Valeton GP-100 Firmware Update Manual

Brand
Valeton
Model
GP-100
Type
Firmware Update Manual

Valeton GP-100 is a versatile guitar processor that combines professional sound quality with a user-friendly interface, allowing guitarists of all levels to explore a wide range of tones and effects. With its powerful DSP engine and extensive connectivity options, the GP-100 empowers musicians to create and sculpt their own unique sound, making it an ideal choice for live performances, studio recording, and home practice.

Valeton GP-100 is a versatile guitar processor that combines professional sound quality with a user-friendly interface, allowing guitarists of all levels to explore a wide range of tones and effects. With its powerful DSP engine and extensive connectivity options, the GP-100 empowers musicians to create and sculpt their own unique sound, making it an ideal choice for live performances, studio recording, and home practice.

Firmware Update Guide
The contents of this manual are subject to change without notice.
Note: If your device cannot enter the GP-100 software interface normally, try the following methods.
1. Download new firmware and software file from Valeton (www.valeton.net):
Go to our official website and click “Support” - “Firmware” or “Software” option, download the latest firmware
and the latest software.
2. Unzip the downloaded firmware package (the firmware file should be a .bin file).
3. Run GP-100 software setup to install the new software.
4. Connect your GP-100 to the computer with a USB cable. A “Device Connected” message will be appear on the
computer screen and enter the GP-100 software interface:
If you cannot access the software edit interface after a long time, please restart the GP-100 and software.
5. Click the button (Settings) in the top right cornerof the GP-100 software, click Update Firmware option.
6. Click the button, browse and choose your firmware file in pop-up, then click the “update firmware”
button, the firmware update progress will begin automatically.
7. A progress bar will appear on the computer screen to indicate updating progress.
8. When the firmware upgrade progress reaches 100%, the progress bar will disappear, then a “No Device
connected” message will appear on the computer screen. This indicate update progress completed. After that,
just restart your GP-100 and enjoy the changes brought by the new firmware.
In order to optimize unit performance and fix bugs (please see update notes for details), we recommend all GP-
100 users to upgrade in time to get the best user experience. Be sure to update with latest GP-100 software.
Before
How To Update The Firmware
Other methods to update
1. Disconnect the power supply while keeping USB
connection.
2. Hold the 2 footswitches along with the PARA
Knob, and connect the power supply.
3. Launch GP-100 software and click “Update” button.
Browse and choose your firmware file.
Wait till it is finished, restart your GP-100, and DONE!
  • Page 1 1
  • Page 2 2

Valeton GP-100 Firmware Update Manual

Brand
Valeton
Model
GP-100
Type
Firmware Update Manual

Valeton GP-100 is a versatile guitar processor that combines professional sound quality with a user-friendly interface, allowing guitarists of all levels to explore a wide range of tones and effects. With its powerful DSP engine and extensive connectivity options, the GP-100 empowers musicians to create and sculpt their own unique sound, making it an ideal choice for live performances, studio recording, and home practice.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents