Easybike G3 User manual

com.int-easybike.www

0 page

Electric Scooter

model G3

User manual

Pleas ready carefully before use.

easybike israel -ultra light mobility

Golan 62, Nirit,44805 , ISRAEL

03-9382567,054-6648155

com.int-easybike.www

1 page

com.int-easybike.www

2 page

1. THE RIDING RULE

o the G3 design for use any age begin 9 years old.

o No need driver license , insurance not must.

o must use hamlet

o The riding allowed on pavement and special sign line for bicycle

o Not allow to ride on highway or fast road

o The max speed possible is 28 km/h but limit by country regulation.

o avoid ride on slip road , oil , sandy road , grass area

o make sure the air pressures is 40PSI (+- 5 PSI)

o always hold the handlebar with two hand

o do not use this scooter for jumping, racing etc

o For one rider only .

o in dark light use the front light and rear light

o Follow carefully your country / city rule

o use front brake very carefully , slow and soft tuch.

befor your ride check your scooter stability , every thing must be very tightening ,

no shake. If you find any part not tightening correct please use our service. we

like you to be very safe using our product.

______________________________________________________________________

com.int-easybike.www

3 page

How to fold the scooter

push up by hand the top neck closer.

move the closer to the top inside the hole .

pull backward . please watch our video

search YouTube for "G3 EASYBIKE" .

OPERATE THE G3 SCOOTER

The G3 controlled by Remote key for turn on/OFF and alarm

turn on : double click on the electric sign.

Turn Off : One click on the the lock open key.

Alarm on : click on the Lock close key.

Locate your scooter : click on the red bell.

When the dispay is on the scooter ready to go.

each scooter come with two remote key.

com.int-easybike.www

4 page

Display function

the green led use for battery level indicator

the blue led use to controll the riding option .

Mode a: the max speed is 6 km/h . you must push the scooter first to enable the

throttel to work.

Mode b: the max speed is 12 km/h . you must push the scooter first to enable the

throttel to work.

Mode c: the max speed is 28 km/h (no need to push) - low acceleration .

Mode d : the max speed is 28 km/h (no need to push) - high acceleration.

Mode c and d can be preset for the folowing speed : 12 , 20 , 28. (km/h)

the default speed for c and d is 12 km/h.

how to change the speed for c or d .

the max speed preset according the the country regulation.

click the mode til the c led is on.

pull the brake lever + push the throotle for 5 sec.

the speed will set from 12 to 20.

do it again and the speed will set to 28 km/h.

same idea for d . do it again the speed will be 12 etc.

Battery level indicator.

Cut off votage

the scooter cut off voltage to protect the battery . for the controller it is 33v .

for the battery the cut off is 29v

the scooter will lower the speed to 12 km/h when the voltage come to 33v.

at the end , the battery led will all flash this is sign to the battery ended.

you will have 100-200 meter to end it.

led voltage

4 39-42

3 36-39

2 32-36

1 <=32

com.int-easybike.www

5 page

Handlebar

the throotle located on the right side

change the handlebar high

change the handlebar height

each steering stem can be move up and down .

you have two quick clamp to set . open the clamps to change .

close the clamp to set.

please make sure the clamp tightening strongly.

do not up the stem too high .

the correct high is according the the rider comfort .

com.int-easybike.www

6 page

Using Brake

the G3 come with double disk brake front and rear.

Using the front brake must be very careful because it is very strong brake.

use it soft touch and slow. make sure the front wheel never block.

Never use the front only to brake. more safe is to use only the rear brake and add

the front only if you need very fast stop.

always keep good distance in front to other vehicle to enable safe stop.

since the rider center of gravity is high it is good practice to lay down when use

the front brake for fast stop . otherwise you can loose the control , the rear wheel

can go up quickly if use the front brake too strong.

Adjast and clean the brake

the brake pads need to be clean . dust and sand can come inside and make

noise and damage the brake operation.

clean the brake with degreaser . the degreaser remove the oil out ,then you can

use water with press machine or air compressor.

Adast the brake must be done only by technical professional people.

Never ride the scooter if the brake not operate correct 100% .

good adjust is critical . the brake pads have limit life . replace the pads if need.

don't wait till the pad too thin .

the brake lever must come back when not in use. if the lever not come back

totally the motor will not run.

each brake lever connect with wire to the controller . when you pull the lever the

motor stop.

if the brake lever damaged please replace with new one.

com.int-easybike.www

7 page

BATTERY AND CHARGING

To charge the battery use the original changer from easybike. this charger is set

specially to the battery . use SANS model

SSLC084V42

for 36v battery.

charge time : 4.5 hours when the battery is

new

during the time the battery capacity get

lower . the charging time reduce according

to the battry capacity.

