ElectrIQ E-SC10 User manual

Category
Scooters
Type
User manual
USER MANUAL
ELECTRIC SCOOTER
E-SC10
Thank you for choosing electriQ
Please read the manual before using this scooter and keep it safe for future reference.
Visit our page www.electriQ.co.uk for our entire product range
2
CONTENTS
SAFETY WARNINGS
3
SCOOTER DIAGRAM
5
ASSEMBLY
6
FOLDING AND UNFOLDING THE SCOOTER
7
DISPLAY OVERVIEW
8
FIRST USE
9
HOW TO RIDE
9
MAINTENANCE
9
STORAGE
10
TECHNICAL SPECIFICATIONS
10
SUPPORT
11
3
SAFETY WARNINGS
Carefully read the user manual before use to avoid the risk of injury. Keep the
user manual safe for future reference.
The scooter can only be used by people aged 14 years old and over. Persons with
reduced physical, sensory or mental capabilities or who lack experience and
knowledge can also use this scooter if they are supervised, or have been given the
correct instructions concerning the use of the scooter and understand the hazards
involved.
Do not leave children unattended with the scooter.
Cleaning and user maintenance must not be performed by a child under the age
of 14 unless supervised by an adult.
The user is responsible for all consequences from improper use of the scooter.
The scooter is for personal use only, and must be operated in accordance with
current local legislation.
Only one person can use the scooter at a time.
Inspect the scooter before use. Do not attempt operation if any damage is found
or suspected.
Keep fingers clear of the folding mechanism when folding or unfolding the electric
scooter.
Do not allow children to fold or unfold the scooter.
This scooter is to be ridden responsibly. If you lose control you could cause
serious injury.
Wear suitable clothing and footwear, including, but not limited to: flat shoes,
helmet, knee protectors and elbow protectors.
Do not ride after consuming alcohol, or under the influence of drugs.
Verify that use of the scooter is allowed in the area you wish to ride.
Do not use the scooter at night, or when visibility is low.
Always check the battery level using the display. If the battery is low, the scooter
might stop suddenly and cause injury.
The scooter is designed to be used on smooth flat ground.
Do not use the scooter in wet conditions, including snow, mud and ice.
Maintain a slow speed if travelling downhill. Use both brakes together to stop
from high speeds.
Do not carry children while using the scooter.
This scooter is not a toy.
The maximum speed and range will be dependant on the weight and size of the
user, as well as environmental conditions, and driving style.
Pictures and information in this manual may vary from the product, due to
continuous product improvement.
4
BATTERY SAFETY
The scooter comes supplied with a lithium battery. Care must be taken with the
battery and charging to maintain its lifespan.
Do not expose the scooter or battery to naked flames or extreme heat.
Do not expose the scooter or battery to extreme cold.
Do not allow moisture to enter the battery compartment or charging port.
Only use the provided charger.
Do not overcharge the battery or leave unattended whilst charging.
The battery must be removed if disposing of the product.
The battery is to be disposed of safely.
Lithium batteries are considered dangerous goods. Check your countries laws on
transportation and use.
5
SCOOTER DIAGRAM
Handlebar Stem
Handlebar Buckle
6
ASSEMBLY
Ensure that the mini scooter is fully assembled before operating.
Step on the deck of the unit and
lift the handlebar stem firmly to
detach from the deck.
Remove the rubber plugs on both sides of
the front wheel forks, then unfasten the
front axle with the two 6mm wrenches
provided.
When installing the front wheel pay
attention to the direction of the tread,
ensuring it matches the image with the
valve on the right. Once you have
confirmed it is the correct way round,
the front axle can then be tightened.
7
HANDLE ASSEMBLY
Fully tighten the handlebars on to
each side of the handlebar stem,
Ensuring that the right handle is
attached to the right side, and the
left handle is attached to the left.
UNFOLDING YOUR SCOOTER
Lift up the handlebar stem until the
folding hook releases from the hook hole
on the back fender.
Fully raise the handlebar stem, then
Lock the handlebar stem into place
using the handlebar buckle. Ensure a
clicking sound is heard and that the
buckle is secure.
FOLDING YOUR SCOOTER
Carefully lift up the handlebar buckle,
and pull it away from the handlebar
stem. Then gently lower the handlebar
stem until the folding hook is fixed
securely into the hook hole.
8
DISPLAY OVERVIEW
POWER
BUTTON
Press and hold for 3 seconds to turn the scooter ON or OFF.
HEADLIGHT
Press the power button twice to turn on the headlight.
Turn it off by pressing the power button twice.
The headlight symbol will illuminate on the display when
the lights are on.
MODE
BUTTON
When the scooter is on, press the MODE button to
change between the speed modes: Low speed, Medium
speed and high speed. The currently selected mode will
