Installation Instructions
Windshield Channel Header (No Drill), Black,
97-06 Jeep Wrangler
Hardware List
A) 1-Windshield Retainer
B) 2- Brackets
C) 2- Bolts
D) 2- Washers
INSTALLATION INSTRUCTIONS
1. Remove any hard or soft top currently on your Jeep.
2. Place the Windshield Retainer above the windshield as shown. (fig’s. 1,2)
fig. 1 fig. 2
3. Unbolt two Brackets from the Windshield Retainer (fig. 3), insert them into slots in Jeep (fig. 4),
and bolt them back to the Windshield Retainer (fig.5). To assure a good seal, apply firm
pressure to the Windshield Retainer downward and toward the Jeep’s front while bolting.
f
ig. 3 fig.4 fig. 5
Rampage Products
9225 Stellar Court Unit C, Corona, CA 92883-4919, U.S.A.
Phone: (951) 277-4949 Fax: (951) 277-2295
e-mail: [email protected]
Web: www.rampageproducts.net
Made in China
Part 901004
/
