KickAss KACOMP600-LI User manual

Brand: KickAss

Model: KACOMP600-LI

Type: User manual

KickAss KACOMP600-LI is a portable power station packing a 512Wh battery, capable of powering your devices and appliances during outages, camping, or other off-grid adventures. Featuring multiple outputs, including 230V AC sockets, USB ports, and DC jacks, it can charge phones, laptops, power tools, and more. Its compact size and integrated LED light make it easy to carry and use in various situations. The clear LCD display provides real-time information on battery status, input/output power, and more.

V0.8

COMPACT-600

LITHIUM

POWER STATION

USER MANUAL

KACOMP600-LI

SAFETY INSTRUCTIONS

Before using your COMPACT-600 for the ﬁrst time, give it a full charge.

Please charge COMPACT-600 every three months to preserve the battery health.

ŸDo not alter or remove the factory plates or identiﬁcation labels.

ŸDo not disassemble the device.

ŸDo not place the unit close to or in a ﬁre or expose it to heat.

ŸKeep out of direct sunlight.

ŸDo not connect the output to mains power under any circumstances.

ŸDo not touch the unit or the plug in points if your hands are wet.

ŸDo not connect any metallic objects to the AC input or output.

ŸDo not move the unit if it is recharging or in use.

ŸDo not operate the unit above the speciﬁed input voltage.

ŸDo not charge the unit via power supply systems that operate outside 100-240V.

ŸUse and store the unit only in a clean and dry environment.

ŸCheck the unit prior to every use, Do not use the unit if it is damaged or broken.

ŸKeep the unit away from children. Do not let children use the device.

ŸKeep this product away from pets.

ŸIf rust, odors, overheating or other abnormal circumstances are observed, stop using the unit

immediately and contact KickAss Products Warranty Team.

ŸThe unit complies with all legal requirements for transport of dangerous goods.

ŸMake sure the unit is properly secured when transporting it in a motor vehicle.

ŸOnly charge, use and store the unit within the temperature range deﬁned in the product

speciﬁcations.

ŸSwitch the unit oﬀ immediately if it has been dropped or exposed to excessive vibrations.

ŸRead the instruction of the peripheral electronic device before connecting it to the unit.

ŸMake sure to switch oﬀ the peripheral electronic device before you connect to this unit.

ŸThis product is not waterproof and should not be exposed to rain or moist environments.

ŸPlease dispose batteries and electronic goods in accordance with local regulations.

ŸUse only original or certiﬁcated charger and cables.

ŸEnsure cooling-vents are free from dust or debris during operation.

ŸEnsure cooling-vents are free from any form of obstruction during operation.

GENERAL INFORMATION

INTRODUCTION AND OVERVIEW

The KickAss COMPACT 600 Lithium Power Station is an all-in-one Inverter/DCDC charger.

Featuring multiple diﬀerent outlets to power all of your devices and accessories. The KickAss

COMPACT 600 Lithium Power Station is powered by a LiFePO4 12.8V 512Wh internal battery.

Includes a 600W inverter with 2 x 240V outlets. Charge your devices using the 15W

(MAX) Wireless charging or 2 x 5V 2.4A USB sockets, 2 x 18W (MAX) USB QC, 65W (MAX)

USB-C PD and 30W (MAX) USB-C PD. Also features 2 x 6mm 12V 6A DC Jack Outputs, 1 x

12V 12A Cigarette socket and 1 x 12V 25A Anderson style output. Charge the Power Station

using solar, your car alternator or the 12V input via the mini Anderson style connector or 8mm

DC jack input via the AC adapter provided.

The backlit LCD provides real time feedback on the performance of the unit.Displays calculations

of Amps, Volts and Watts plus hours of all DC/AC inputs and outputs.

The KickAss COMPACT 600 Lithium Power Station comes ready to plug & play, with all charging

and adapter cables provided to connect your devices straight out of the box.

LCD DISPLAY

1. OVERLOAD LED: Character is displayed if

the AC output is short circuited or overloaded.

2. LIGHT LED: Displayed when light bar is

turned on.

3. WIRELESS LED: Wireless charging is

enabled.

4. BATTERY POWR INDICATOR LED: Provides

an approximation of the device SOC.

5. SOC LED: Percentage calculation of device

SOC. (Percentage will only be displayed when

switching to display voltage).

6. "888.8" INPUT LED: Displays voltage,

current, power or hour of charging at the input

terminal.

