Home Styles 5221-10 Assembly Instructions

Type
Assembly Instructions

Home Styles 5221-10 is an easy-to-assemble chair that is perfect for any home. With its sturdy construction and comfortable design, this chair is sure to provide years of enjoyment.

The chair comes with all of the necessary hardware and instructions for assembly, and it can be put together in just a few minutes. The chair is also backed by a 30-day satisfaction guarantee, so you can be sure that you will be happy with your purchase.

Here are some of the features of the Home Styles 5221-10 chair:

  • Sturdy construction: The chair is made of high-quality materials and is built to last.
  • Comfortable design: The chair has a comfortable seat and back, and it is designed to provide good support.

Home Styles 5221-10 is an easy-to-assemble chair that is perfect for any home. With its sturdy construction and comfortable design, this chair is sure to provide years of enjoyment.

The chair comes with all of the necessary hardware and instructions for assembly, and it can be put together in just a few minutes. The chair is also backed by a 30-day satisfaction guarantee, so you can be sure that you will be happy with your purchase.

Here are some of the features of the Home Styles 5221-10 chair:

  • Sturdy construction: The chair is made of high-quality materials and is built to last.
  • Comfortable design: The chair has a comfortable seat and back, and it is designed to provide good support.
Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
888-680-7460, 877-831-0319
20 05221 0010
Chair
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hex Wrench
1 pc.
M8x50
Head Cap Bolt
8 pcs. (+1 extra)
D.
Foot
4 pcs.
B.
Chair
1 pc.
C.
Back Support
1 pc.
A.
Back
1 pc.
Flat Washer
8 pcs. (+1 extra)
Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Keep Hex Wrench as the bolts may need to be tightened in the future.
A
STEP 3
Place Back (A) onto unit.
STEP 2
Turn unit to its’ upright position.
Attach Back Support (C) to unit.
(See Figure 3)
Attach back flap of Back
Support (C) to back of unit.
C
Figure 3
STEP 1
Open zipper at bottom of Chair (B),
remove Feet (D) and close zipper.
(See Figure 1)
Attach Feet (D) to Chair (B) with
Flat Washers and Head Cap Bolts.
(See Figure 2)
Figure 1 Figure 2
B
D
D
D
D
Head Cap Bolt
Flat Washer
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
888-680-7460, 877-831-0319
  • Page 1 1
  • Page 2 2
  • Page 3 3

Home Styles 5221-10 Assembly Instructions

Type
Assembly Instructions

Home Styles 5221-10 is an easy-to-assemble chair that is perfect for any home. With its sturdy construction and comfortable design, this chair is sure to provide years of enjoyment.

The chair comes with all of the necessary hardware and instructions for assembly, and it can be put together in just a few minutes. The chair is also backed by a 30-day satisfaction guarantee, so you can be sure that you will be happy with your purchase.

Here are some of the features of the Home Styles 5221-10 chair:

  • Sturdy construction: The chair is made of high-quality materials and is built to last.
  • Comfortable design: The chair has a comfortable seat and back, and it is designed to provide good support.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI