Zonet ZUN2200 Quick Installation Manual

2 Ports USB 2.0 CardBus

Quick Installation Guide

One 2 Ports USB 2.0 CardBus

One Quick Installation Guide

One Installation CD

One USB cable (USB 2.0 or USB 1.1 cable)

Windows 2000/ XP/ Vista

1. The operating system will automatically detects the hardware and installs driver files when

a USB adapter is plugged into your notebook computer’s PCMCIA CardBus slot. After the

computer finished installing all necessary files, you will see a message “Your New

Hardware is now installed and ready to use.” on the system tray.

2. If your notebook computer does not detect and/or install the driver files automatically,

please follow Windows 98SE/ME section Step 2. This will install all necessary files

from the Installation CD for you.

Windows 98SE/ME

1. Plug-in the USB adapter into your notebook computer’s PCMCIA CardBus slot before driver

installation.

2. Insert the Installation CD into your CD-ROM drive and double-click the setup program,

SETUP.exe. The following screen will appear on your screen. Click “Next”.

All manuals and user guides at all-guides.com

all-guides.com

3. Select “Install USB Driver” and click “Next”. All necessary files will install to your computer

automatically.

4. Select “Yes, I want to restart my computer now.” And click “Finish”. This will finish the

driver installation and restart your system. Note: You must restart your computer after

the installation is finished; otherwise, the hardware will not work properly.

12-086-00737 Rev:01

All manuals and user guides at all-guides.com