Meka Electric 60W-1 User manual

Brand: Meka Electric

Model: 60W-1

Type: User manual

Tap + to add

Way one

Add manually

Way two

Auto scan

-Stable Wi-Fi network which could access to

the device.

-A smart phone is running iOS 8 or higher or

Android 4.1 or higher.

-Install the bulb in an E26 socket

Smart Light Bulb

White LED Light

USER MANUAL

Get to Know Your Smart Bulb

A smart light bulb is easily dim or brighten,

change color, turn on or off via remote control

with onn. Smart Home app. No hub needed. It

is also available to be controlled by voice and be

compatible with Google/Alexa/Siri to build your

smart home.

The Specs

White LED Light

Size 60x117mm(2*4in

15,000 hour life

WiFi:IEEE 802 11 N, 2 4GHz

110-130V AC, 60Hz

Scan the QR code below to download the Smart

Home app or download the it from APP Store or

Google Play.

Open the Smart Life app, tap "Register" to register

an account, then sign in the app. Add the device, as

the following picture shows.

Make your router, cellphone, and device are as close

as possible. Before connecting, enable bluetooth of

cellphone.

Make sure you're connecting to a 2.4GHz Wi-Fi

network. (lt can't connect to 5GHz networks)

Turn on the bulb 3 times(on-off-on-off-on), confirm

light bulb is flickering rapidly. (2 times per second).

Note: if network configuration takes more than 8

minutes or fails. Reset the bulb(turn on the bulb 3

times again as mentioned above).

There are two ways to connect with the bulb, one is

Add manually, the other is Auto scan

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential

installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and

receiver.

-Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be installed and

operated with minimum distance 20cm between the

radiator & your body.

RF Exposure: A distance of 20cm shall be

maintained between the antenna and users, and the

transmitter module may not be co-located with any

other transmitter or antenna.

Any changes or modifications not expressly

approved by the party responsible for compliance

could void the user's authority to operate this

equipment.

This device complies with Part 15 of the FCC Rules

Operation is subject to the following two conditions:

(1) this device may not cause harmful

-Consult the dealer or an experienced radio/TV

technician for help.

interference, and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

Need help?

We're here for you every day from 7 a.m.- 9 p.m. CST.

Give us a call at 1-888-516-2630

”ONLY USE THE CONTROL PROVIDED WITH OR

SPECIFIED BY THESE INSTRUCTIONS TO

CONTROLTHIS LAMP.THIS LAMP WILL NOT

OPERATE PROPERLY WHEN CONNECTED TO

ASTANDARD(INCANDESCENT)DIMMER OR

DIMMING CONTROL.”

RISK OF ELECTRIC SHOCK - DO NOT USE

WHERE DIRECTLY EXPOSED TO WATER

1 5 6 7

8910234

Let’s Get Started

Here’s what you’ll

need to get set up

01 02

Add Your Device

The Fine Print The Fine Print The Fine Print

Create Connection

But Wait....There’s More

Follow the pictures to create

connection for the bulb

You can control the brightness

in Dimmer model and choose

different scene in scene mode.

Federal Communication Commission

Interference Statement: FCC Radiation Exposure Statement:

Non-modification Statement:

FCC Compliance Statement:

NOT FOR EMERGENCY LIGHTING

E26 socket

CAUTION

Meka Electric 60W-1 User manual

Brand: Meka Electric

Model: 60W-1

Type: User manual

Download PDF

report

Meka Electric 60W-1 User manual

Meka Electric 60W-1 User manual

Related papers

Other documents