be shown by the colour of the speed symbol.
SPEED
INDICATOR
The colour of the SPEED INDICATOR shows the mode
currently selected.
WHITE: Low speed mode, max speed is 10km/h.
YELLOW: Mid speed mode, max speed is 20km/h.
RED: High speed mode, max speed is 25km/h.
BATTERY
LEVEL
The display will indicate the current battery level. You should
avoid riding the scooter when the battery level drops below
25%.
75%-100% 50%-75% 25%-50% 0%-25%
9
FIRST USE
IMPORTANT: Before using the scooter for the first time, fully charge the battery. After
turning on the scooter, check the battery power on the display and verify that all lights are
working.
Remove the protective cover from the charging port on the scooter.
Ensure that the charging port is dry and not damaged before inserting the charger into
the port. (Refer to the scooter diagram for location).
When the indicator on the charger is red, the scooter is charging.
The indicator light on the charger will turn green when the battery is fully charged.
This usually takes 5-6 hours.
Do not over charge as long-term battery life may be affected. Do not leave unattended
while charging.
When charging has completed, remove the charger and ensure that the protective
cover is placed securely over the charging port.
HOW TO RIDE
IMPORTANT: Ensure all locking devices are secure and the scooter is stable before riding.
This scooter is a toy and should be used as such. Do not ride in public areas. Adult
supervision is required at all times.
1. Place one foot firmly on the deck, keeping your other foot on the ground for balance.
Press the power button for 3 seconds to turn on the scooter.
2. Hold the handle bars with both hands and gently push the scooter forward. When you
have gained a steady speed, gently press the accelerator and place both feet on the
deck.
3. Press the mode button to change the max speed of the scooter. See display overview
for more information.
4. Gently pressing the electronic brake and the rear brake will slow the scooter to a stop.
5. If the scooter displays that the battery is low, please charge the scooter. Do not run the
scooter on low battery.
6. Press the power button for 3 seconds to turn off the scooter.
7. When the scooter has stopped, remove your feet one by one.
MAINTENANCE
The scooter requires routine cleaning and maintenance.
Before any work is carried out on the scooter, ensure that the charging cable is not
connected and that the scooter is powered off.
To clean the scooter, wipe the exterior with a soft damp cloth, then dry immediately.
The exterior of the scooter is splash proof with an ingress rating of IPX4. The scooter is
water resistant, but not waterproof, never submerge the scooter, and do not ride in
heavily dusty areas. Care should be taken to avoid mud, large puddles, avoid adverse
weather.
Do not allow water to get inside of the scooter. There is a high risk of the internal
electronics becoming permanently damaged.
The tyres on the scooter must be regularly checked for damage.
10
STORAGE
To protect the battery, ensure it is charged for at least an hour before storage. If you
plan on storing the scooter for a prolonged period, the scooter should be charged
every 2 months to avoid deterioration of the battery. Do not store the scooter at less
than 7⁰C or above 25⁰C
Keep the scooter inside its own packaging, or cover it to prevent dust build up.
Keep the scooter indoors at all times when not in use.
TECHNICAL SPECIFICATIONS
Model name
E-SC10
Maximum loading
120 kg
Maximum speed
25km/h
Maximum Range
16km
Motor power
250W
Climbing gradient
20
Power supply
AC 110-240V, 50/60Hz
Body dimensions
1065 x 430 x 1180 mm
Folded body dimensions
1065 x 430 x 480 mm
Net weight
11.9 kg
Tyre type
Front air tyre, back motor is solid tyre.
BATTERY SPECIFICATIONS
Battery
5.0 Ah 36V Lithium Battery
Charging time
3.5 hours
Voltage
36 V
Initial Capacity
5000 mAh
Working Temperature
-15 - 40
Charging Temperature
0 - 40
Storage Time
6 months
Storage Temperature
-20 - 25
Storage Humidity
5 % -95 %
11
electriQ UK SUPPORT.
0330 390 3061
Office hours: 9AM - 5PM Monday to Friday
www.electriQ.co.uk
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
PRODUCT DISPOSAL
Do not dispose this product as unsorted municipal waste. Collection of such
waste must be handled separately as special treatment is necessary.
Recycling facilities are now available for all customers at which you can deposit
your old electrical products. Customers will be able to take any old electrical
equipment to participating civic amenity sites run by their local councils.
Please remember that this equipment will be further handled during the
recycling process, so please be considerate when depositing your equipment.
Please contact the local council for details of your local household waste
collection service
12
V20200819
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

ElectrIQ E-SC10 User manual

Category
Scooters
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI