Meka Electric Multi-Color LED Light Smart Bulb User manual

Brand: Meka Electric

Model: Multi-Color LED Light Smart Bulb

Type: User manual

”ONLY USE THE CONTROL PROVIDED WITH OR

SPECIFIED BY THESE INSTRUCTIONS TO

CONTROLTHIS LAMP.THIS LAMP WILL NOT

OPERATE PROPERLY WHEN CONNECTED TO

ASTANDARD(INCANDESCENT)DIMMER OR

DIMMING CONTROL.”

RISK OF ELECTRIC SHOCK - DO NOT USE WHERE

DIRECTLY EXPOSED TO WATER

NOT FOR EMERGENCY LIGHTING

CAUTION

-Stable Wi-Fi network which could access to the

device.

-A smart phone is running iOS 8 or higher or

Android 4.1 or higher.

-Install the bulb in an E26 socket

E26 socket

Need help?

We're here for you every day from 7 a.m.- 9 p.m.

CST.

Give us a call at 18885162630

But Wait....There’s More

A smart light bulb is easily dim or brighten,

change color, turn on or o via remote control

with onn. Smart Home app. No hub needed.

It is also available to be controlled by voice

and be compatible with Google/Alexa/Siri to

build your smart home.

Get to Know Your Smart Bulb

The Specs

Multi-Color LED light

Size: 60x118mm(2*4in

15,000 hour life

WiFi:IEEE 802 11 N, 2 4GHz

110130V AC, 60Hz

Scan the QR code below to download the Smart

Home app or download the it from APP Store or

Google Play.

Open the Smart Life app, tap "Register" to register

an account, then sign in the app. Add the device,

as the following picture shows.

Make your router, cellphone, and device are as

close as possible. Before connecting, enable

bluetooth of cellphone.

Make sure you're connecting to a 2.4GHz Wi-Fi

network. (lt can't connect to 5GHz networks)

Turn on the bulb 3 times(on-o-on-o-on), conirm

light bulb is lickering rapidly. (2 times per

second).

Note: if network coniguration takes more than 8

minutes or fails. Reset the bulb(turn on the bulb 3

times again as mentioned above).

There are two ways to connect with the bulb, one

is Add manually, the other is Auto scan

Also, you can choose dierent scene in scene

mode.

In music model, the color is available to be

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be installed

and operated with minimum distance 20cm

between the radiator & your body.

Any changes or modiications not expressly

approved by the party responsible for compliance

could void the user's authority to operate this

equipment.

Federal Communication Commission

Interference Statement:

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates uses and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment o and on, the user is encouraged

to try to correct the interference by one or more

of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment

and receiver.

-Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules

Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference,

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

1 5 6 7

8910234

Let’s Get Started

Here’s what you’ll

need to get set up

Add Your Device

01 02

Add Your Device

The Fine Print The Fine Print

Create Connection

Way one

Add manually

Tap + to add

Way two

Auto scan

Follow the pictures to create

connection for the bulb

You can control the brightness

and change color in Dimmer model.

FCC Radiation Exposure Statement:

Non-modiication Statement:

FCC Compliance Statement:

Smart Light Bulb

Multi-Color LED Light

USER MANUAL

FPO

Meka Electric Multi-Color LED Light Smart Bulb User manual

Brand: Meka Electric

Model: Multi-Color LED Light Smart Bulb

Type: User manual

Download PDF

report

Meka Electric Multi-Color LED Light Smart Bulb User manual

Meka Electric Multi-Color LED Light Smart Bulb User manual

Related papers

Other documents