Shine Decor 150ft Dimmable 110V-120V LED Strip Lights, 6500K Cool White LED Light Strip, Cuttable LED Strip Lighting, SMD 2835 120LEDs/M Outdoor Waterproof LED Rope Lights, 430 Lumen Commercial Light User guide

Model: 150ft Dimmable 110V-120V LED Strip Lights, 6500K Cool White LED Light Strip, Cuttable LED Strip Lighting, SMD 2835 120LEDs/M Outdoor Waterproof LED Rope Lights, 430 Lumen Commercial Light

SHINE DECOR

RF Dimmer Pairing and Unpairing Instructions

When the remote is not working and LED is flashing in an uncontrolled way, it’s probably because

the remote is inadvertently paired to a nearby object and become unpaired from the controller.

Remote Pairing

1. switch off the power

2. hold down the brightness up button for 5 seconds

3. switch on the power

4. led start flashing showing your remote is now fully paired to the controller

5. try the remote to see if it's working

Remote Unpairing

1. switch off the power

2. hold down the brightness down button for 5 seconds

3. switch on the power

4. led start flashing showing your remote is now unpaired from the controller

5. try the remote to see if it’s working

NOTE: you can use one remote to control several lights once you’ve paired this one remote to

each controller individually. You can also use individual remote to control individual controller.

Model: 150ft Dimmable 110V-120V LED Strip Lights, 6500K Cool White LED Light Strip, Cuttable LED Strip Lighting, SMD 2835 120LEDs/M Outdoor Waterproof LED Rope Lights, 430 Lumen Commercial Light