PC-200
Multi Memory PC Card
8716502001897
6/24
With this Multi Memory Reader/writer PC Card you can effortlessly read and write 5 types of memory
card via the type II PC Card slot of your notebook. You can access and exchange data with all your digital
equipment, with your PDA and digital camera with just a single card reader/writer. The Multi Memory
Reader/writer works with SmartMedia, Multi Media Card, Secure- Digital. Memory Stick and Memory Stick
Pro.
29 g.
54 (W) x 85 (L) x 4(H)mm
136 g.
225(W) x 155(L) x 33(H)mm
PC Card Multi Memory Reader/writer
User Manual
Windows 98SE/2000/ME/XP
PCMCIA slot
1,32 kg.
220 (W) x 200 (L) x 150(H)mm
5,28 kg.
420(W) x 350(L) x 340(H)mm
Data sheet: PC-200
P. 1-2.
Fits into the PC card slot type II of your notebook
No external power required;
powered directly by your notebook
Support standard SmartMedia card
Support standard Secure Digital card
Support standard MultiMedia card
Support standard Memory Stick card
Support Plug and Play function, easy to be used
Support the CompactFlashTM/PCMCIA-ATA/True IDE Standards.
CompactFlashTM Specification Version 1.4
PC Card Standard Release 8.0
AT-Attachment 4 Interface (ATA-4)
Support the Smart Media Standards.
Fully compatible with SmartMediaTM Electrical Specification Version 1.30
Fully compatible with SmartMediaTM Physical Format Specification Version 1.30
Fully compatible with SmartMediaTM Logical Format Specification Version 1.20
Support capacity 2/4/8/16/32/64/128MB
Build-in standard Smart Media hardware ECC circuit
Best performance with hardware sequencer control logic
Support the Memory Stick Standards.
Fully compatible with the Memory Stick Standard Format Specification Version 1.3
Support the Memory Stick PRO Standards
Fully compatible with the Memory Stick Standard Memory Stick PRO Format
Specification Version V1.00-01
Support capacity 256/512/1024MB
5. Support the Secure Digital Card Standards.
Secure Digital Memory Card Specification V1.0
Support the MultiMedia Card Standards.
MultiMediaCard System Specification 2.2
Host data transfer rate = 16.6Mbytes/sec (PIO4 data transfer).
Support CRC function to detect data errors automatically.
Write-protect capability for the MS Card, MS PRO Card, Secure Digital Card and
Smart Media Card.
Support the ISP(In-System-Programming) function that can easy update the firmware of
this controller or adapter any time at any where.
Working Voltage: 2.7V~3.6V, 4.5V~5.5V
Automatic sensing of PCMCIA or IDE host interface.
100-pin TQFP package.
Embedded Voltage detector: Cut Off Voltage = 2.7V.
Data sheet: PC-200
P. 2-2.
/
