Home Styles 5525-318 Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

Home Styles 5525-318 is a chair designed to provide a comfortable and stylish seating solution for your home. With its sturdy construction and easy assembly, this chair is a great choice for any room in your house. The chair features a comfortable seat and back, as well as sturdy legs that provide support and stability. The chair is also easy to clean and maintain, making it a great choice for busy families. Whether you're looking for a chair for your dining room, living room, or home office, the Home Styles 5525-318 is a great option.

Home Styles 5525-318 is a chair designed to provide a comfortable and stylish seating solution for your home. With its sturdy construction and easy assembly, this chair is a great choice for any room in your house. The chair features a comfortable seat and back, as well as sturdy legs that provide support and stability. The chair is also easy to clean and maintain, making it a great choice for busy families. Whether you're looking for a chair for your dining room, living room, or home office, the Home Styles 5525-318 is a great option.

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
M6x50
Head Cap Bolt
4 pcs. (+1 extra)
M6x70
Head Cap Bolt (long)
4 pcs. (+1 extra)
Small Hex Wrench
1 pc.
M6x40
Head Cap Bolt (short)
3 pcs. (+1 extra)
Flat Washer
11 pcs. (+1 extra)
Hex Wrench
1 pc.
M3.5x40
Wood Screw
4 pcs. (+1 extra)
Spring Washer
11 pcs. (+1 extra)
Chair
20 05525 0080
A.
Seat
1 pc.
B.
Side Stretcher
2 pcs.
C.
Center Stretcher
1 pc.
D.
Leg
1 pc.
E.
Leg
1 pc.
F.
Back Frame
1 pc.
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
Assembly Instructions 2/3
STEP 1
Attach Legs (D) and (E) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts, tightening
bolts only halfway.
(See Figure 1)
Attach Side Stretchers (B) to Legs (D) and (E) with Wood Screws.
(See Figure 2)
Slide ends of Center Stretcher (C) into pre-drilled holes
in middle of Side Stretchers (B).
(See Figure 3)
Figure 1
Figure 2
Figure 3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Wood Screw
A
B
C
D
E
B
Flat Washer
Wood Screw
Head Cap Bolt
(short)
Spring Washer
STEP 2
Attach Back Frame (F) to unit with Flat Washers, Spring Washers, Head Cap Bolts (short)
and Head Cap Bolts (long), tightening bolts only halfway. (See Figures 4 and 5)
Tighten all Head Cap Bolts used in Steps 1 and 2.
Attach Back Frame (F) to unit with Wood Screws.
Assembly Instructions 3/3
Figure 4 Figure 5
Head Cap Bolt (long)
Spring Washer
Flat Washer
F
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
888-680-7460, 877-831-0319
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Home Styles 5525-318 Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

Home Styles 5525-318 is a chair designed to provide a comfortable and stylish seating solution for your home. With its sturdy construction and easy assembly, this chair is a great choice for any room in your house. The chair features a comfortable seat and back, as well as sturdy legs that provide support and stability. The chair is also easy to clean and maintain, making it a great choice for busy families. Whether you're looking for a chair for your dining room, living room, or home office, the Home Styles 5525-318 is a great option.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI