Page 5 MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
Snap MOD Live into goggles
1. Remove the lens from the goggle frame.
Seeinstruconsprovidedbythegoggle
manufacturer.
2. Ontheframeofyourgoggles,removethe
protecvebadgefromthelesideofthe
frame. This will reveal slots for MOD Live
to be inserted.
3. Next,insertMODLiveintothegoggle
frame as follows: with the goggles facing
you,snaptheMODLivemicroopcs
displayunitintotheleinnercornerof
theframe.Next,insertthebaerypack
into the right corner.
4. Push the MOD Live cable into the groove
sothatittsghtly.
5. Ifthecableistooshort,tugitgentlyso
the white stripes appear. If the cable is
toolong,pushitbackin.
6. Insertthelensbackintothegoggles.Take
care not to touch or smudge the lens.
OnlyusegogglesthatareRecon-Ready®.2011ReconReady™partnersinclude:
Uvex®,Briko®,Zeal®,andAlpina®.
LearnmoreaboutRecon-Readygogglesathp://www.ReconReady.com