7. INPUT LED: Indicates input values.

8. OUTPUT LED: Indicates output values.

9. HRS LED: Indicates the battery timing of

charging and discharging.

10. WATT LED: Indicates the input and output

power.

11. VOLT LED: Indicates the input and output

voltage.

12. AMP LED: Indicates input and output current.

13. V LED: Indicates value is a Voltage.

14. LOAD OVER-CURRENT LED: Load over-

current, overload, short circuit, input over-

voltage display icon.

15. BMS COMMS LED: Indicates internal

communication failure with the Battery

Management System (BMS).

16. LOW TEMP LED: Indicates internal temperature.

When the LED is solid, it is less than 0°C.

When the LED is ﬂashing, it is less than 10°C.

17. HIGH TEMP LED: Indicates the inverter is

operating above temperature and the device

is temperature protected.

18. "1888.8" OUTPUT LED: Displays the

voltage, current, power and hour of the load

output terminal.

19. "88.8" LED: Displays the percentage of

battery voltage and quantity (press the

function switch button to select).

CONTROL PANEL

2118

17195

15 14 10 11

1.Power Button: Press to turn on the COMPACT 600. One short press will turn the back light on

and oﬀ. One long press (3s and release) will turn the COMPACT 600 oﬀ.

2.Mode Button: Switches the display between Voltage, Current, Power and battery hour.

3.LCD Display: Displays battery voltage, input/output power, display battery percentage, alarms

and error codes.

4.DC Button: Controls DC outputs (6mm DC socket, CIG socket, Anderson Socket). When

enabled and in normal operation, button back-light will be blue. When an over-current or short

circuit occurs, the button back-light will turn red and the LCD will show an error. In an error

condition, all outputs will be disabled. Disconnect and reconnect the load to enable the DC

output.

5.USB button: Controls USB outputs (including wireless charging). When enabled and in normal

operation, the button back-light will be blue and the Wireless Charging LED is displayed on

the LCD screen. No indication is provided for short-circuit or over-current protection. Disconnect

and re-connect with the appropriate load when short-circuit or over-current protection occurs.

6.AC Power Button: Controls AC output. When in normal operation, the button back-light will be

blue. When an over-current or short-circuit condition occurs, the button back-light will turn red

and the error icon LED and OVERLOAD LED will be displayed on the LCD. Disconnect and

re-connect with the appropriate load when short-circuit or over-current protection occurs.

7.LED Lighting Button: Turn on/oﬀ the LED light bar. When on, the LCD screen

displays the lighting icon . The LED light has three modes, low light, bright light and pulse

mode. A short press of the battery light will switch between low light, bright light and oﬀ. A long

press will initiate the pulse mode.

8.8mm DC Jack: AC/DC brick adapter and PWM Solar charging input. Solar input range 15 ~

24Vdc, maximum charging current is 8A. The COMPACT 600 can be charged via a solar panel

within 100W or via the supplied AC/DC brick adapter. When charging, the Battery Power

Indicator LED on the LCD screen will start ﬂashing. When full, the Battery Power Indicator LED

will stop ﬂashing and display full charge. When the input voltage exceeds 30V, the device will

enter over- voltage protection and display the

on the LCD will turn on.

23 22

9. Charge LED Light: Flashes blue when charging, solid when fully charged.

10. Mini Anderson Socket: 12V and MPPT Solar charging input. The COMPACT 600 can be

charged via solar or directly from the vehicle alternator. Solar input voltage 12.5V ~ 60VCD.

Maximum charge current of 15A. Ensure solar input does not exceed 230W. Over-voltage

protection will trigger at 62V, when this occurs the input LEDs on the LCD display will ﬂash.

11. Charge LED Light: Flashes blue when charging, solid when fully charged.

12. 65W TYPE-C Port: Supports 5-20V, 3.25A, with max 65W input. Supports 5V/9V/12V/15V/20V,

3A, with max 65W output. No indication is provided for short-circuit or over-current protection.

Disconnect and re-connect with the appropriate load when short-circuit or over-current protection

occurs.

13. 6mm DC Jack: 2 x 12V 6A - paralleled. When overload or short-circuit event occurs, LCD screen

displays OVERLOAD, error icon and DC LED back-light will turn red. To recover,

disconnect and re-connect the load.

14. Anderson socket: 12V 25A Max Output. When overload or short-circuit event occurs, LCD

screen displays OVERLOAD and error icon . To recover, disconnect and re-connect the

load. If output exceeds 30A, the resettable circuit breaker will trip (#15).