NO NEED AND BETTER NOT TO DISCHARGE fULLY.

when ever you can you can charge.

the led on the charge become red when charging. once it is become green the

battery is full.

using diffrent charger then the one you got with your scooter will avoide your

warranty for the battery, also this can be dangerous for the battery.

keep the rule to save your life and your battery.

please read the charger manual carfully.

Storage : the best voltage for long stroage is 70% of the capacity.

if the battery fully charge the life will be shorter.

please reae more about how to keep the battry best in our website.

befor first ride please charge the battery fully. (2-4 hours)

com.int-easybike.www

8 page

Battery safe instruction :

• This appliance includes Li-Ion batteries;

do not incinerate batteries or expose to high temperatures, as they may explode.

• Shorting the battery terminals may cause burns or fire.

• Do not place battery pack on wet or metallic surfaces.

• When you dispose of the appliance remove the battery and dispose of the

battery safely in accordance with local regulations.

• You must always use the battery in accordance with the instructions on the

battery label.

• Liquid ejected from the battery may cause irritation or burns.

• Leaks from the battery cells can occur under extreme conditions. Do not touch

any liquid that leaks from the battery. If the liquid gets on the skin wash

immediately with soap and water. If the liquid gets into the eyes, flush them

immediately with clean water for a minimum of 10 minutes and seek medical

attention. Wear gloves to handle the battery and dispose of immediately in

accordance with local regulations.

ship BATTERY by air :

The batteries are considered to be dangerous by the

INTERNATIONAL MARITIME DANGEROURS GOODS regulation ( IMDG ) .Batteries

shall be shipped as class 9 hazardous materials.

However, if those lithium ion battery or cells are pack with or contained in an

equipment, then it is the responsibility of the shipper to ensure that the

consignment are packed for that consignment to be declared as

“NOT RESTRICTED” (non-hazardous / non-dangerous) or “DANGEROUS GOODS”.

CHARGING :

use only the charger you got with

the product .

the charger led light red when

charge and green mean no charge

the charger automatic stop the

charging once the battery fully

charge.

wheels and tire

keep the air pressure 40psi

com.int-easybike.www

9 page

if the air pressure less then 40psi the battery will work much harder , the range will

be shorter and the life of the battery will be much shorter.

replace the tire if need.

7. USER MAINTENANCE *

Many parts on your E-SCOOTER are subject to a higher degree of wear due to

their function and depending on their use.

Have your E-SCOOTER checked regularly at a professional e-bike shop and have

any worn parts replaced.

After an accident or crash you must take your E-SCOOTER to a bike repair

specialist to make sure that it is safe to ride. Be aware that damage may not be

visible. Failure to do this may result in serious injury.

Any form of crack, scratches or change of colouring in highly stressed areas

indicate

that the life expectancy of the part has been reached and it should be

replaced immediately. Ensure the battery is removed from the bike before

carrying out any maintenance. Make sure that all screws and bolts are tightened

securely and to the prescribed tightening torques before riding. You must always

use genuine replacement

parts when performing maintenance on your E-SCOOTER.

Regularly check the tyre pressures minimum 35psi, maximum 45psi and regularly

check the tread depth of tyres.

Personal Safety:

• This e-scooter is intended for use as a commuter and leisure e-scooter.

Using the e-scooter for any

other purpose may result in serious injury.

• Before you ride this e-scooter in a busy area or on

public roads, practice riding in a safe area free

from hazards. Take time to learn the e-scooter’s

controls and power.

• It is your responsibility to identify and follow all

local laws and regulations, including fitting your

e-scooter with any additional equipment necessary

to comply with local laws.

• Observe the applicable traffic regulations.

• At night your e-scooter MUST have white front and

com.int-easybike.www

10 page

red rear lights lit. It MUST also be fitted with a

red rear reflector and amber pedal reflectors

which are both supplied.

• Never ride with no hands.

• Adopt a speed that reflects the terrain as well

as your riding ability.

• Use designated cycle paths when not using

public roads.

• When riding your e-scooter, wear close-fitting

trousers, or use a e-scooter clip. Loose clothing

can get between moving parts and cause injury.

• Wear bright and/or reflective clothing when

cycling.

• When riding your e-scooter, you should wear a

e-scooter helmet that conforms to

current regulations.

