2. Kentrol
  3. 30716

Kentrol 30716 Installation guide

  • Hello! I'm a chat assistant that has reviewed the installation instructions for the Kentrol Door Alignment Pins. This document provides guidance on how to use the included top and bottom pins to facilitate the installation of Jeep TJ and JK Wrangler doors and also provides information of pin removal. I'm ready to answer your questions about this product.
  • Are these pins needed to remove the doors?
    Are the pins the same length?
    Do I need any tools to install the pins?
30716
Jeep® TJ and JK Wrangler
Door Alignment Pins
3071600
REQUIRED TOOLS
None
KIT CONTAINS
Top pin
Bottom pin
QTY
1
1
NOTE:
These pins are to aid in the installation of your doors. These
are not needed when removing your doors.
1) SCREW PINS ONTO DOOR HINGES
Noting the ‘T’ for top and ‘B’ for bottom, screw the
pins onto your factory door hinges finger tight.
2) INSTALL DOORS
Using the alignment pins as a guide, begin inserting
your top pin into your body hinges first. The pins are
designed at different lengths to allow you to focus
on inserting one pin at a time.
Once your top pin is lined up, align the bottom pin
and set the door into place.
3) REMOVE PINS
Once your door is installed, remove the pins to help
install the rest of your doors.
/