15. 30A resettable circuit breaker: >30A over-current protection for Anderson connector (#14).

16. CIG Socket: 12V 12A Max Output. When overload or short-circuit event occurs, LCD screen

displays OVERLOAD, and error icon and DC LED back-light will turn red. To recover,

disconnect and re-connect the load.

17. White USB port: 5V 2.4A Output. No indication is provided for short-circuit or over-current

protection. Disconnect and re-connect with the appropriate load when short-circuit or over-

current protection occurs.

18. Orange USB Socket: 5V/9V/12V, 3A Max Output, 18W Max. No indication is provided for short-

circuit or over-current protection. To recover, disconnect and re-connect the load.

19. 30W Type-C Socket: 5V/9V/12V, 3A Max Output, 30W Max. No indication is provided for short-

circuit or over-current protection. To recover, disconnect and re-connect the load.

20. LED Light: LED light has three modes, low light, bright light and pulse mode.

21. AC Socket: Support 230V, 600W pure sine wave output. When overload or short circuit event

occurs, LCD screen displays OVERLOAD, displayed error icons and AC LED backlight

will turn red. To recover, disconnect and re-connect the load.

22. Wireless Charging: 15W Max Output. Ensure mobile phone is positioned in designated

charging zone on the COMPACT 600. When charging, Green Wireless Charge LED (#23) will be

displayed. If the mobile phone is positioned incorrectly or there is an issue with charging, the

red Wireless Charge LED (#23) will be displayed. To clear, reposition the mobile phone to the

designated charging area on the KickAss COMPACT 600 Lithium Power Station.

Refer to diagram on page 11 for component call out.

23. Wireless Charging Indicator Light: Displays the green LED when charging. Displays the red

LED when mobile phone is incorrectly placed or there is an issue with charging.

Refer to diagram on page 11 for component call out.

NOTE: When battery voltage <10.5V , KickAss COMPACT 600 Lithium Power Station will be in low

voltage protection. All outputs will be disabled.

NOTE: When no loads are detected for 5mins, KickAss COMPACT 600 Lithium Power Station

will enter standby mode.

WHAT IS INCLUDED

MAIN UNIT

5A ADAPTER CAR CHARGER CABLE

(OPTIONAL)

CABLE 4 BL205 RED BLACK UL 1015/20AWG/2C SP50A CONNECTER

+300MM + RED/BLACK CONNECTOR

BLACK 16AWG/WC

CIGARETTE MALE PLUG

TO SP50A CONNECTOR POWER CABLE

CHARGING YOUR KICKASS

COMPACT 600 LITHIUM POWER STATION

CHARGE FROM AC/DC ADAPTOR

5A ADAPTER

KickAss COMPACT 600 Lithium Power Station can be charged from the 8mm charging port and the

5A AC/DC power brick provided with the unit. When connected, charging information will be

displayed on the LCD display. The LCD display will indicate 100% once the unit has reached

full capacity.

NOTE: While charging, the AC/DC power brick will get warm, this is normal operation.

NOTE: Ensure only the supplied AC/DC power brick us used for charging.

DCDC CHARGING - ALTERNATOR INPUT

The KickAss COMPACT 600 Lithium Power Station can be charged from the vehicle alternator

using the cigarette socket to mini Anderson cable assembly supplied with the device. The LCD

display will indicate 100% once unit has reached full capacity.

CIGARETTE MALE PLUG

TO MINI ANDERSON

CIGARETTE

SOCKET

DCDC CHARGING - MPPT SOLAR INPUT (230W)

KickAss COMPACT 600 Lithium Power station can be charged with up to 230W Solar through the

Mini Anderson to 50A Anderson cable adapter provided with the unit.

Caution!

SOLAR PANELS

When connecting solar to the KickAss COMPACT 600 Lithium Power Station, ensure the

connected solar is unregulated i.e. no solar regulator or controller connected between the solar

panel and the KickAss COMPACT 600 Lithium Power Station.

The Voc rating of the connected solar should not exceed 60V or 230W Max power.

DCDC CHARGING - PWM SOLAR INPUT (100W)

SOLAR PANEL

The KickAss COMPACT 600 Lithium Power Station can be charged with up to 100W of Solar

through the 8mm DC port with a compatible Solar panel.

Caution!

When connecting solar to the KickAss COMPACT 600 Lithium Power Station, ensure the connected

solar is unregulated i.e. no solar regulator or controller connected between the solar panel and the

KickAss COMPACT 600 Lithium Power Station

The Voc rating of the connected solar should not exceed 24V or 100W Max power.

