2. NEC
  3. Express5800/180Rb-7
Express5800/180Rb-7

NEC Express5800/180Rb-7 Release Notes

  • Hello! I am an AI chatbot trained to assist you with the NEC Express5800/180Rb-7 Release Notes. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
System Release Notes
Express5800/180Rb-7 PCI-X
System Release Notes
PN: 455-01612-002
Proprietary Notice and Liability Disclaimer
The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc.
and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights
to this document, including all design, manufacturing, reproduction, use, and sales rights
thereto, except to the extent said rights are expressly granted to others.
The NEC Computers Inc. product(s) discussed in this document is warranted in accordance
with the terms of the Warranty Statement accompanying each product. However, actual
performance of each such product is dependent upon factors such as system configuration,
customer data, and operator control. Since implementation by customers of each product
may vary, the suitability of specific product configurations and applications must be
determined by the customer and is not warranted by NEC Computers Inc.
To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC Computers Inc. is prohibited.
Trademarks
Windows 2000 and Windows NT are registered trademarks of Microsoft Corporation.
Novell and NetWare are registered trademarks of Novell, Inc.
SCO OpenServer is a trademark of Caldera Systems, Inc.
UnixWare is a registered trademark of Caldera Systems, Inc.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks
of their respective trademark owners.
February 2002
Copyright 2001, 2002
NEC Computers Inc.
15 Business Park Way
Sacramento, CA 95826
All Rights Reserved
Express5800/180Rb-7 PCI-X
System Release Notes
The Express5800/180Rb-7 PCI-X System Release Notes provide up-to-date
information on your system. These notes also provide additional valuable
information about your system that was not included in the user’s guide.
Please read these notes in their entirety.
CONTENTS
Introduction ............................................................................................................................................3
General Comments .................................................................................................................................3
Advisories...............................................................................................................................................3
EXPRESSBUILDER .........................................................................................................................3
System Hardware...............................................................................................................................4
Console Redirection Configuration....................................................................................................5
nec
Express5800/180Rb-7 System Release Notes 3
Introduction
These System Release Notes cover the following topics:
!
General Comments
!
Advisories
General Comments
The following general comments apply to this server.
!
Versions of the Network Operating Systems tested and recommended are:
Windows
®
2000
Windows NT
®
4.0 Server with Service Pack 6
Novell
®
NetWare
®
5.1
Advisories
This section contains advisories on the EXPRESSBUILDER, system hardware,
console redirection configuration, and system documentation.
EXPRESSBUILDER
The following advisory applies to EXPRESSBUILDER.
!
EXPRESSBUILDER EasySetup always configures the Windows 2000
TCP/IP Protocol IP settings to "Obtain an IP address automatically"
(DHCP), regardless of the IP address setting specified in EasySetup. If static
TCP/IP addressing is required, TCP/IP must be reconfigured. Refer to
Windows documentation for instructions.
!
After installing Windows 2000, the Windows 2000 Device Manager may
show an NEC GEM SCSI Processor Device and/or an Unknown Device
under Other Devices. The Unknown Device is a reference to the baseboard
management controller. Installing the ESMPRO Agent can clear both of
these conditions.
!
If you already have an operating system installed when creating a
maintenance partition, EXPRESSBUILDER will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition.
!
The Administrator Menu in the System Information Management segment
of the Offline Maintenance Utility is accessible only by NEC authorized
service representatives.
4 Express5800/180Rb-7 System Release Notes
!
EXPRESSBUILDER operates in floppy emulation mode. The emulated
floppy drive portion of your system CD-ROM is designated Drive A and the
remaining portion(s) of the CD-ROM is designated Drive Q. Your system
diskette drive is Drive B. After creating the Off-line Maintenance Utility
diskette, EXPRESSBUILDER prompts you to remove the diskette from
Drive B. At this prompt, remove the diskette from your diskette drive.
!
Always ensure that the "Console Redirection" feature in the BIOS Setup
Utility of your system is disabled prior to booting from the
EXPRESSBUILDER CD-ROM. Console Redirection must be re-enabled to
provide DPC console remote access once the EXPRESSBUILDER
CD-ROM is removed.
!
If any DOS command level errors in EasySetup or Custom Setup occur on
the Express5800/180Rb-7 the resulting error messages will not display on
the system monitor and the DOS bootable side of EXPRESSBUILDER will
appear to be frozen (unresponsive). Such error messages would occur if the
wrong media is mounted in the CD-ROM or floppy drives. If this condition
continues to occur you should verify that the proper media is mounted in the
CD-ROM or floppy drives.
System Hardware
The following advisory applies to the Plug and Play feature of your server's I/O
expansion boards.
The factory standard default value (Hot-Plug PCI Master Control) of the
Plug N Play feature in your server is enabled. The Windows 2000
operating system requires that the Hot-Plug PCI Master Control feature
be enabled. To disable it, if required by your operating system, the Hot-
Plug PCI Master Control feature in the Advanced Submenu of the BIOS
Setup Utility described in Chapter 3 "BIOS Setup Configuration Settings"
can be changed to "disabled."
Express5800/180Rb-7 System Release Notes 5
Console Redirection Configuration
The following advisory applies when using console redirection
configuration in your server system.
!
When configuring console redirection for Direct Platform Control
(DPC) the Emergency Management Port (EMP) access mode must
be set to "Always Active" for the DPC to function properly.
Note
: The EMP access mode is normally set to
"Disable" by default.
!
If using console redirection and booting from a Mylex RAID
controller, the option ROM scan for the Embedded SCSI PCI Device
must be disabled. Failure to disable the option ROM scan for the
embedded SCSI controller results in the POST error message:
"Expansion ROM not initialized - PCI Mass Storage Controller
Press <F1> to Resume, <F2> to Setup".
/