2. Kentrol
  3. 30717

Kentrol 30717 Installation guide

  • Hello! I've reviewed the installation instructions for the Kentrol Door Alignment Pins for the JL Wrangler. This document provides a step-by-step guide on how to use the alignment pins to properly install your vehicle doors. The pins feature a top and bottom design and are designed with different lengths to assist in the alignment process. I'm ready to answer any questions you may have about using these pins.
  • What is the purpose of these pins?
    Are these pins needed when removing doors?
    How should I install the pins?
30717
Jeep® JL Wrangler
Door Alignment Pins
3071700
REQUIRED TOOLS
None
KIT CONTAINS
Top pin
Bottom pin
QTY
1
1
NOTE:
These pins are to aid in the installation of your doors.
These are not needed when removing your doors.
1) SCREW PINS ONTO DOOR HINGES
Noting the ‘T’ for top and ‘B’ for bottom, screw the
pins onto your factory door hinges finger tight.
2) INSTALL DOORS
Using the alignment pins as a guide, begin inserting
your top pin into your body hinges first. The pins
are designed at different lengths to allow you to
focus on inserting one pin at a time.
Once your top pin is lined up, align the bottom pin
and set the door into place.
3) REMOVE PINS
Once your door is installed, remove the pins and re
secure the door.
/