WIRELESS PHONE CHARGING

The KickAss COMPACT 600 Lithium Power Station can be used to charge wireless charging enabled

mobile devices. To start charging, ensure phone is located in the wireless charging zone on top of the

KickAss COMPACT 600 Lithium Power Station. Press the DC charging button and ensure the DC

LED back-light is blue. When charging, the green Wireless Charge LED will be displayed. If the

mobile phone is positioned incorrectly or there is an issue with charging, the red Wireless Charge

LED will be displayed. To clear, reposition mobile phone to the designated charging area on the

KickAss COMPACT 600 Lithium Power Station.

TECHNICAL SPECIFICATIONS

Solar Panel Input Range

8mm DC socket (PWM) Solar panel range

Mini Anderson Socket (MPPT) Solar panel range

5A Adaptor

Battery Capacity (LiFeO4)

Standby current

Under-voltage protection

Max. charging voltage

Low charging voltage

White USB port x 2 output

Orange QC3.0 USB port x 2 output

Car cigarette port

65W Type-C PD port x1 input/output

6mm DC output

Anderson Output

AC output x1 (pure Sine Wave)

AC overload protection

Qi Wireless Charging

LED light

Dimension of Main unit( L x W x H )

Net weight of Unit (W/0 Packing

）

30W Type-C port x 1 output

Anderson socket :12.5V~60VDC,230W Max/8mm DC

Socket: 15~24VDC 100W,Max

OCV 15~24VDC，100W Max / 8A Max，

OCV 12.5~60VDC, 230W Max / 15A Max

16V/5A

12.8V,40Ah, 512Wh

5mA

10.5V

14.2V

5VDC/2.4A 12W Max.

5/9/12VDC/ 18W Max.

12VDC/12A Max.

Input: 5~20VDC, 65W Max.

Output: 5/ 9/12/15/20VDC, 65W max.

12VDC 6A Max.

SP50A 12VDC 25A max

230V~50Hz (AU) 600W

610W~760W

15W Max.

1200/2400mcd min., 300mA Max.

185W x 305L x 202H mm

7.3kgs

5/ 9/12VDC, 30W Max.

WARRANTY INFORMATION

Warranty Period:

Warranty Inclusions:

Warranty Exclusions:

Our warranty is non-transferable and is only

oﬀered to the original purchaser of our

product.

Our warranty does not apply to:

1. damage caused by any improper use of

our product(s);

2. damage caused by faulty installation or

modiﬁcation made during installation;

3. damage caused by mould, insects,

animals, misuse, incorrect operation,

adverse weather, accidents and fair wear

and tear;

4. damage caused by exposure to excessive

sunlight;

5. costs, losses or charges:

6. of removing and reinstalling the product;

7. directly or indirectly associated with the

product failing to operate.

8. commercial use of KickAss products by

government organisations or commercial

ﬂeet applications;

9. KickAss products that are on-sold by the

customer or exported for use outside of

Australia.

How to Claim:

To make a claim visit supportportal.kickassproducts.com.au, email [email protected].

Please provide your proof of purchase (i.e. sales receipt) to assist with your warranty claim.

Once we approve your warranty claim, we will arrange (at our cost) return shipping of the faulty

product to an assessment facility of our choice. Once we have determined the cause of the defect,

we will contact you with the outcome of our assessment and advise whether the faulty product will be

repaired or replaced.

Australian Consumer Law:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You

are entitled to a replacement or refund for a major failure and compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods

fail to be of acceptable quality and the failure does not amount to a major failure.

KickAss Products Pty Ltd (KickAss) of 2 Mallet

Street, Kunda Park QLD 4556 oﬀers a 12

month warranty from date of purchase against

manufacturing defects in KickAss products.

Under ordinary usage conditions, this warranty

covers any defect in design or manufacture

which results in our product failing to perform

substantially as described in our advertising or

literature (i.e. product manuals).

Where we are at fault during the warranty

period, we will either repair or replace the

product (or part of the product) at our

discretion. When a product is repaired or

replaced under this warranty, the original

warranty period is not renewed or extended.

This warranty is provided in addition to your

other rights and remedies under the Australian

Consumer Law and does not exclude, restrict,

modify, limit or override your rights under the

Australian Consumer Law.

KICKASSPRODUCTS.COM.AU

KickAss KACOMP600-LI User manual

KickAss KACOMP600-LI User manual

KickAss KACOMP600-LI User manual

Related papers

Other documents