NEC Express5800/120Le Release Notes

Brand: NEC

Model: Express5800/120Le

Type: Release Notes

NEC Express5800/120Le is a versatile and powerful server designed to meet the demands of businesses of all sizes. With its exceptional performance, scalability, and reliability, the Express5800/120Le is ideal for a wide range of applications, including file and print serving, database management, web hosting, and email.

The Express5800/120Le is powered by a 1.2GHz Intel Pentium III processor and has a maximum memory capacity of 2GB. It comes standard with two 18GB hard drives, providing ample storage space for your data. The server also has four PCI slots, allowing you to add additional expansion cards to meet your specific needs.

System Release Notes

Express5800/120Le

System Release Notes

PN: 455-01601-001

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is

the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc.

and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights

to this document, including all design, manufacturing, reproduction, use, and sales rights

thereto, except to the extent said rights are expressly granted to others.

The NEC Computers Inc. product(s) discussed in this document was warranted in

accordance with the terms of the Warranty Statement accompanying each product.

However, actual performance of each such product is dependent upon factors such as

system configuration, customer data, and operator control. Since implementation by

customers of each product may vary, the suitability of specific product configurations and

applications must be determined by the customer and is not warranted by NEC Computers

Inc.

To allow for design and specification improvements, the information in this document is

subject to change at any time, without notice. Reproduction of this document or portions

thereof without prior written approval of NEC Computers Inc. is prohibited.

Trademarks

Windows 2000 and Windows NT are registered trademarks of Microsoft Corporation.

Novell and NetWare are registered trademarks of Novell, Inc.

SCO OpenServer is a trademark of The Santa Cruz Operation, Inc.

UnixWare is a registered trademark of The Santa Cruz Operation, Inc.

All other product, brand, or trade names used in this publication are the trademarks or registered trademarks

of their respective trademark owners.

455-01601-001 April 2001

NEC Computers Inc.

15 Business Park Way

Sacramento, CA 95826

Express5800/120Le

System Release Notes

The Express5800/120Le System Release Notes provide up-to-date information

on your system. These notes also provide additional valuable information about

your system that was not included in the user’s guide.

Please read these notes in their entirety.

CONTENTS

Introduction ............................................................................................................................................3

General Comments .................................................................................................................................3

Advisories...............................................................................................................................................3

EXPRESSBUILDER .........................................................................................................................3

System Hardware...............................................................................................................................4

SCO....................................................................................................................................................4

nec

Express5800/120Le System Release Notes 3

Introduction

These System Release Notes cover the following topics:

General Comments

Advisories

General Comments

The following general comments apply to this server.

Versions of the Network Operating Systems tested and recommended are:



Windows

2000



Windows NT

4.0 Server with Service Pack 6



Novell

NetWare

5.1



SCO OpenServer

™

5.05 with Maintenance Supplement 505A.



UNIXWare

7.1.1

Advisories

This section contains advisories on the EXPRESSBUILDER, system hardware,

and SCO.

EXPRESSBUILDER

After installing Windows 2000, the Windows 2000 Device Manager may

show an NEC GEM SCSI Processor Device and/or an Unknown Device

under Other Devices. The Unknown Device is a reference to the baseboard

management controller. Both of these conditions can be cleared by installing

the ESMPRO Agent.

If you already have an operating system installed when creating a

maintenance partition, EXPRESSBUILDER will warn you of the existing

partition. If you want to preserve the installed operating system, do not

create the maintenance partition or the existing operating system will be

overlaid by the maintenance partition.

EXPRESSBUILDER EasySetup always configures the Windows 2000

TCP/IP Protocol IP settings to "Obtain an IP address automatically"

(DHCP), regardless of the IP address setting specified in EasySetup. If static

TCP/IP addressing is required, TCP/IP must be reconfigured. Refer to

Windows documentation for instructions.

The Administrator Menu in the System Information Management segment

of the Offline Maintenance Utility is accessible only by NEC authorized

service representatives.

4 Express5800/120Le System Release Notes

EXPRESSBUILDER operates in floppy emulation mode. The emulated

floppy drive portion of your system CD-ROM is designated Drive A and the

remaining portion(s) of the CD-ROM is designated Drive Q. Your system

diskette drive is Drive B. After creating the Off-line Maintenance Utility

diskette, EXPRESSBUILDER prompts you to remove the diskette from

Drive B. At this prompt, remove the diskette from your diskette drive.

System Hardware

The following advisory applies to the USB ports on your server's external device

I/O connectors.

The factory standard default value of the USB ports on your server is

"Disabled". To enable them, the USB Controller feature in the Peripheral

Configuration Submenu of the BIOS Setup Utility described in Chapter 3

"BIOS Setup Configuration Settings" must be changed to "Enabled".

The following advisory applies to the Plug and Play feature of your server's I/O

expansion boards.

The factory standard default value (PnP O/S) of the Plug N Play feature

in your server is selected. The Windows 2000 operating system requires

that the PnP O/S feature be selected. To deselect it, if required by your

operating system, the Installed O/S feature in the Advanced Submenu of

the BIOS Setup Utility described in Chapter 3 "BIOS Setup

Configuration Settings" can be changed to "Other."

SCO

The following advisory applies when using SCO 5.05:

During the installation of SCO or any time thereafter when booting SCO a

warning message may appear as follows:

WARNING: Cannot connect to APM, error 0x0036 System loaded, press <Return> to start:

To prevent the WARNING message from appearing, boot the system to single-

user Mode. Edit the /etc/default/boot file. Add "apm.check=no" to the end of the

line indicated by the "DEFBOOTSTR=" entry.

NEC Express5800/120Le Release Notes

NEC Express5800/120Le Release Notes

NEC Express5800/120Le Release Notes

Related papers