2. RAMPAGE PRODUCTS
  3. 901004

RAMPAGE PRODUCTS 901004 Installation guide

  • Hello! I've reviewed the installation instructions for the Windshield Channel Header for the 97-06 Jeep Wrangler. This document outlines the steps for a no-drill installation, including how to attach the windshield retainer and brackets. I can help answer your questions about the installation process or the included hardware.
  • What is the first step in the installation process?
    What hardware is included with the Windshield Channel Header?
    What should be done while bolting for a good seal?
Installation Instructions
Windshield Channel Header (No Drill), Black,
97-06 Jeep Wrangler
Hardware List
A) 1-Windshield Retainer
B) 2- Brackets
C) 2- Bolts
D) 2- Washers
INSTALLATION INSTRUCTIONS
1. Remove any hard or soft top currently on your Jeep.
2. Place the Windshield Retainer above the windshield as shown. (fig’s. 1,2)
fig. 1 fig. 2
3. Unbolt two Brackets from the Windshield Retainer (fig. 3), insert them into slots in Jeep (fig. 4),
and bolt them back to the Windshield Retainer (fig.5). To assure a good seal, apply firm
pressure to the Windshield Retainer downward and toward the Jeep’s front while bolting.
f
ig. 3 fig.4 fig. 5
Rampage Products
9225 Stellar Court Unit C, Corona, CA 92883-4919, U.S.A.
Phone: (951) 277-4949 Fax: (951) 277-2295
e-mail: [email protected]
Web: www.rampageproducts.net
Made in China
Part 901004
/