• Your e-scooter saddle should be as close as

possible to horizontal. Do not tilt the saddle

backwards, as this can lead to back pain and

physical injury.

• Take care when loading your e-scooter into a car or

when mounting it on a e-scooter carrier.

• We DO NOT recommend that you use a e-scooter

trailer with your Easybike e-scooter.

• You can fit a standard fitment luggage carrier to

your e-scooter. Please check with the manufacturer

to make sure that a child seat can be safely

attached to the luggage carrier.

e-scooter Safety:

• You must be over 16 to ride an e-scooter.

• The drive assist system is limited to a maximum

continuous power rating of 0,25kW (250W) and

a maximum speed of 25Km/h, (15.5 mph).

• Your e-scooter is designed for a maximum

permitted overall weight (rider + luggage +

e-scooter) of 110kg. The maximum permitted

weight of the rider (90kg) plus luggage (20kg)

is 110kg.

• Do not submerge your e-scooter in water.

• Be aware that the speed at which you are

travelling may be faster than you are used to,

especially when accelerating.

Electrical Safety:

• Only use batteries and chargers supplied by

Easybike.

com.int-easybike.www

11 page

• Never modify the charger in any way.

• The charger has been designed for a specific

voltage, always check that the mains voltage is

the same as that stated on the rating label.

A charger that is suitable for one type of battery

pack may create a risk of fire when used with

another battery pack; never use the charger

with another appliance or attempt to charge

this product with another charger.

• Before use, check the charger cord for signs

of damage or ageing. A damaged or entangled

charger cord increases the risk of fire and

electric shock.

com.int-easybike.www

12 page

G3 e-scooter specfication

Performace

item Description spec comment

Weight according

to battery

selected

from 12kg to

16kg

according to battery

Speed 4 option for

max speed

preset

6 , 12 , 25 , 28

km/h

Can be set by the

customer or preset

according to country

regulation

Range According

to battery

36v 8.8Ah 25km Flat road , no stop , 75kg ,

no wind .

36v 17Ah 50km

48v 8.8A 30km

48v 17Ah 60KM

Battery cycle life

see battery

spec and

warranty

terms

document

500 cycle If folow the instruction

Motor power nominal 250w

Electric

item Description spec comment

BLDC gear Motor Rear Cast hub

motor

Nominal 250w According to

country regulation

Max 18A

com.int-easybike.www

13 page

36v / 48V

Battery Samsung sdi

18650 22p

Li-on battery

ncm chines

brand

36v , 8.8A Standard

Li-on battery 36v , 17A Option 1

Li-on battery 48v , 8.8A Option 2

Li-on battery 48v , 17A Option 3

Controller DHMC Intelligent 15A 36v / 48v wire for Alarm

Alarm cut off the

motor

power switch logical switch

charger socket

display king-meter led

with multy

function *

charger sans 2A

charer

110-240v , 50-

60-Hz

chare time 4.5H for

8.8A battery

cherger wall plug

per customer

country

need to specify

light front led light

+ horn

com.int-easybike.www

14 page

body and forks

Item Description

spec comment

Alloy 6005 / 6061

/ 6063 T6

made with

extrusion +

CNC ALL

ASSY by

screw

Can ship without assembly

Water proof 95%

Screw High

quality

stainless

steel screw

M6 , M5 with

lock

All stainless

steel

Finish treatment T4,T6 Anodize sand

black/silver

head set

sealed bell

bearing

(taiwan

made)

Size and wheels

item Description

spec comment

fold size Yes Fold size

130x30x50cm

Open size 130x30x160cm

pack size carton size 42x30x106 cm

Wheels Fron and

rear cast

alluminium

12"

com.int-easybike.www

15 page

Tire Standard

Option

Kenda 12 1/2

x 2.125

Tire option INNOVA 12

1/2 X 3"

Need to order in advance

length Distance

between

wheel

center

960 mm

Brake

Item Description

spec comment

brake lever Wuxing

Rear braek Disk Tektro novella

disk 160mm

standard

Front brake ready for

Disk

Tektro novela

disk 160mm

Optional

Board option

Item Description

spec comment

no Board scooter

body

width 160mm standard

Bamboo,Mayple

5 layer

carbonize

wood

Wide

board

8mm

thickness ,

width 260mm

Option

Bamboo,Mayple

5 layer

carbonize wood

nerrow

board

8mm

thickness ,

width 200mm

Option

com.int-easybike.www

16 page

Easybike G3 User manual

Easybike G3 User manual

Related papers

Other documents