Quintum DX Series DX2008 Supplementary Manual

Type
Supplementary Manual
www.quintum.com
Quintum Technologies, Inc.
Risk Free VoIP
www.quintum.com
Quintum’s New Line Of Digital Products Will
Support Up To 120 VoIP Channels and 8
T1/E1/PRI spans.
“MultiPath Switch” OR “Gateway” Configurations.
Fills The Gap Between The Tenor D Series and The
Tenor CMS.
Includes the “New” Tenor Configuration
Manager
Easy to use GUI based configuration tool.
Introducing The Tenor DX Series
New !
www.quintum.com
New Tenor DX Is Designed For Enterprises
and Small Service Providers
New higher density platform in the same Tenor footprint
Choice of Configurations.
MultiPath Switch – Available Ports for PBX & PSTN Connectivity
Gateway – Matching VoIP and Trunk ports
New features
TDM Circuit switching
Auto codec negotiation
User programmable dial plan
Quintum Tenor Configuration Manager (GUI).
www.quintum.com
Tenor DX Series Is Available With 1, 2, 3 or 4
Pairs of T1/E1/PRI Trunks
2 T1/E1 Ports
4 T1/E1 Ports
6 T1/E1 Ports
8 T1/E1 Ports
www.quintum.com
Tenor DX Series Is Available In A Variety Of
Options For Just The Right Fit
Configurations
2 Port T1/E1 Switch with 8, 16, 24, 30, 48 or 60 VoIP
channels
4 Port T1/E1 Switch with 48, 60, 96 or 120 VoIP channels
6 Port T1/E1 Switch with 120 VoIP channels
8 Port T1/E1 Switch with 120 VoIP channels
www.quintum.com
Tenor DX MultiPath Switch Configuration
VoIP MultiPath Switch Configuration
Symmetrical configuration with equal numbers of station side T1/E1
ports and trunk side T1/E1 ports
The number of VoIP ports is half
the total number of telephony ports
Calls can be routed in any direction between any of the ports
Easy drop-in installation, no PBX changes required
VoIP Gateway
PSTN
IP Network
Station Side
T1/E1 Ports
PBX,
Keyswitch,
Phones
Trunk Side
T1/E1 Ports
www.quintum.com
New Tenor DX Series “MultiPath Switch”
Options
DX Series VoIP MultiPath Switches
T1/E1 VoIP Application
DX2008 2 8 T1/E1
DX2016 2 16 T1/E1
DX2024 2 24 T1
DX2030 2 30 E1
DX4048 4 48 2 x T1
DX4060 4 60 2 x E1
DX6120 6 120 T1/E1
DX8120 8 120 T1/E1
www.quintum.com
Tenor DX VoIP Gateway Configurations
VoIP Gateway Configuration (Station Side)
Configured for station side PTSN to VoIP Network communications
The number of VoIP ports is equal
to the number of telephony ports
Calls can be routed in any direction between any of the ports
VoIP Gateway
IP Network
Station Side
T1/E1 Ports
PBX,
Keyswitch,
Phones
www.quintum.com
Tenor DX VoIP Gateway Configurations
VoIP Gateway
PSTN
IP Network
Trunk Side
T1/E1 Ports
VoIP Gateway Configuration (Trunk Side)
Configured for trunk side PTSN to VoIP Network communications
The number of VoIP ports is equal
to the number of telephony ports
Calls can be routed in any direction between any of the ports
www.quintum.com
New Tenor DX Series “Gateway” Options
DX Series VoIP Gateways
DX2048 2 48 2 x T1
DX2060 2 60 2 x E1
DX4096 4 96 4 x T1
DX4120 4 120 4 x E1
T1/E1 VoIP Application
www.quintum.com
Upgrading Tenor DX Series
The telephony ports can not be upgraded.
The ports are fixed at 2, 4, 6, or 8 T1/E1/PRIs
Software upgrades are limited by the hardware
configurations required to support the wide range of
options.
The basic DX2008 is not software upgradeable. It is a fixed
configuration that will only support 8 VoIP channels.
The DX 2016 is upgradeable to DX2024 or DX2030
The DX 2024 is upgradeable to DX2030
The DX4096 is upgradeable to DX4120
www.quintum.com
The Tenor DX Series’ Flexibility Offers
Solutions For Enterprises & Service Providers
Provides up to 4 “pairs” of trunks to more cost
effectively address the need for multiple digital trunks.
Offers a complete MultiPath solution for easy
deployment in large enterprises.
Offers the option for additional trunks to support TDM
switching for service provides and PSTN backup for
local access providers.
Offers a cost effective “gateway” option for service
providers who do not require switching.
www.quintum.com
Tenor Configuration Manager Makes Tenor
Even Easier To Configure
Quintum has developed a completely new Graphical
User Interface for the new DX Series products.
This web-based tool enables the user to set
configuration parameters using an intuitive graphical
interface.
The Tenor Configuration Manager can configure a
remote unit anywhere in the IP network from the
user’s PC.
The Tenor Configuration Manager consists of a Java
application which can be loaded on any PC using
Windows 2000 or Windows XP operating systems.
www.quintum.com
The Tenor Configuration Monitor Offers
A Easy To Use GUI
www.quintum.com
The Tenor DX Series And Tenor
Configuration Manager Are Now Available
Tenor DX
Available – Now
Official Announcement – November
The Tenor Configuration Manager will be
included with the Tenor DX at no additional
charge.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Quintum DX Series DX2008 Supplementary Manual

Type
Supplementary Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages