Zonet ZUN2200 Quick Installation Manual

2 Ports USB 2.0 CardBus

Quick Installation Guide

One 2 Ports USB 2.0 CardBus

One Quick Installation Guide

One Installation CD

One USB cable (USB 2.0 or USB 1.1 cable)

Windows 2000/ XP/ Vista

1. The operating system will automatically detects the hardware and installs driver files when

a USB adapter is plugged into your notebook computer’s PCMCIA CardBus slot. After the

computer finished installing all necessary files, you will see a message “Your New

Hardware is now installed and ready to use.” on the system tray.

2. If your notebook computer does not detect and/or install the driver files automatically,

please follow Windows 98SE/ME section Step 2. This will install all necessary files

from the Installation CD for you.

Windows 98SE/ME

1. Plug-in the USB adapter into your notebook computer’s PCMCIA CardBus slot before driver

installation.

2. Insert the Installation CD into your CD-ROM drive and double-click the setup program,

SETUP.exe. The following screen will appear on your screen. Click “Next”.

3. Select “Install USB Driver” and click “Next”. All necessary files will install to your computer

automatically.

4. Select “Yes, I want to restart my computer now.” And click “Finish”. This will finish the

driver installation and restart your system. Note: You must restart your computer after

the installation is finished; otherwise, the hardware will not work properly.

12-086-00737 Rev:01