Astral Pool ASTRAL VIRON CONNECT 10 Setup And Operation Manual

Brand: Astral Pool

Model: ASTRAL VIRON CONNECT 10

Type: Setup And Operation Manual

This manual is also suitable for

VC10-SLX

Astral Pool ASTRAL VIRON CONNECT 10 is an innovative device that allows seamless control and customization of your pool's lighting system. With its user-friendly interface and advanced features, it empowers you to create a captivating ambiance for your outdoor oasis.

The ASTRAL VIRON CONNECT 10 enables you to effortlessly switch between a spectrum of fixed colors, including vibrant blue, enchanting magenta, fiery red, radiant orange, lush green, tranquil aqua, and pure white. It also offers dynamic color show options like the mesmerizing Rainbow and Ocean patterns, as well as the captivating Disco mode.

ASTRAL POOL – VC10-SLX SET-UP & OPERATION MANUAL

1 From the MAIN MENU Screen

Press SET UP.

5 Press CHANGE.

2 Press RIGHT ARROW.

4 Enter PASSWORD 1234

Press DONE.

6 Press SET UP WIZARD.

3 Press INSTALLATION SET UP.

ASTRAL VIRON CONNECT 10 CONTROLLER (VC10-SLX)

Aqua-Quip’s VC10-SLX compatible pool lights

(marked “SUITS ASTRAL VIRON CONNECT” on the rear of the

pool light) can also be operated from a standard Wall Switch.

See attached sheet “Wall Switch Procedure”.

When operated from an Astral Viron Connect 10 Controller, follow the setup and

operating instructions below.

AQUA-QUIP POOL LIGHTS

SET-UP AND

OPERATION MANUAL

ASTRAL POOL – VC10-SLX SET-UP & OPERATION MANUAL

SET-UP AND

OPERATION MANUAL

AQUA-QUIP POOL LIGHTS

9 Select a name for Lighting Zone 2 (if needed)

If the lights for Zone 2 are Multi-Colour,

then check the “Zone supports multi-colour

lighting” box.

Press NEXT.

8 Select a name for Lighting Zone 1.

If the lights for Zone 1 are Multi-Colour,

check the “Zone supports multi-colour

lighting” box.

Press NEXT.

7 Select the number of lighting zones in your

installation (maximum = 4).

Then Press NEXT on the next 4 screens (as

they are unrelated to Lighting Setup), until

you reach the “Set Up – Channel 1 screen”.

Depending on what equipment is connected

and allocated to the various channels in your

installation, keep pressing NEXT until an

available (unused) Channel is displayed.

If you want to control lighting zones

independently (example: the pool is Blue and

the spa is Green) then you will need a separate

transformer per zone.

Each transformer will plug into an available

(unused) Channel on the Viron Connect 10.

If you have just one transformer, then all lights

connected to that transformer will display the

same colour.

Press NEXT.

10 Select SLX.

Press NEXT.

ASTRAL POOL – VC10-SLX SET-UP & OPERATION MANUAL

AQUA-QUIP POOL LIGHTS

SET-UP AND

OPERATION MANUAL

11 In this case, Channel 3 is available

(unused), so Press LIGHTING.

Press NEXT.

15 Regardless of what colours are shown

in the Colour Box on the screen, you will

need to synchronise the Controller with

the Aqua-Quip VC10SLX lights.

16 Press all Lighting Zones ON.

Aqua-Quip VC10SLX lights will light

up Blue when turned on for the very

first time.

12 Select whether the transformer and pool

lights plugged into Channel 3 will be for

Pool or Spa. Press NEXT.

13 Select whether you are using fixed-colour

or multi-colour lights on Channel 3.

Press NEXT.

Repeat this set up procedure for following

subsequent channels (if needed).

Once the last Lighting Channel has been set up,

then EXIT all the way back to the Main Menu.

14 From the Main Menu screen, press

LIGHTING.

ASTRAL POOL – VC10-SLX SET-UP & OPERATION MANUAL

AQUA-QUIP POOL LIGHTS

SET-UP AND

OPERATION MANUAL

18 Then Press BLUE for all other Lighting

Zones. The Viron Connect 10 relays will

start switching the lights on/off. The lights

will not yet be synchronised.

19 Press the SYNC button for the Pool Zone

and then the other Zones (if any).

All the lights should then synchronise and

be displaying the BLUE colour.

Automatic Pool Cleaners (Australia) Pty Ltd

40 Percy Street, Auburn NSW 2144

Ph: 02 9643 8338 Fax: 02 9643 8448

www.aquaquip.com.au

Notes regarding Aqua-Quip’s emulation of the

Astral SLX Programming:

* Customised Colour feature is available, but

will have to be carried out manually, i.e unplug

the transformer from the Viron Connect 10

and plug it into a power point, follow the

instructions in the Viron Connect 10 manual

to set your customised colour.

** Customised Pattern and dimming feature

is not available – it has been replaced by

FIREWORKS mode.

Astral Program Name Aqua-Quip Emulation

PROGRAM NUMBER

BLUE BLUE

MAGENTA MAGENTA

RED RED

ORANGE ORANGE

GREEN GREEN

AQUA AQUA

WHITE WHITE

USER 1 – CUSTOMISED COLOUR CUSTOMISED COLOUR*

CUSTOM – CUSTOMISED PATTERN FIREWORKS**

R’BOW – RAINBOW PATTERN RAINBOW PATTERN

OCEAN – OCEAN PATTERN OCEAN PATTERN

DISCO – DISCO PATTERN DISCO PATTERN

20 Now that the lights are synchronised,

you can change the colour of the lights

in each zone.

ZONE ON/OFF COLOUR BOX SYNCH.

17 Press the Colour Box for the Pool Lighting

Zone, and an array of Fixed Colours and

Colour Show options will appear.

Press BLUE (top left).

Astral Pool ASTRAL VIRON CONNECT 10 Setup And Operation Manual

Brand: Astral Pool

Model: ASTRAL VIRON CONNECT 10

Type: Setup And Operation Manual

This manual is also suitable for

VC10-SLX

Download PDF

report

Astral Pool ASTRAL VIRON CONNECT 10 Setup And Operation Manual

This manual is also suitable for

Astral Pool ASTRAL VIRON CONNECT 10 Setup And Operation Manual

Related papers

Other documents