Watts 528 Quick Set-up

1

A Watts Water Technologies Company

1. Location

2. Remove Mounting Base

3. Install Mounting Base

Thermostat

Base

Adaptor

Plate 007

Switch

Box

OR

Thermostat

Base

Wall

Exterior

Wall

Behind

Door

Interior

Wall

5 feet

1.5 m

tekmarNet

®

2 Thermostat 528

Quick Setup Guide

528

_

Q

02/14

Zoning

Replaces: 12/13

2

A Watts Water Technologies Company

4. Wiring

5. Switch Settings

12 34

tN2 Manager, Module

or Wiring Center

tN2 tN2

Slab Sensor 079, or

Outdoor Sensor 070, or

Indoor Sensor 076, 077, 084

1234

tNt 528

528

One Stage Heat

Mmm YYYY

Lot # 12345

Meets Class B:

Canadian ICES

FCC Part 15

1023-02

tN2

1

tN2

2

Switch Settings:

For instructions see brochure

Use at least 65°C conductors

ON

Sensor

34

Setback

Scene

Lock

Not used

Unlock

Oﬀ

No Power

Switch Setting Location

Switch

Position

Action

1

ON

SETBACK Allow thermostat to respond to

available schedule. Requires Timer 033.

OFF OFF No setback schedule response.

2

ON

SCENE Allow thermostat to respond to

scenes. Requires User Switch 479.

OFF OFF No scene response.

3

ON

LOCK Locked to ‘User’ access level. Set to

Lock when installation completed.

OFF

UNLOCK Unlock to access all settings. Set

to Unlock during installation.

4

ON Not used

OFF Not used

3

A Watts Water Technologies Company

6. Close Thermostat

pivot

tab

8. Critical Settings

The following settings are essential to the successful operation of the system.

Important

Note: Set switch setting #3 and tekmarNet

®

system control to Unlock to change

Access level to Installer. Return to Lock setting once installation has been completed.

• Press and hold down both the and buttons for 2 seconds

to change from one step to the next.

• Release both buttons once the step has been reached.

• Press the or the button to change the setting, if

available.

• Press and hold down both the and buttons for 2

seconds to go to the next step, OR

• After 10 seconds of no button activity, the display goes

back to normal operation.

Press

+

Together

7. User Interface

All specifications are subject

to change without notice

4 528_Q - 02/14.

A Watts Water Technologies Company. Head Ofﬁ ce: 5100 Silver Star Road, Vernon, B.C.

Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650

Web Site

: www.tekmarControls.com

For a full list of settings and operational details, please refer to the thermostat

Installation and Operation Manual (528_D) included with compatible

tekmarNet

®

controls or download the brochure from www.tekmarcontrols.com

8. Critical Settings (Continued)

Display Range Access Description

°F or °C

Default =

°F

Installer

User

TEMPERATURE UNITS

Press the or the button to

change from °F to °C and vice versa.

Set To:

H1

ADJUST

SUPPLY

OFF or

On

Default =

On

Installer

HEAT SUPPLY PUMP

During heating, select whether or not

the system supply pump should turn

on or be off to allow a zone group

pump per manifold.

Available when:

• A reset control is present on the

tekmarNet

®

system.

Set To:

H1

ADJUST

SUPPLY

OFF or

On

Default =

OFF

Installer

HEAT SUPPLY PUMP DELAY

During heating, select whether or not

the system supply pump should be

delayed by 3 minutes before coming

on (for thermal motor or wax actuator).

Available when:

• A reset control is present on the

tekmarNet

®

system.

Set To:

On or Off

Default =

On

Installer

ROOM SENSOR

Select whether the built-in air

temperature sensor is on or off.

Available when:

A floor sensor or room sensor is

installed on the auxiliary sensor

input.

Set To:

Off,

Room,

Outdoor,

Floor,

Floor dSP

Installer

AUXILIARY SENSOR

Select the type of auxiliary sensor.

Floor dSP = Show floor sensor reading

in upper number field.

Available when:

Auxiliary sensor automatically

detected.

Set To:

5

Une Entreprise de Watts Water Technologies

1. Emplacement

2. Retirez la base de montage

3. Installez la base de montage

Mur extérieur

Mur intérieur

5 pi.

1,5 m

Commutateur

boîte

OU

Base de

thermostat

Mur

Base de

thermostat

Plaque

adaptrice 007

tekmarNet

®

2 Thermostat 528

Guide d'installation rapide

528

_

Q

02/14

Zonage

Remplace: 12/13

Derrière

porte

Page is loading ...

Watts 528 Quick Set-up

This manual is also suitable for

Watts 528 Quick Set-up

in other languages

Related papers

Other documents