SCE SCE-342424WS Installation Information

Type
Installation Information
keyboard-housing.pdf
1
sce-kbh keyboard housing
Remove keyboard shelf from workstation.
Stand the housing body up in a vertical position with the
keyboard opening to the top and insert through the rear
door opening.
Rotate the housing body to the horizontal position
between the channels.
Tilt the housing body to the horizontal position between
the channels and align the housing body with the
keyboard opening in the workstation.
Place keyboard shelf inside housing body, re-attach to
channel through the housing. Ensure the housing body is
firmly pressed against the keyboard opening.
Attach housing cover using supplied cage nuts and
screws.
1.
2.
3.
4.
5.
6.
Installation instructions:
2
5
4
Top View
ISO View
24” Side View Reference
32” Side View
keyboard-housing.pdf
2
Note: The keyboard shelf can be secured to housing
with supplied rivets prior to installing the housing body
for easier installation.
Note: This housing is not designed to be used as a shelf.
See notes
See notes
  • Page 1 1
  • Page 2 2

SCE SCE-342424WS Installation Information

Type
Installation Information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI