Celestron Case - NEXSTAR 8 9/11 OTAâ€™s User manual

#94004 – NEXSTAR 8 CARRYING CASE

Your NexStar 8 Carrying Case is designed to safely carry your NexStar 8 telescope as well as any Celestron 9.25”

or 11” SCT/EdgeHD Optical Tube. Your case also comes with a convenient storage pocket that holds all your

telescope’s standard accessories with room to expand.

Inside your case you will ﬁnd two dense foam spacers and a built-in compression strap designed to customize

the case for each telescope model. Conﬁgure the case for your telescope model (as shown below), and use the

compression strap buckle to hold the telescope securely inside the case.

When transporting and storing 9.25” or 11” Optical Tubes, always remember to place the corrector plate end

toward the wheels of the case. This will evenly distribute the weight of the telescope and ensure the visual back

(or focus knob) does not support the weight of the scope.

NEXSTAR 8SE

NexStar 8 shown with thick foam spacer under base.

9.25” OTA

9.25” Optical Tube shown with thin foam spacer

under corrector plate.

11” OTA

11” Optical Tube shown with no foam spacer required.

This manual is also suitable for

Download PDF