power Consumption / Supply

Dimensions / Weight

8 IP Channels up to 8 MegaPixel / IP Panel Input

8MP/ 6MP/5MP/4MP/3MP/1080P/1280×1024/960P/720P/960H/D1/CIF

HDMI x 1: 3840 x 2160 (@60fps) / 3840 x 2160 (@30fps) / 1920 x 1080 / 1280 x 1024 /

1024 x 768, VGA x 1: 1920 x 1080 / 1280 x 1024 / 1024 x 768

Pentaplex: Live Disp./Record/Playback/Backup/Remote Access

H.265+ / H.265 / H.264

Embedded Linux

240fps (30fps per channel)

YES - Audio In 1 RCA / Audio Out 1 RCA

8CH / 4 Groups / 20,000 Face Pics / Add, Modify, Delete and Search

Face Pics by Time Camera / Event / Temperature / Mask

Add w/ App, Web, Ext. Import w/ 128×128 Res. - 1920×1080 (jpg ≤ 150KB)

Temp. Exception Alarm / Allow List / Block List / VIP

Stat. Info. by Day, Week, Month, Quarter and Custom Period in Bar Graph or Pie Chart

8 Ch. / Temp. Measurement [F / C], Face Recognition (w/ Masks)

Time Sliced Image, Time / Calendar, Event (Motion, Ext. Alarm), Tag

Sensor/Motion Detection, A.I. Event, Temperature Exception, Mask Off

Record, PTZ, Cruise, Alarm Out, Pop-up Window, Email, Buzzer, App Push

Dual Stream Recording, Manual / Timer / Motion / Sensor / Analytics

Max 8 Channels

Highlighted Color to Display Certain Time Period Recording -- Dif. Colors for Dif. Events

Play, Pause, FF, FB, Digital Zoom

Live View / Playback - 1 Ch. 8MP / 4 Ch. 1080P

RJ45 1000Mbps x 1, RJ45 x 8(IEEE802.3af; output pwr:≤80W)

TCP/IP, DHCP, DNS, DDNS, UPnP, NTP, SMTP, HTTP, HTTPs, 802.1x

80Mbps Incoming / 80Mbps Outgoing

iOS, Android

SATA x 1 (Max 10TB)

Network, USB

U Disk, USB Mobile HDD

Yes (full-duplex), connect to PTZ or keyboard

USB 2.0 x 1, USB 3.0 × 1

Optional

≤ 15W (Without HDD and Poe Pwr Supply) / 48V / 2.5A

11.81 × 9.78 ×1.77” / 300 × 249 × 45mm ( W × D × H ) 2.2lbs / 1kg

*Please research local, state, and federal laws regarding audio surveillance

10 11

ALSO CONSIDER THESE OTHER GREAT

TRANSCENDENT THERMAL AND TEMP.

SCREENING IP PRODUCTS!

Optional Desk/

Counter Mount

Available.

Optional Wall

& Pole Mounts

Available.

VT-TSP8: Transcendent Series 2 MP Temperature

Screening Camera with 8-inch Display Panel

VT-TNB5TH: Transcendent Series 5 MegaPixel

Bi-Spectrum Long-Range Thermal WDR IP

Motorized Bullet Camera, w/ VT-BB501 Blackbody

Temperature Calibration Device (sold separately)

Also Consider Vitek Wireless Access Points to

Reduce Costly Cable Installation!

VT-WAP1150 and VT-WAP2150 High Speed 5.8GHz DIP AP /

CPE Wireless Bridge w/ 8MB Storage, 64MB RAM, 150MBps

transmission, and Point-to-Multi-Point (P2MP) Topology

With high speed transmission of 150Mbps and a wireless range

of 3000ft. (VT-WAP1150) and 1.25 miles (VT-WAP2150) these

products eliminate the need for expensive and troublesome long-

distance cables in areas where CCTV monitoring and rigorous

surveillance take place. These small, lightweight and durable units are

easy to install and easy to use with an innovative and straitghtforward

10-button plug-and-play dip switch that facilitates the creation of a

robust wireless network without a computer. Set-up can be simply

configured for point-to-point or point-to-multipoint topology depending

on the application, with up to 128 IP group configurations!

VT-WAP1150

VT-WAP2150

12 PB

LIMITED PRODUCT

WARRANTY

This VITEK product carries a two (2) year limited warranty. VITEK

warrants to the purchaser that products manufactured by VITEK are free

of any rightful claim of infringement or the like, and when used in the

manner intended, will be free of defects in materials and workmanship for

a period of two (2) years, or as otherwise stated above, from the date of

purchase by the end user. This warranty is nontransferable and extends

only to the original buyer or end user customer of a VITEK Authorized

Reseller.

The product must have been used only for its intended purpose, and

not been subjected to damage by misuse, willful or accidental damage,

caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the

guarantee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become necessary.

28492 CONSTELLATION ROAD VALENCIA, CA 91355

WWW.VITEKCCTV.COM

Version 2.0

July 2020

CLASS A DIGITAL DEVICE (INDUSTRIAL & COMMERCIAL ENVIRONMENT)

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to CE and FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harm-

ful interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct

Vitek VT-TNR818PTH Quick start guide

Vitek VT-TNR818PTH Quick start guide

Vitek VT-TNR818PTH Quick start guide

Related papers

Other documents